Question about 1992 Chevrolet Lumina

1 Answer

96 chevy lumina sedan

My turn signal does not work at all after i bought a new flasher from the dealer. hazard light working on both tail light and the left front signal is working but the right is not working i check the bulb they are ok not sure why i don't have a turn signal at all pls help

Posted by on

  • Anonymous Sep 06, 2008

    1992 z 24 cavalier hazard lights work but not the signal lights

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

For both issues, could possibly be the flasher unit for the blinkers.....which could be separate from the hazard flasher unit...(happened on my 92 chevy lumina) or the actual turn signal switch which is located in the steering column....not the stick you push, but the part inside that the lever controls (also happened on my lumina............3 times)

TIP:

start by checking the flasher....its cheap maybe 3-4$ for a new unit.....if thats not it and you figure out its the switch, go to a junkyard.....its wayyyy cheaper

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have tail lights,brake lights,and hazard flashers but no turn signals even though replaced switch and checked fuses


The turn signal flasher and hazard flasher are different parts.
The turn signal flasher can be hard to find and not always available from a parts store. On some models it is a dealer part.

Aug 23, 2012 | 1993 Ford Thunderbird

1 Answer

1997 Chevy Lumina turn signals are not working. I checked the fuses and bulbs they are fine. Hazard lights are working. What could be wrong?


I suggtes check and replace the Flasher, this edvice is located below left hand side of the instrument panel.

Hope helps.

Jun 23, 2011 | 1997 Chevrolet Lumina

1 Answer

The turn signals dont work on my 92 chevy lumina but the hazard lights work fine


hi this sounds like the flasher box for the turn signals my be u/s they run on a separate box to the hazards, i think you will find this in your fuse box it should be one of the relays in there, also have you checked the fuse for it as well? hope this helps

Aug 02, 2010 | 1992 Chevrolet Lumina

1 Answer

When the blinker is flipped up or down on the column the tail lights dont respond. But the brake lights and the hazards still work fine. Whats the problem?


The turn signal flasher relay may have a problem.Turn on the hazards and follow the clicking sound to the source and usually the hazard flasher and turn signal flasher are very close to each other.Remove the one that is clicking and put it in place of the turn signal flasher.If the Turn signals then work you will need to purchase a new turn signal flasher relay.They are usually just a few dollars.

Jul 29, 2010 | 1986 Ford F 250

1 Answer

I cannot locate the fuse box on my 1994 chevy lumina, the my signal lights are not working


A fuse panel is in the glove compartment; remember that turn signal and hazard signals work with Flashers: the turn signal flasher is mounted in a clip on the right side of the steering column support bracket. The hazard flasher is located in the component center, under the instrument panel, on the right side.

Replace the flasher by unplugging the old one and plugging in the new one.

Hope this help (remember comment and rated this).

Apr 10, 2010 | 1994 Chevrolet Lumina

1 Answer

1996 Lumina Sedan Turn Signals don't work


do you hazard warning lights work? firstly id check the fuses, check to see if the indicator fuse has blown, if not that then when you put the indicator on does it make the ticking sound it should? if not then your problem will be the flasher unit, the flasher unit is either a three or four pin relay located usually near your fuse box. if the flasher unit is ticking then it should be working correctly. if the worst comes to the worst then it would be a faulty stalk, but hopefully not.

Jan 13, 2010 | 1995 Chevrolet Lumina

1 Answer

I have a 92 lumina. The turn signals dont work.


The hazard lights has it's own flasher, change the flasher for the turn signals and see if that works. To find out which flasher it is, put on the hazard lights, and put your finger on the flashers, which ever one you don't feel clicking is the turn signal one.

Nov 14, 2009 | 1992 Chevrolet Lumina

1 Answer

Turn signals and brake lights won't work on my


try replacing the flasher first. and check the two fuses for hazards and signals.

Sep 19, 2009 | 1989 Chevrolet C1500

2 Answers

Signals don't work at all!


bulbs are all good ? the switch in steering wheel do the hazards work can you hear the flasher relay blinking ground wires all good

Jul 07, 2009 | 1992 Chevrolet Lumina

Not finding what you are looking for?
1992 Chevrolet Lumina Logo

670 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...