Question about 2001 Pontiac Bonneville

Open Question

How to replace fog lights on a 2001 Pontiac Bonneville?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Molson02536
  • 3854 Answers

SOURCE: I have 2001 Pontiac Bonneville My heat works but

Your passenger side temperature door actuator is bad. You can access the actuator by removing the glove box & hush panel. The actuator is on the side of the HVAC box. If you can gain access to the actuator watch the center of the actuator as you change the temp on the control head, if the actuator does not move it is bad, if it does, the door inside the HVAC box is bad. Most likely its the actuator. If you remove the actuator & open it up you will most likely find the large center plastic gear is cracked all the way through. It is held in place by 2 or 3 7/32 screws. Once you replace it, disconnect your battery wait 30 seconds and reconnect it to reset the HVAC control head so it can relearn your actuator positions. It can take up to 5 minutes for the control head to go through it's relearn procedure. You can try resetting the actuator first , but make sure your radio is turned off before you disconnect the battery and if your luck, the actuator may not have any broken parts and the gears may just need to be freed up and lubed. Good luck friend and hope this helps.

Posted on Oct 22, 2009

  • 15 Answers

SOURCE: 2001 pontiac cowl pack not fireing.

Here is a diagram of the firing order for you 3800 engine. Cylinders 1 and 4 are misfiring because the operate under the same "Coil Pack" and the coil pack has unfortunately gone bad. O'Reilly sells them for between $30-50 depending on the amount of warranty coverage you want. To replace, simply unscrew the screws that hold the coil pack in place. WAIT before unplugging the plug wires. Place the old coil pack and new coil pack next to each other, unplug one plug wire, then plug it to that same port on the new coil pack. then do the same for the other plug wire. Then screw your new coil pack in place, and start you car. should run fine!

3098a58.jpg

Posted on Dec 14, 2009

  • 30 Answers

SOURCE: replace horn fuse in fuse panel of 1992 pontiac bonneville

Your fuse box is located on the driver side under the dash board. Up above where your brake and gas pedal are located. There should be a plastic cover that can be snapped off to reveal all of your fuses and on the inside of this plastic cover there should be a diagram of the fuses that are in use.

Posted on Feb 16, 2010

  • 8 Answers

SOURCE: service engine soon light has been on for two

Hi,read your car service manual,it will show you how to reset service engine light.
good luck!!!!!!!

Posted on Feb 24, 2010

  • 1 Answer

SOURCE: Serpentine belt diagram for a 2001 Pontiac Bonneville SSEI

these motors have two carrier pulleys and oone tensioner. lookinjg at the motor from the rightside of car the belt goes as follaws: crank pully to super charger from the left. the right side goes up to the lower carrier which will have the flat of the belt riding on it. from there the belt routes to the upper carrier
[ loop it over so the grooves ride
] and then under the tensioner any questions contact goldenvegasart@gmail.com

Posted on Aug 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 97 Pontiac Bonneville and. The cluster light are not working also how do you turn on the fog lamps


if your clluster lights are not working check the fuse labeled clus. or cluster. fog lights should be on a switch on the dash.

Mar 03, 2016 | Pontiac Cars & Trucks

1 Answer

I have a 2001 Pontiac Bonneville I replaced bad hubs what do I have to do to get trac off antilock and brake lights to go off


check to make sure you reconnected the ABS connector to the hub bearing connector and inspect for damage to the plug or wiring.

Apr 24, 2015 | 2001 Pontiac Bonneville

1 Answer

I HAVE a1997 Pontiac Bonneville the dash and foglights do'nt work and i know the fuss is good


You can check for power where it goes into the fog light switch and then the output terminal when the switch is on, or simply skip that step and turn the switch on and test for power at the fog lamp connectors if you have no power go back and check the switch if you do have power make sure the fog lamp housings are properly grounded and then test with a new bulb

Mar 04, 2011 | 1997 Pontiac Bonneville

1 Answer

How to change a fog light bulb for a 2003 pontiac bonneville


on the back side of the light turn it counter clockwise bulb will come out unplug and reverse the steps

Feb 21, 2011 | Pontiac Bonneville Cars & Trucks

1 Answer

How do you change the bulb on the fog lamp for a 2003 Pontiac Bonneville?


you have to get under the car if you turn the light fixture from the back of the light it should come right out and go right back in

Jul 24, 2010 | 2003 Pontiac Bonneville

1 Answer

How do you change the light in the shift console of a 2001 Pontiac Bonneville?


well you will have to remove the center console cover and the shifter handle. the handle has a pin that you will have to puul out of the neck of the handle once you have removed everything there will be a socket in the display. a 194 bulb will replace the light. now reverse the procedure.

Aug 24, 2009 | 2001 Pontiac Bonneville

1 Answer

2000 bonneville


Could be both the bulbs are burnt out so replace the bulbs if bulbs are good check fuses if fuses are good the check the wiring.

Jul 08, 2009 | 2000 Pontiac Bonneville

1 Answer

Burned out fog light


You have to remove the plastic cover that is connected to the spoiler. It is the width of the car. After you remove it you can access the fog light. Hope this helps you.

Jan 07, 2009 | 2000 Pontiac Bonneville

Not finding what you are looking for?
2001 Pontiac Bonneville Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...