Question about 1984 Toyota Camry

1 Answer

Have an 84 toyota camry and break and reverse lights do not work. Was told it was the Harness under the dash. How do I find out if that is it and if so replace it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 22,156 Answers

I do feel you have got the wrong end of the stick here ,brake light switch is under the dash on the pedal and the reversing light switch is on the gearbox ,so change the switches or test them before you go pulling the dash out to change the loom ,if it is the loom then its a easy job to just rewire these two items but i think its just the switches and you have interpretated the information incorrectly

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why don't back-up lights work?


Wire harness in trunk. : Toyota Camry Common Electrical ...

repairpal.com > Problems > Toyota > Camry
Ground wire coonection for tail light Camry 1999. All the lights ( license plate, tail,reverse) that are connected to the trunk are not working.... 1999 Toyota Camry.
images for toyota camry backup lights not working

Oct 14, 2015 | Toyota Camry Cars & Trucks

1 Answer

91 camry dash lights indicate break , light& battery problem car dies new battery lights still indicate same problems. Breacks work fine


Lamp failure sensor it sit in thetrunk next or the hinge
the harness falls down and gets stuck and short out the
wire harness repair harness replace little yellow box
it start with 89373 ,make sure you have the the right
sensor easy to locate please reply let me know if
that helps thank you

Apr 19, 2015 | 1991 Toyota Camry

1 Answer

Power windows and door locks do not work, At first they intermittently stopped working and now they don't work at all. The fuses appear to be okay. Could the circuit breaker be faulty? How do I change...


this generation Camry has a known issue with the harness that goes through the driver side door (from under the dash to the door) getting damaged over years of door opening/closing-I went thought this recently and found many broken wires in that harness, you need to remove the door panel and check the wiring in the sheath for breaks-some are hard to find as the insulation may still be intact, I did price that harness at a local toyota dealership and it is $115, so I ended up using a digital meter set to continuity to find the breaks, and I spliced and sodered the damaged wires. ime consuming, but it worked.

Jun 07, 2011 | 1989 Toyota Camry

1 Answer

1996 toyota camry power windows won't go down. checked the 30 amp pink switch under the dash and it's good. pulled the main switch from the drivers door and no obvious issues with the circuit board. the...


the wire harness that runs from the door to the car from opening and closing the door ive seen the wires break try to move them first while working the switch sometimes it will start to work

Feb 28, 2010 | 1991 Toyota Camry

1 Answer

1991 Toyota Camry, tail lights and dash lights don't work


Have you looked under the hood? There are more fuses under the hood. Is your dimmer turned down on your dash lights?

Jan 25, 2010 | 1991 Toyota Camry

1 Answer

My brake lights wont come on..ive changed the bulbs and they still dont work...i cant find the brake light FUSE... 1993 TOYOTA CAMRY


Break light fuse would be in your main fuse panel, most likely under the dash somewhere on the drivers side. A "key" of sorts may be on a sticker near the panel or molded into the plastic cover. If not a key should also be in the vehicle manual as to what fuse is what. Next thing is the break light switch attached somewhere under the dash to the break peddal might be faulty. This is most likely a plunging kind of switch that activates the break lights as the pedal is being pressed. Good luck!

Nov 01, 2009 | 1993 Toyota Camry V6

3 Answers

The brake light do not work on my 1989 Toyota Camry. The fuses are fine and the bulbs are good. Any Suggestions? Thank you


Very common problem in Camry's.The wiring harness to the trunk running down the driver side hinge become pinched and or flexed so much they break.

Sep 17, 2009 | 1989 Toyota Camry

2 Answers

2000 toyota camry check engine light. trac light on. when i step on breaks reverse square indicator on dash board goes on. No reverse lights and rear light indicator on.


wires are pinched and shorting together near the left (drivers side) trunk hinge. brake light power is feeding back through the reverse light wiring. this will also turn on the check engine light with a neutral safety switch malfunction code as the computer also sees this voltage in the reverse light circuit. Find and repair the wiring, pull the EFI fuse in the panel under the hood to clear the code. Hope this helps

Dec 27, 2008 | 1999 Toyota Camry

2 Answers

1994 camry reverse indicator ilght on when breaking


Hello! May I suggest possibly a bad earth? can you try standing at the rear of the vehicle with ignition on ask your wife to apply the brakes, do any other lights glimmer? failing this with brakes still applied pop into reverse and see if any lights glimmer or come on? try again with left or right indicator's flashing and brakes applied, is there an irratic signal or are the reverse lights blinking too?
If any of the above take the bulb holders out of the rear lenses look for corrosion, bad contacts, broken filiaments and security. Clean and replace then see what happens.
Just a thought?
Hope this works? Good Luck!
Paul 'W'
Onyer~EDSon(:0)~[><

Dec 10, 2008 | 1994 Toyota Camry

1 Answer

1988 camry rear lights.


Look at the wiring harness that runs along the hinge on the trunk lid, driver side. Camrys with lights on the trunk lid are know to break one of these wires.

Sep 26, 2008 | 1988 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...