Question about Ford Expedition

1 Answer

Replace coil packs, my truck has no power its not fireing on all cylinders its missin bad what do yall thank it is

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 693 Answers

Might try new plugs, Could be your distrubtor cap, point's if it has them. good luck hope this helps.

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dead miss on one cylinder 99 sl2


A quick way to check the single coil pack if you know for sure which cylinder is miss firing and its setting a code you can swap the coil pack to another cylinder and see if the miss changes from one cylinder to another. If it travels to where you moved the coil then the coil is bad,if not you have other problems.

Mar 16, 2014 | Saturn Cars & Trucks

1 Answer

Would a 2001 chryler town and country faulty engine module cause number 2 cylinder not to fire


not likely, since the engine module also fire the plug across from the #2 cylinder on the coil pack. check for spark directly at the coil, if none is found ,then most likely a bad coil pack.

Jun 11, 2012 | 2002 Chrysler Town & Country

1 Answer

#4 ignition is not firing


I have a 1997 Rodeo with the 3.2L engine. When I experienced a similar problem, I took the coil pack off the #4 cylinder and exchanged it with the #2 cylinder. The misfire moved to the #2 cylinder which proved the coil pack was bad. I bought a replacement coil pack from a junk yard and corrected the problem.

Expect to pay over $150 for a brand new one if you also have to replace one.

Best regards,
Steve

May 24, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

MISFIRE ON CYLINDER 4 AND 6 WITH AN ENGINE LIGHT ON


Check the coil packs on the plug if equipped with that type, or the coil packs at the end of the spark plug wires, if so equipped.

Also, check that the fuel injectors are firing on all 8 cylinders.

Definitely, check out what other codes are stored in the computer besides a missing condition.

I have a 1999 Expedition that had a miss on a cylinder, and it turned out to be a bad coil pack. You have 2 cylinders missing, so I would check each cylinder for good spark, or replace the coil packs as necessary to see if that resolves the problem.

Good luck on this repair.

Dec 31, 2010 | 1997 Ford Expedition

2 Answers

Misfire in two cylinders


Check to see if the two cylinders misfiring are on the same coil pack. If so, change the coil pack in question.

This happened to me on 1997 Cadillac Deville Limousine.

Also, check for a blown head gasket with compression test.

Jul 04, 2010 | 2001 Oldsmobile Aurora

1 Answer

Does coil pack in cylinder four fire plug in cylinder one


no, if you have a coil pack, and one cylinder is not firing then you will need to relace coil pack, if you have individual coils (coil over plug) the you can just replace the coil associated with that cylinder.

Nov 10, 2009 | Kia Optima Cars & Trucks

1 Answer

Low horse power.engine missing


Give it a tune up, change all the spark plugs, the plug wires, even the coil pack or packs. If that doesn't work you'll need to perform a compression test on all of the cylinders and see if you have a cylinder that isn't building up proper compression. If my memory serves me, that engine is a Distributorless system that uses three coil packs to fire off the 6 cylinders. One bad coil can kill two cylinders. I had an ex GF that had the same issue.

Jul 13, 2009 | 1992 Buick LeSabre

1 Answer

Ignition coils not getting juice...


are u asking y it doesnt get 12 volts input or are u asking y it doesnt fire? if it is receiving voltage, but not firing,then u need to replace the coil pack,if it is not getting voltage to the coil,then if it is pluged into a module the module is bad and u need o replace module and coil pack

Jun 30, 2009 | 1991 Nissan 300ZX

1 Answer

Engine starts missin


I would get this in and have a power balance test performed to see which cylinder/s are missing. Most likely a bad ignition coil, wire or spark plug depending on which motor you have.

Jan 05, 2009 | 2002 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...