Question about 1994 Chevrolet Corsica

1 Answer

I,m putting in a new sterio and I need to know the location of the colored wires on the radio harness. Where each color goes to

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,975 Answers

Here you go. I hope this helps you and good luck...

1994-97 Chevrolet Corsica Stereo Wiring Constant 12V+ Orange Switched 12V+ Yellow Ground Black Illumination Gray Dimmer Brown Antenna Trigger Pink Antenna Right Front Front Speakers 4" x 6" Kick Panels Left Front (+) Tan Left Front (-) Gray Right Front (+) Light Green Right Front (-) Dark Green Rear Speakers 6" x 9" Rear Deck Left Rear (+) Brown Left Rear (-) Yellow Right Rear (+) Dark Blue Right Rear (-) Light Blue

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Delco radio wiring diagram 89 cutlass supreme


I can supply the wire colors of the radio harness.

Mar 17, 2014 | Cars & Trucks

2 Answers

Does any radio work for a 1986 camry?


As in aftermarket like a Sony or Kenwood or..???? Yes.
The easiest way to install one is to get an installation kit. One that has a bracket/face that fills the hole in the dash and the new radio sits in and a wire harness. The harness makes things so simple. You don't need to know what wire color is what. The cars factory harness plugs right in and the new radio wires will be the same color on the harness.

Sep 06, 2011 | 1986 Toyota Camry

1 Answer

All i want to know is what each wire does and for how i would install a radio.


when installing an aftermarket radio, you will have a wiring harness with the new radio. you will have to buy seperate an adapter harness for the vehicle you are putting the new radio in. these wires are usually labled. Just match the colors with colors. watch for solid colors and the wires with stripes on them. The solid ones are positive and the one with stripes are grounds. Its pretty self explanitory once you start doing it

Sep 14, 2010 | 1986 Ford F 250

2 Answers

Wiring diagram or color chart for a 96 ford mustang radio harness


dont even worrie about it just go to walmart or an auto parts and get a wiring harness they are not so expensive

May 28, 2009 | 1996 Ford Mustang

1 Answer

Need wiring color codes to install a new radio


the easiest way to install a new radio is to get the wiring harness adapter for your vehicle it runs about $25 and then you do not have to cut the factory harness. the wiring codes will come with the new harness and is just matching up there color code to the new stereos color code.

May 21, 2009 | 1994 Lincoln Town Car

1 Answer

Sterio wireing


you will need to get a cord that connects to the sterio and then you need to match them up with these wires
the colors for the radio that are hooked up to the car are
  • orange is power
  • red is egnition
  • blue is power antena
  • black is ground
other ones will most likely be the sterio wires you just need to find colors that look a like and they will most likely match

hope this helps

Apr 07, 2009 | 2000 Ford Focus

1 Answer

Audio wiring problem


Radio Constant 12V+ Wire: White/Green
Radio Switched 12V+ Wire: White/Red
Radio Ground Wire: Black
Radio Illumination Wire: n/a
Radio Dimmer Wire: Red/Black
Radio Antenna Trigger Wire: n/a
Radio Antenna Location: Rear Glass
Front Speakers Size and Location: 6 1/2′ Doors
Left Front Speaker Wire (+): Blue/Green
Left Front Speaker Wire (-): Gray/Black
Right Front Speaker Wire (+): Red/Green
Right Front Speaker Wire (-): Brown/Black
Rear Speakers Size and Location: 6′ x 9′ Rear Deck
Left Rear Speaker Wire (+): Blue/Yellow
Left Rear Speaker Wire (-): Gray/White
Right Rear Speaker Wire (+): Red/Yellow

Apr 05, 2009 | 1998 Honda Accord

2 Answers

Replace factory radio on 2002 yukon xl


all you gotta do is carfully pry the dash panel off (prying from the far left end is easiest) completely remove panel. then there are 2 clips that hold the factory sterio in place. push on the both clips while pulling the radio out. simply disconnect the wiring harness from the back of the radio. using an adapter avaliable at your local radio shop (scosche p/n gm02, mdarb and gm1483b) wiring harness, dash install kit, and antenna adapter. then simply match the colors on the new radio's harness to the adapter harness, crimping each connection with a "but plug". then simply follow the instructions included with the dash install kit to assemble the kit.connect the antenna adapter to radio, plug in all cables. test to see if everything works properly before the final install. install sterio into dash install kit, re installing kit where origional radio was. then simply put the panel back in its place by firmly pushing on it untill it snaps into place. then enjoy your new radio!

Dec 29, 2008 | 2002 GMC Yukon XL

2 Answers

97 caldina


you can get something called a wiring harness from Walmart (or any place that sells car audio equipment). you plug it into the factory connection that would normally go to the back of the radio, and it has the wires labeled and color coded with what goes where. most times all you would need to do is match up the colors from the harness to the new radio you're trying to install. it makes it really easy to install after market radios, which im assuming you're trying to do.

Sep 06, 2008 | 1997 Toyota Corolla

2 Answers

I am installing an after market stereo deck into a 2004 Chevy Cavalier but I am not getting any power. From my research I need to hook the deck up to the vehicles ignition harness but I do not know where...


ok now this is fun i had a good ole time putting my after market raidio in on my 04 with out the $300 harness that the sterio shops wanna charge a arm and a leg to install you need to run your 12v power source to the igniton fuse its farly simple if you need picture diagrams i can deffianatly post some pictures showing you exactly how to wire it up bc trust me i was mad enuff trying to get my stereo in so i wouldnt mind helping some one else out on getting it installed bc its frustrating not knowing how to do it

Jul 19, 2008 | 2004 Chevrolet Cavalier

Not finding what you are looking for?
1994 Chevrolet Corsica Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...