Question about Suzuki Vitara

Open Question

How to adjust theSuzuki Vitara G16b tappets - Vitara Suzuki Cars & Trucks

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 102 Answers

SOURCE: noisey tappets

Don't bother. They are hydraulic and rely on oil pressure to obtain a zero clearance when everything is OK. Your oil system may be sludgy or you may be using the incorrect viscosity oil.

Posted on Oct 07, 2009

  • 701 Answers

SOURCE: what are the tappet settings

Hello r murray: My name is Roger and I will help you. The correct adjustment for the 1.6 DOHC engine is as follows. Engine cold intake valve setting is (0.13-0.17mm) exhaust valve setting is (.23-0.27mm). Engine warmed up the valve settings are intake valves (0.17-0.21mm) exhaust valve settings are (0.28-0.32mm). Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Posted on Apr 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timming belt diagram


  • G16B (16valve is here)
http://www.fixkick.com/t-belt/16-fast-belt-install.html

note false timing marks on the cam cog wheel.
do not mess that up.

this page even has the FSM pages, to read. on G16B



Mar 06, 2015 | 1999 Suzuki Vitara

1 Answer

2003 Suzuki Vitara loud rattle noise after starting..goes away after driving about 1/4 mile


Hvae the hydraulic tappets check for rate of leak down as they may be worn to the point that they are taking a long time to adjust for the slack. I suspect this with the age of the vehicle and with and estimated milage in excess of 120.000 klms they would be fairly well worn

Feb 21, 2013 | Suzuki Cars & Trucks

1 Answer

Hi could some one tell me how to change the fuel pump and fuel filter on my 1991 Suzuki vitara it's the g16b engine need to fix ASAP thanks


Most cars today have the pump in the fuel tank so it will need to be droped to get the fuel pump in and out.As far as the filter if it has one in the tank it may not have another one. If it does you will find it when under the car doing the pump.Some are located on the fram rail.

Feb 16, 2013 | Cars & Trucks

1 Answer

Suzuki vitara g16b distributor check up 7 pins


if power going to distributor but not out either module or coil is bad. test wires to coil if no power module bad if power coil ck as engine is being turned over

Aug 05, 2012 | 1997 Suzuki Vitara

2 Answers

What are the tappet settings on a suzuki grand vitara 1.6 16v 2005 G16b head


Hello r murray: My name is Roger and I will help you. The correct adjustment for the 1.6 DOHC engine is as follows. Engine cold intake valve setting is (0.13-0.17mm) exhaust valve setting is (.23-0.27mm). Engine warmed up the valve settings are intake valves (0.17-0.21mm) exhaust valve settings are (0.28-0.32mm). Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Apr 06, 2011 | 1999 Suzuki Vitara

1 Answer

Whats the clearance of suzuki vitara engine tune-up: ___intake/ exhaust____?


VITARA G16A 88-94 Inlet (mm)0.13 - 0.17 Exhaust (mm)0.16 - 0.20

VITARA G16B 91-98 Inlet (mm)0.08 - 0.12 Exhaust (mm)0.08 - 0.12

VITARA J20A 97-98 Inlet (mm)0.08 - 0.12 Exhaust (mm)0.08 - 0.12

VITARA H20A - H25A N/A

Dec 08, 2010 | Suzuki Vitara Cars & Trucks

1 Answer

Noisey tappets


Don't bother. They are hydraulic and rely on oil pressure to obtain a zero clearance when everything is OK. Your oil system may be sludgy or you may be using the incorrect viscosity oil.

Oct 03, 2009 | 2000 Suzuki Grand Vitara

3 Answers

Tapping sound when Engine running


it sounds like your timing chain needs replacing. Better get it seem to quick in case of trouble if it breaks.

Apr 16, 2009 | 1999 Suzuki Grand Vitara

1 Answer

Can`t find tappet adjustment settings 4 a 1995 1.6 16v vitara


You will find they are hydraulic tappets hence no adjustment.

Apr 07, 2009 | Suzuki Vitara Cars & Trucks

1 Answer

Upgrade 413 to 416


These Motors were Labeled "Throw Away" for a Reason. They cannot be Bored out or BluePrinted. The Only way to Accomplish this is a New G16B Block. Some of the External Components on the Old one will Interchange Though.

Jan 22, 2009 | 1993 Suzuki Samurai

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...