Question about 2004 Jeep Wrangler

2 Answers

2004 JEEP WRANGLER TURN SIGNAL

TURN SIGNAL IS GOING LIKE CRAZY WHEN IT IS TURNED ON REPLACED THE BULB BUT THAT DIDNT HELP WONDERING IF IT IS A FUSE


THANKS
ANDREW

Posted by on

  • Anonymous Mar 24, 2014

    jeep wrangler turn signal

×

2 Answers

I had this problem with my '04 Wrangler -- turned out to be poorly grounded

Posted on Sep 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Replace all bulbs on that side,or check for broken ground wires.

Posted on Aug 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to repair left turn signal and brake light, changed bulb, No voltage in fuse box, fuse is ok


No voltage. Replace the turn signal switch. All the exterior lights run threw it. Except the rear high brake light.

Apr 08, 2015 | 2013 Jeep Wrangler

1 Answer

Hi, I have a 2002 Jeep Wrangler Sport. The turn signals just sopped working. Have replaced the flasher and the turn signal switch and still no blinkers. Checked fuses they are fine also. What else...


I assume you must have also checked the rear turn signal bulbs.
You may have to start using a volt meter. Check for 12 v at the bulbs also check the bulb ground...that's a common cause of light problems.

Jun 26, 2011 | 2002 Jeep Wrangler

1 Answer

I have a 89 jeep wrangler and the rear passenger side turn light, break light, or tail light will not work. It was working and still is on the front. I have checked bulb and fuse and I cant find. Its like...


Like any bulb, it needspower and ground. Probe the contact in the bulb socket with a test light and check for power. If you have power, use the same ground you did for the test light and connect a short piece of wire there and probe the socket with the bulb installed (insert down into the socket between the bulb and socket) If the light comes on re-ground the socket.
If you get nothing for power check the harness closer to the switch...if nothing there you may need to check the signal switch to make sure an internal contact hasn't failed. I'm betting it's a bad ground though.

Oct 05, 2009 | 1989 Jeep Wrangler

1 Answer

Left rear turn signal and brake light dont work


You have a broken wire to the turn/brake light portion of the light as they use the same wire. Or where the plug goes into the light assy could be bad. Torsion mount lights are horrible and you should think about replacing with a universal light that you can wire direct.

Feb 17, 2009 | 1997 Jeep Wrangler

1 Answer

Jeep Liberty Left Rear Turn Signal Not Working


sounds like the bulb you have is the wrong resistance the new noen bulbs will do this

Nov 16, 2008 | 2004 Jeep Wrangler

Not finding what you are looking for?
2004 Jeep Wrangler Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...