Question about 2001 GMC Jimmy

1 Answer

2001 jimmy with power windows. Drivers door window will not go down. Replaced switch, same problem, checked for 12v at the plug on the motor and it is OK. Is there a module for the auto down feature that could be faulty? where is it located?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

Replace the window motor, sometime window motor could be good but it is gear in side is bad aloud you not to let window up/down.

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Specifically I'm trying to identify the wire on the spark plug coil assembly to which I should connect the signal wire of a Tachometer to. The wire colours are, red, yellow, green/white, and blue.


It says the tachometer wire is Yellow/Green, you do not have that listed. You will find it in the list below, it is highlighted..

WIRING INFORMATION 2001 Subaru Legacy






WIREWIRE COLOR LOCATION

12V CONSTANT WIRE WHITE Ignition Harness

12V IGNITION WIRE GREEN Ignition Harness

12V ACCESSORY WIRE YELLOW Ignition Harness

STARTER WIRE WHITE/BLACK Ignition Harness

POWER DOOR LOCK (-) WHITE Harness In Driver's Kick Panel

POWER DOOR UNLOCK (-) GREEN/RED Harness In Driver's Kick Panel

PARKING LIGHTS (+) ORANGE At Light Switch

DOOR TRIGGER (-) PINK/BLACK In White Connector Behind Fuse Box

TRUNK TRIGGER (-) YELLOW/BLUE In White Connector Behind Fuse Box

TRUNK RELEASE (5-wire) LT.GREEN/YELLOW At Motor In Tail Gate

FACTORY ALARM ARM (-) Factory remote only

FACTORY ALARM DISARM (-) Factory remote only

TACHOMETER YELLOW/GREEN At Ignition Coil

BRAKE WIRE (+) WHITE/BLACK At Brake Pedal Switch

HORN TRIGGER (-) RED/GREEN Harness At Steering Column

LEFT FRONT WINDOW UP BLUE/RED At Driver Window Motor Inside Door

LEFT FRONT WINDOW DOWN BLUE At Driver Window Motor Inside Door

RIGHT FRONT WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door

RIGHT FRONT WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

LEFT REAR WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door

LEFT REAR WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

RIGHT REAR WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door
RIGHT REAR WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

Feb 07, 2016 | 2001 Subaru Legacy

1 Answer

How do i check the window switch jeep liberty?


Get yourself a test light and remove the switch from the door panel, you should have 12v going to one side of the switch and when you activate the switch power should be available at the other side. If you remove the door panel and access the wires going to the window motor, you should get power to the motor when you activate the switch. If you have power going to the motor and the motor doesn't run.....has top be a bad motor.

Aug 10, 2014 | 2002 Jeep Liberty

1 Answer

2001 Aztek windows buzz


Sounds like your drivers side window regulator motor gear is bad as far as the other windows drivers door switch is most likely bad if you dont have experience working on electrical or have never taken apart a door panel I would recommend seeing a mechanic. To check the switch you have to disassemble passenger door panel accesa the window regulator motor disconnect the weatherpack connect hook up multimeter and test for power while having an assistant push the window switch down

Apr 11, 2014 | 2005 Pontiac Aztec

2 Answers

My drivers side window will not roll up


pull the door card off and check for power to the regulator motor when switch is engaged-if there's 12v to the motor it needs to be replaced- cheers Denny

Dec 06, 2013 | Cars & Trucks

1 Answer

Remove and replace drivers side power window switch


I am assuming its the drivers door window you are speaking of....
The drivers door has the master window switch w/lockout. The entire assembly must be replaced. The individual switches on the drivers door can't be replaced by themselves. Some GM vehicles allow the panel with the switch assembly to be removed without removing the door panel. However, most require the door panel to be removed for access to the window switch assembly. The master door/window switch assembly is not cheap, by the way.
I would check/replace the window relay first. Usually located under the dash, or under one of the seats.
Might just be the window motor on the problem window.

Jul 08, 2013 | 2001 Cadillac Eldorado

1 Answer

2000 gmc jimmy drivers window doesn't work but all others work


With key on door open, hold switch in down position and rap door panel with rubber mallet...if it works, need motor, if not, check switch for power out to motor

Mar 01, 2013 | 2000 GMC Jimmy

4 Answers

Passenger side window stuck in down position


Volcompunker is on track.... if it is a stuck motor problem, before taking door apart, try this...it may work, works well on dodge caravans...

NO COST and fast PROCEDURE TO FIX IT:

1. Sit in vehicle, on seat next to problematic window
2. Ignition key is on
3. Door in question is opened (in case you closed it)
4. While door is open, press and hold power window button in desired window travel, keep button pressed !!
5. SLAM hard the door closed with one hand while other hand holds button as per #4.
6. Watch window operate as it should.

7. Repeat 3-6 if necessary, but usually the first try works!

Jul 11, 2010 | 2001 Ford Expedition

2 Answers

Power window switchs on 1996 gmc jimmy


Inspect or replace the window lock and unlock switch on the drivers door power window switch. There is a lock and unlock switch that will disable the switches to the other power window in the Jimmy. Check to make sure that switch is in the unlock position to have the other power window switch to work.
Thank you for suing fixya and good luck.

Apr 19, 2010 | 1996 GMC Jimmy

2 Answers

Drivers window in pontiac montana 2002 went down and will not come back up. how do i test to see if the switch is working. The right window is functioning very well.


Most likely the window motor/regulator assembly has gone bad.Check for good fuse, if good pull out the switch and make sure you have power to it, if you do then remove door panel and test for power at motor, if u have power but motor won't work replace. Suggest replacing the regulator assembly as well because the cables often fray and cause problems as well.

Mar 17, 2010 | 2002 Pontiac Montana

3 Answers

The drivers side window stoped working on my 2004 silverado the passenger side works fine


Try the fuse. The switch may be faulty so check by removing the inner door panel and connecting a 12v battery via two wires to the motor that winds the window up and down. If it goes up and down it's probably the switch which may just need a clean on the terminals.

Nov 01, 2009 | 2002 Chevrolet Silverado 2500HD

Not finding what you are looking for?
2001 GMC Jimmy Logo

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...