Question about 1992 Toyota Camry V6

1 Answer

My 1992 toyota camry i put a new rebiuld motor the airbag light stays on and i have no power as i accelerate i mean step on gas no power

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Toyota Master
  • 3,433 Answers

Oops
sounds like the computer is confused. Jopefully not allis lost. Locate a scantool and see what's going on . You should get some codes that wull help you locate the area at fault. If you do get any codes and need help with the meaning(s), Let me know. You can try this first, since it is driveable, allthough poorly. With the scan tool, erase the codes after writing them down and then drive the vehicle. The computer memorizes thee paterns of several drive cycles. It will clean up false codes and verify any others. Any codes that are valid will again be posted for the scan too. If you find this not to help, consult a shop that can "flash" the computer, resetting its factory progtam.Good Luck and not to worry. It's repairable Ned

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is there an Airbag Recall for a 2000 Toyota Camry LE?


The only recall items I could find for that vehicle were Headlights, and accelerator cable defects. Those are probably expired by now...14 yrs. later.

Oct 20, 2014 | 2000 Toyota Camry

Tip

"A Question for TOYOTA ED,,,,", Need info for my 1992 Toyota Camry V6. Problem...


Hello again, I am the resident Toyota expert here at FixYa.

I work for a Toyota dealership, and, with this tip, I hope to shed some light on the alleged Toyota gas pedal issue, and bring some comfort to all of the Toyota owners that read this.

If this tip helps you, please click on the "helped" icon below. Thanks.

The first thing owners need to know is this:
There are TWO different manufactures of the gas pedals that Toyota uses in their cars. They are as follows:

C.T.S. and DENSO

The CTS pedal is the one currently being modified at your local Toyota dealerships. The government (specifically, NHTSA, has inspected and approved the ongoing repairs, take comfort that the government is very aware of the repair, and is in agreement with Toyota that this modification will cure any possibility of the accelerators 'stciking'.

Now, The DENSO pedal is markedly different, and has been found to have NO ISSUES of the alleged sticking condition.

Next, we need to address exactly WHICH cars have the allegedly affected gas pedal installed.

Look at your 17 digit Vehicle Identification number...If it starts with a ' J ', this denotes that you have a Japanese produced vehicle, and ALL Japanese produced vehicles will have the DENSO pedal fitted.
Again, the DENSO pedal has been shown to have no sticking issues.

If your car/truck has a 1, a 2, a 4 or a 5 in the first position of the VIN, this indicates that your vehicle is American production. If you have an American production vehicle, don't panic.

The CTS pedal is installed in about 50% of the American production vehicles. American production ALSO has the DENSO pedal fitted.

You can easily check to see which pedal you have, by looking at the black box that is connected to the moving part of the gas pedal. This is ABOVE the part where you press on with your foot

With a flashlight, illuminate the gas pedal in your car. If you cannot see a shiny silver metal plate on the side of the pedal box, that faces the brake pedal, you have a DENSO pedal. Look closer, and you will see the DENSO word visible on the side of the pedal assembly.

Again, DENSO pedals are not involved in the alleged 'sticky pedal issue'

The CTS pedal has a shiny silver metal plate on the side of the pedal, that faces the brake pedal. If you can see this shiny silver metal plate, you have the CTS pedal, and will need to take it to your Toyota service department, and they will modify the pedal. This procedure will take about 45 minutes.

Vehicles involved in the current CTS pedal modification:
Avalon
Camry
Corolla
Highlander
Tundra
Sequoia
Matrix

Vehicles NOT involved in the CTS pedal modification"
All Japanese production, AND
Yaris
FJ Cruiser
All SCION
Venza
Solara
Sienna

So, to sum up this tip...If you have a CTS pedal, it needs to be modified. As of this writing, I have personally modified over 150 pedals, and have YET to see one that was remotely sticky. Rest assured that the modification that your Toyota service department will eliminate any worries that you may have with regard to your gas pedal.

Hopefully, with this Tip, I have provided you some useful information, and, with this info, you will be able to know which pedal you have, and, if you DO have the CTS pedal, please make an appointment with your local Toyota dealership for the modification. ALl of the Toyota dealers have sufficient quantities of the repair parts on hand.

If you consider this tip helpful, please click on the helpful icon located below. If you want or need any more information, please feel free to post up a question in the question area located on this site, Preface your question with the following: "A Question for TOYOTA ED,,,,",

I will get right back to you.

Thanks for reading my tip

Toyota Ed
2-14-2009

on Mar 25, 2010 | Toyota Cars & Trucks

1 Answer

My 88 toyota camry wont accelerate when i step on the gas pedal


tests:

cruise at say 45mph ok?
if i accelerate , it bogs then catches up?
if i accelerate, it bogs and never catches up?
if i go WOT, wide open throttle it has full power up a hill after the bog?

these test , are the KEY tests.
this tells me what is wrong.
i hope the car is tuned up, if not , why no? the 60k mile done?

Jan 25, 2014 | 1988 Toyota Camry

1 Answer

My alarm kills my battery on 2005 camry


Throttle-by-wire systems like yours probably has means there is no physical linkage (cable or rod) interconnecting the accelerator pedal to the throttle body. Instead both talk to the computer via wires. The gas pedal is like a volume control on a radio and can never be felt "moving" when cruise control is engaged and making throttle adjustments such as going up or down a hill like older system did. A bad "sender" on the throttle pedal, bad or loose wiring to the computer, bad computer, bad wiring from computer to throttle body or intermittently bad electric actuator motor on/in the throttle body can all give the symptoms of "no throttle control" you describe. As for the battery being discharged, a bad trunk light switch could keep the trunk light on at all times but you cannot see this when the lid is closed. Immediately touching the trunk light bulb quickly after opening the trunk will tell you if it's staying on, it will be hot as heck. The same goes for the glove compartment light. A keyless entry system always uses power so it can listen for the signal from your keyfob to unlock the door, as does the time clock in dash or radio.

Jan 09, 2012 | 2003 Toyota Camry

2 Answers

Driver's airbag light on


go to workshop to reset and check , i think is a wire failure

Jul 30, 2010 | 2007 Toyota Camry

1 Answer

Loss of power during acceleration in 1989 toyota camry v6 with dash board indicating check light


The "check engine" warning light advises that the vehicle is in "fail safe" mode. That means only some of the car's capabilities are operational, just enough to get you to the nearest service point. You probably should not drive it any further than that. Have your service man download and analize the fault codes from the ECM which will indicate what the problem is.

Apr 09, 2010 | 1992 Toyota Camry V6

1 Answer

1992 Toyota Camry V6-Accelerator Pedal Sticks


problem two-try bleeding the radiator to make sure no air locks in it check if radiator fan is connected up and working

Mar 25, 2010 | 1992 Toyota Camry V6

1 Answer

Airbag light 1992 camry


There is a fault int eh airbag system on one of the sensors or the airbag itself. You need to have this checked by a mechanic as it is possible to trigger the airbag if the test is done incorrectly.

Oct 12, 2009 | 1992 Toyota Camry V6

1 Answer

1991 Toyota Camery Airbag light


try disconecting battery / if that does not work you will have to find out why it is staying on

Jan 23, 2009 | 1991 Toyota Camry

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...