Question about 2003 Mazda Mazda6

1 Answer

Hi, I'm just looking for the torque specs for the front brake rotors on my 2003 Mazda 6. Oh, also, it would be good to know the torque on the lug nuts. Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

Front brake rotor retaining screw 85-130 inch LBS......lug nuts 67-85 ft. LBS.....front caliper guide bolt

Posted on Mar 26, 2011

  • john nail
    john nail Mar 26, 2011

    front caliper guide bolt 28-36 ft.LBS.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs for 2003 saturn veu 3.0


2003 Vue Torque Specs? - SaturnFans.com Forums

www.saturnfans.com > ... > Models > Saturn Vue > Vue Tech

Feb 4, 2009 - 6 posts - ‎5 authors
Does anyone have/know where I can get the torque specs for a Saturn Vue? ... See attached for 2003 2.2 and 3.0 engine torque and front ... need vue torque specs
9 posts
Oct 13, 2010
Filter cap and drain plug torque spec
14 posts
Feb 19, 2009
Lug Nut Torque?
5 posts
Oct 6, 2008
S-Series Torque Specifications
15 posts
Nov 13, 2004
More results from www.saturnfans.com

Nov 26, 2015 | Saturn Cars & Trucks

1 Answer

What is the torque specs for brake calipers on a ford explorer sport front calipers


  1. Torque Specs For F250 Caliper Bolts - Diesel Forum - TheDieselStop.com

    www.thedieselstop.com > ... > 1999-2007 General Questions Jan 13, 2009 - 3 posts - ‎1 author
    Does any one know what the caliper bolts torque specs are? ... Disc brake caliper pin bolts - Excursion, F-250/F-350 with Ford and Dana axle ... Torque specs for front brakes
    5 posts
    Mar 12, 2009
    05 F250 brake torque specs please
    6 posts
    Aug 22, 2007
    Brake caliper torque specs
    5 posts
    Jul 14, 2007
    Front brake Caliper Bolt Torque
    6 posts
    Apr 25, 2005
    More results from www.thedieselstop.com

Jul 11, 2015 | 1998 Ford Explorer

1 Answer

How to replace front brake pads on a How to replace front brake pads on a 2000 Chevy S10 4WD pickup?


First you want to remove brake fluid from brake resovoir, raise front wheels off ground and set park brake or block rear wheels. Remove front wheels, keep steering wheel unlocked so you can turn rotors side to side. Loosen bolts that hold caliper end gently pry caliper free from rotor, remove caliper and remove pads, use bungy cord to hang caliper away from rotor, have rotors measured to see if they are thick enough to have machined, replace if out of specs. Match up pads with old ones, use anti- squeak red liquid and put layer on back of pads, let dry. Use tool to put pistons back into calipers, slowly put pistons back into bore while opening up bleeder screw so ABS won't be damaged. After rotors resurfaced, wash with rubbing alchohal to remove any oils from hands, install rotors and reverse putting pads back onto caliper and reinstall, torque caliper bolts to factory specs and tighten bleeder screws. Install wheels, torque lug nuts to factory specs and replace brake fluid in resovoir. Lower car carefully to ground and press brake peddle without pumping it. Any air in system should bleed out, if not get someone to help with bleeding system. Road test to ensure no squeaks or pulling, burn brakes in slowly.

May 10, 2014 | 2007 Saturn Aura XR Sedan

1 Answer

What are mazda 6 wheel bearing torque specification


What is the front axle torque on a 2004 Mazda 6

Mar 17, 2012 | 2004 Mazda 6

2 Answers

What would make the car pulsate when breaking while the brakes and rotors appear good.


Normally this is caused by uneven rotors or drums, replacing brakes and not resurfacing drums

or rotors, or replacing drums or rotors, old brake fluid in system, not flushing out lines, dirty

brake fluid causing brake calipers to hang-up. inproperly installed brakes, not torqueing down

the bolts, loose bolts. good luck!

Jun 25, 2011 | 1999 Oldsmobile Aurora

2 Answers

07 camry brakes clatters when brakes apply, Can you help with the fix??


If you are saying the brakes chatter or there is a vibration when applying the brakes your rotors are warped. Remove the pads, have the rotors turned at a machine shop, and replace the pads with new ones, even if they look good. Warped rotors are caused by excessive braking at high speed, riding the brake pedal, or not correctly torquing the lug nuts to the correct lb/ft when installing the tire/wheel. Your owner's manual will list the correct torque which will be around 80 lb/ft. Make sure anyone removing a wheel use a torque wrench and torque them correctly.

