Question about Nissan Minivan
Posted by Anonymous on
The Operators Manual will have instructions and it may be the time to read it as ALL ELSE HAS FAILED
Posted on May 03, 2015
Probly from inside tru nk or as we call it boot
Posted on May 03, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
No tools needed.
Beetles: Round plug inside trunk pops out.
Beetle Convts: Grille-looking rectangular panel pops out.
Reach in and you'll feel a large finger-grip able nut, back it off (DON'T DROP
IT) and place it somewhere retrievable. Take a small-flat-bladed screwdriver and wrap it in cloth so you don't scratch the paint. Poke said protected blade between the inside body joint and the tail light, gently pry tail light out. Remove offending bulb, replace with new. Installation is, as they say, the reverse of removal.
Posted on Jul 16, 2009
if the lite cover has no screws the access is in the boot pull back the boot/trunk carpet and you should see a cover over the tail lites access should be through there
Posted on Nov 21, 2008
your dimmer switch is the proublem it is loose or just worn they wear even if you dont ever use the switch a common nissian proublem iv had the same issue
Posted on May 02, 2010
The entire bed line will need to be removed. The long screws that hold the metal bracet where the bed extender attaches also hold the tail light assembly in place.
I pulled the bed liner up at a 45 degree angle and layed it on top of the cab. This revealed the screws. Take both screws out and lay to the side along with the metal bracket for the bed extender.
Now firmly grab the edges of the tail light assembly and pull...there are 2 hard rubber nipples that snap in to hold the assembly. You will feel like you might break it but you won't..just pull straight back hard. The assembly will "POP" out and then you can just twist the back of each bulb there are (3) and pull out..now you will see the bulbs..just pull the bad bulb straight out and push the new one into place. Now just reassemble. Total time will be 30-45 min. for this repair.
Posted on May 04, 2010
Tips for a great answer:
Nov 21, 2016 | Nissan Cars & Trucks
Jan 03, 2015 | 2005 Nissan Murano
Sep 05, 2011 | 1987 Nissan Pickup
Mar 28, 2011 | Nissan Pickup Cars & Trucks
Dec 31, 2009 | 1990 Nissan Pathfinder
Nov 15, 2009 | 2000 Nissan Maxima
Jun 21, 2009 | 2008 Nissan Sentra
Jan 10, 2009 | Nissan Altima Cars & Trucks
Jan 09, 2009 | 2004 Nissan Maxima
Aug 17, 2008 | 2004 Nissan Quest
Dec 12, 2017 | Nissan Cars & Trucks
807 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: