Question about 1992 Ford Probe

3 Answers

92 probe, problems keeping running.

I have a 92 Probe and about a month ago on way home from work it died, tried to get it going and could only move it a few feet, (Neutral rev and drop into gear.), once I had a friend tow it rest of way home, the most I can do is start it up then it dies. The only way I can get the engine to stay running is to lay on the gas. The moment I lift off the gas it dies.

If anyone knows a good solution feel free to share.

Posted by on

  • Crystal Atwood
    Crystal Atwood Aug 19, 2008

    I also have a 92 Probe and it did the same thing. I will tell you it wasn't the fuel pump or filter. Im looking for a diagram to the fuses under the hood. Can't find one of those either. Im checking on the Air intake or throttlebody, everything has a sensor or fuse.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Vary likely its the Altinator. Ask a mechanic but I really do think you should look into the Altinator there not to hard to get out of probes so it shouldnt be to sticky of a job either.

Posted on Sep 05, 2008

The diagram is on the inside of the fuse box cover in a 1993 probe maby your spark distributer where the sparkplug cabels come from the ignition i had it replaced when i couldn drive harden then 30 mp/h comment problem on the ford

Posted on Aug 22, 2008

Check your fuel pressure and your idle air control valve

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1993 ford probe that is starting and idling fine but when you give it gas it dies. what is the problem?


COULD BE STOPPED UP FUEL FILTER.SOUND LIKE YOU HAVE LEAN FUEL SYSTEM.WHEN YOU STEP ON ACCELERATOR ENGINE STALL OUT DUE TO LOW OR WEAK FUEL DEMAND.MORE YOU REP UP ENGINE IT NEEDS MORE FUEL.

Feb 23, 2011 | 1993 Ford Probe

1 Answer

My 1989 ford probe drives fine to about 50-55 km an hour , does not **** or die or anything stays running and will not go any faster , though the rpm go up. as well if i keep car in low gear there is no...


your trans is not shifting into over drive or your loclup is not working, try pulling codes from it or take it to a trans shop for a diagnostic, may get expensive good luck

Feb 03, 2011 | 1989 Ford Probe

2 Answers

I Have a 92 ford probe lx 3.0 v-6 5-speed and everytime i press on the clutch the pedal doesnt come back up any ideas why


hi, you may run out of fluid, find the clutch pump container and fill it up with brake fluid, if you see that is getting better then you have to bleede it out, hope it helps.

Dec 21, 2010 | 1992 Ford Probe

1 Answer

My 93 ford probe gt has a fuel problem, at work couple of guys says its the filter, it can b going down road and die, u can wear out starter trying to get it to start back up, then u let it sit and it will...


in the engine compartment between the firewall and the air filter and you need a 10 mm wrench and needle nose pliers and yes this definitely sounds like the problem it is clogged best of luck tomoro

Sep 14, 2010 | 1992 Ford Probe

1 Answer

MY 93 FORD PROBE AUTOMATIC NEEDS REVIVED!


Check or replace the fuel filter. You may need a full tune-up.

Jun 18, 2009 | 1993 Ford Probe

1 Answer

96 ford GT probe not starting


My 96 Probe GT had the same thing. I changed the fuel pump and thought i fixed the problem. Not so. I then changed the crankshaft position senser and that was my problem.

Jun 15, 2009 | 1996 Ford Probe

1 Answer

1992 ford probe lx


its probable a blown fuse have you checked those at all

Feb 07, 2009 | 1992 Ford Probe

2 Answers

1995 Ford Probe GT no spark


Hi is your Probe a 2.5cc 24valve.If it is then you may need to check the CPS(crank position sensor) All the best.Phil

Aug 17, 2008 | 1995 Ford Probe

Not finding what you are looking for?
1992 Ford Probe Logo

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

66219 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5363 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...