Jun 12, 2010 | 2007 Toyota Camry

1 Answer

I need instructions on how to remove the rotors and replace the front brake pads on a 2004 mazda 6.


Instructions Things You'll Need:
  • Floor jack
  • Jack stand(s)
  • Wheel chock
  • Turkey baster
  • DOT 3 brake fluid
  • Flathead screwdriver
  • 1/2-inch drive breaking bar
  • 1/2-inch drive socket set (up to 21 mm)
  • 1/2-inch drive ratchet
  • 1/2-inch drive adjustable torque wrench (recommended)
  • Impact screwdriver with Phillips head bit
  • Hammer
  • Bungee cord
  • C-clamp
  • Brake clean spray
  • Shop rag(s)
    How to Replace Front Rotors on a Mazda6
  1. Step 1 Park the Mazda6 on a flat paved surface. Apply the parking brake and release the hood latch. Place a wheel chock behind one of the rear tires and open the hood. **** out half the fluid from the master cylinder reservoir using the turkey baster and discard. Replace the master cylinder cap securely.
  2. Step 2 Break the lug nuts loose on the front tire, using the breaking bar and a 21-mm socket. Raise the left quarter panel first with the floor jack and place the jack stand under the left front frame rail. You can lift the right side too or just do one side at a time. Remove the lug nuts and the wheel when elevated.
  3. Step 3 Pry the two plastic caliper slide bolt covers off with the flathead screwdriver and remove the caliper slide bolts with the ratchet and a socket. Pry the caliper off the pads and rotor with the screwdriver and support it to the coil spring with the bungee cord so it does not dangle by the brake hose. Compress the piston of the caliper inward using the C-clamp until the piston bottoms out in the caliper casing.
  4. Step 4 Remove the pads from the caliper anchor by prying them out gently with the screwdriver. Be sure to memorize how they were positioned in the anchor so you can replace them the same way in the event you're not replacing the pads as well. Remove the caliper anchor bolts using the ratchet and a socket. They're going to be extremely tight, so be prepared. Remove the caliper anchor.
  5. Step 5 Locate the retaining screw on the hub face of the rotor. Use the impact screwdriver in the reverse position with a Phillips head bit and strike the end of the screwdriver with the hammer. Remove the screw. Remove the rotor. If it is stubbornly stuck to the hub, strike it a few times with force on the plated fins of the rotor.
  6. Step 6 Spray the new rotor with brake clean and be generous to clean off the oil coating that new rotors have on them so they will not rust from condensation in the air while they were in storage. Clean both sides and wipe dry with a shop rag. Place the new rotor on the hub and make sure to line up the retaining screw hole in the rotor to the hub. Replace and tighten the retaining screw.
  7. Step 7 Replace the caliper anchor and bolts and tighten tightly. Replace the pads into the caliper anchor in the same manner you removed them. Replace the caliper over the pads and rotor and replace and tighten the caliper slide bolts. Replace the plastic covers.
  8. Step 8 Replace the wheel and lug nuts and tighten the lug nuts so they are flush. Lower the Mazda6 and torque the lug nuts alternately with the torque wrench, set at 80 foot-pounds and the 21-mm socket. If you raised both sides of the front axle, wait until you've replaced the right side rotor, otherwise repeat Step 2 through Step 8 for the right side.
  9. Step 9 Pump the foot brake pedal until it feels normal to restore the hydraulic pressure back to the compressed caliper pistons. Release the parking brake.
  10. Step 10 Check and add new DOT 3 brake fluid to the master cylinder and replace the cap securely. Close the hood. Remove the wheel chock and test drive

May 28, 2010 | 2004 Mazda 6

1 Answer

2003 mazda 6 3.0 need the main bearing torque specs


I'm sending you the torque specifications for your main bearings and also your head bolts. I also sent you main bearing and cylinder head tightening sequence. I hope this will be useful2c713bf.giffce6623.gif
Main Bearings Torque specs. 40-43 Ft. Lbs.
Cylinder Head Torque specs. 56-60 Ft. Lbs.

Oct 05, 2009 | 2003 Mazda Mazda6

2 Answers

Left front tire shakes when applying brakes.


Exact same thing happened to me. On my 03 taurus and 03 Windstar. It ended up be worn inner tie rod ends. Would reccommend an inspection of bushings, tie rods etc.

May 11, 2009 | 2003 Ford Taurus

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
2003 Mazda Mazda6 Logo

581 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...