Question about 2001 Dodge Durango
The contact has gone bad inside your starter cellaniod. you can get this fixed real cheap if you take yuor starter to a specialty starter/alternator shop, and i mean, the contact only costs $5.
Posted on Mar 26, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If the engine will not turn over using the starter then it cannot be the fuel pump. If the car has a factory inhibitor system installed, the chances are that it is this system that is preventing the car from starting. You may not have to press a button on the key fob either, it may have a transponder built into the key fob which transmits it's data at switch on.If you don't have the correct key or a key without a keyfob then the anti-theft system will NOT be disabled and the car will not start. There is no easy answer for this as you need the correct keyfob or you need to purchase and have programmed, the new keys.. If this is not the issue, let me know and I will describe further procedures for your issues..
Posted on Dec 07, 2009
SOURCE: 2004 A 8L won"t start
starter wont click because there's not enough "juice" to turn it over. this isnt because of the battery as you have just replaced it. it is due to a bad alternator recharging the battery as you drive. if it were only a fuse it would be the solenoid in the starter. but if it had started after you installed the battery then its not the solenoid. solution: buy a refurbished alternator and
Posted on Apr 24, 2009
Check your battery an eas way to know if its compleatly dead is to see if the lights come on or radio, you probley need a new alternater if the battery is dead again .
Posted on Jan 26, 2010
When the bushes in a starter get worn, it can cause the armature to rub on the magnetic poles (poleing) This can cause the starter turn slow or not at all
The sintered metal bushes are like bearings. Not to be confused with carbon brushes which are the electrical connectors.
When a starter clicks, it is the solenoid you can hear.supplying power through the brushes.
A starter that is poleing,often stops in a place where it isnt rubbing, and works fine the next start.
There can be other problems with a starter , perhaps one of the brushes is sticking, or the solenoid.
When it happens a tap with a hammer on the starter or solenoid, while a friend turns the key, is enough to get it working( this isnt a fix but might get you started in an emergency)
There is also the possibility of a loose or dirty cable connection, from when the new battery was installed
Posted on May 09, 2010
SOURCE: the car won't start; lights,
Check the starter and the starter relay or fuse. A client of mines car was doing the same thing, it ended up being two issues, the starter not working anymore, and a relay that was bad. If I am not mistaken everything should be labeled in the fuse box under the hood and will tell you where the fuse/ relay is for your vehicle
Posted on Jun 12, 2011
Tips for a great answer:
Aug 05, 2015 | 2003 Hyundai Santa Fe
Dec 21, 2012 | Cars & Trucks
Oct 09, 2012 | 2012 Volkswagen Jetta TDI Sedan 2.0L...
Jan 17, 2012 | 2004 Ford F250
Dec 28, 2011 | 2007 Chevrolet Tahoe
Jul 07, 2011 | 1995 Subaru Legacy
Jun 04, 2011 | 2006 Dodge Durango
Mar 27, 2011 | Mitsubishi Galant Cars & Trucks
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: