Question about 1995 Ford F350

1 Answer

I have a 1995 7.3liter, 4 door, 2 wheel drive, dually diesel - my problem is: It started cutting out - while doing so the rpms would drop. then it would act normal.. the new problem is.. im cruising down the road and it just dies..completley.. I have to turn the key off and wait to start. no code or lights came on. drove it home.. finally a check engine light came on and the abs light came on, but went away.. truck is too old to find out what codes, so pls help me troubleshoot.. thanxs

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 130 Answers

Its hard to tell exactly whats going on here because it could be all sorts of thngs but I have had 93 with a 7.3 for a long time. I had a similar problem and found my gas lines were sucking air somewhere in the lines between the two tanks and the injection pump. Air in the lines creates havoc for a diesel and this sound slike the same problem to me. Try switching over to the other tank and see if it still does it. I run mine on my front tank only because of this. I beleive there may have been a recall related to something like this for the two tank models. Its is switch or something. Mine woould run rough down the highway and if you had to slow down or stop it might die if you didnt keep the rpms up. If it did die, it took it forever to start up. Hope this helps.

Posted on Mar 27, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Do you have a fuse and relay guide for a dodge ram 3500 dually (5.9L cummings turbo diesel

look under the hood there should be a box with all the fuses it will be under that box, if not open the driver side door, and it will be on the side panel to the left of the steering wheel

Jan 11, 2016 | Dodge Cars & Trucks

1 Answer

F 450 won t start

does it have fuel pressure??is the auto shutoff (fuel cut off ) working..

Jan 05, 2014 | Ford Cars & Trucks

1 Answer


if you are trying to hook up your trailer lights, but there is no pigtail .most all trucks now have a harness behind the tag or rear bumper that will come apart and most parts stores sell a device that will go in between the two haves that makes easy work out of hooking the lights in. without cutting wires and the price is not that expensive

Sep 14, 2011 | Dodge Ram 3500 Cars & Trucks

1 Answer

Leaks gear 90 oil by the throw out bearing on my 1999 ford f350 2 wheel drive dually diesel

The only gear oil near the throw-out bearing would be in the transmission and the only way to the throw-out bearing is out the transmission front bearing retainer. I would check the vent first. It's on the transmission top. If that's free you'll have to remove the transmission and front bearing retainer to check the front bearing and seal.

May 07, 2011 | 1999 Ford F350 Regular Cab

1 Answer

I have a 1994 manual 4 door camry. it's running

look for vacuum leaks under the hood, or disconnected sensors, etc.

Do you have any engine codes on this vehicle?

Is it a 4 cyl. or 6 cyl. Toyota Camry?
What submodel (like LX, etc.)

Jul 13, 2010 | 1994 Toyota Camry

1 Answer

Serious understeer with 96 Dodge Ram 3500 Dually

Are the tie rod ends tight? Is the trac bar (frame end) tight? The steering boxes on these trucks require more input that a 1/2 ton truck or a car. How is the alignment? The caster on these should be set to about 5 degrees, the original specs allow a lot of wandering.

Apr 05, 2009 | 1996 Dodge Ram 3500 Club Cab

Not finding what you are looking for?
1995 Ford F350 Logo

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers


Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides