Question about Suzuki Vitara

1 Answer

When you open the oil filler cap while the engine is in idle the engine starts to lose its idle and then would stop. If you close the oil filler cap the idle of the car is normal. No smoke is emitting at the tailpipe.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,489 Answers

This is normal. With oil filler cap off, the vacuum pressure in the engine is lowered.

Charlie

Posted on Mar 26, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the engine stall when I remove then replace the oil filler cap


Normal, maybe. Since they started putting the engine case vacuum in the air filter plenum. Yes it happens. Many different cars today will shut down soon if the oil cap is not on. It has to do with the Mass air flow sensor.

May 08, 2016 | 2006 Seat Ibiza 1.2

2 Answers

Cant find the valve to let air pressure from my radiator for my water to flow right


FILL COOLANT SYSTEM UP BY POURING COOLANT IN THE EXPANSION TANK UNTIL COOLANT LEVEL STOP DROPPING IN THE EXPANSION.WHEN YOU POUR COOLANT IN EXPANSION TANK AIR BLEED OFF THROUGH THE SMALL COOLANT LINES GOING TO EXPANSION TANK.WITH PRESSURE CAP OFF RADIATOR COOLANT LEVEL IN EXPANSION IS AT FULL COLD MARK.WHAT YOU TO DO CRANK ENGINE UP LET IDLE WARM UP UNTIL COOLANT DROPS IN EXPANSION TANK KEEP ADDING COOLANT UNTIL STOP DROPPING STAY AT FULL COLD MARK.WHEN COOLANT LEVEL START RISING IN EXPANSION TANK.PUT PRESSURE CAP BACK ON RADIATOR.WHILE ENGINE IDLING WATCH TEMPERATURE GAUGE.IF START CLIMBING TURN OFF ENGINE LET IT SIT FOR LITTLE WHILE TAKE A LARGE RAG OPEN RADIATOR PRESSURE CAP A LITTLE AT A TIME TO KEEP FROM GETTING SCALDING TO RELEASE AIR IN COOLANT SYSTEM.WHEN PRESSURE IS RELEASED OPEN PRESSURE CAP ADD MORE COOLANT IN THE EXPANSION TANK.CRANK ENGINE AGAIN LET IDLE WHEN TEMPERATURE GAUGE START CLIMBING. TURN OFF ENGINE WAIT FOR WHILE BEFORE OPEN RADIATOR PRESSURE CAP.WHEN YOUR THERMOSTAT OPENS WHEN TOP RADIATOR HOSE IS HOT AND ENGINE COOLANT TEMPERATURE GAUGE STOP CLIMBING AND COOLANT LEVEL STOP DROPPING IN THE EXPANSION TANK.ALL AIR IS EXPELLED FROM COOLANT SYSTEM TO KEEP ENGINE FROM OVERHEATING.

Jun 10, 2011 | 2001 Cadillac DeVille

2 Answers

Having issues with a 2000 chevy impala overheating have changed the radiator and the thermostat fans seem to be working ok but overheats at idle in stop and go traffic, after a certain amount of time it...


YOU NEED BLEED COOLANT SYSTEM.CHECK COOLANT LEVEL IN RADIATOR.ADD MORE DEXCOOL UNTIL COOLANT LEVEL IS CLOSE TO RADIATOR SPOUT.CRANK ENGINE LET IDLE UNTIL TOP RADIATOR HOSE GET HOT.WATCH TEMPERATURE GAUGE.IF TEMPERATURE GAUGE START RISING TO HOT ZONE.TURN OFF ENGINE.LET COOL DOWN.USE LARGE RAG SLOWLY OPEN RADIATOR CAP A LITTLE AT A TIME UNTIL ALL PRESSURE RELIEVED.REMOVE RADIATOR CAP.ADD MORE COOLANT.CRANK CAR AGAIN LET IDLE UNTIL TOP RADIATOR GET HOT.KEEP EYE ON TEMP.GAUGE ALSO.WHEN TEMP.GAUGE STOP CLIMBING.YOUR COOLANT SYSTEM BLED.WHEN DONE LET CAR SET A WHILE CHECK COOLANT LEVEL.ALSO FIRST THING IN THE MORNING CHECK COOLANT LEVEL AGAIN.AND BESURE ADD COOLANT IN THE OVERFLOW JUG TO THE COLD MARK.DONT OVER FILL THE COOLANT RESERVOIR JUG.WORK SAFELY DONT GET SCALDED.

Feb 15, 2011 | 2000 Chevrolet Impala

1 Answer

Mechanic says that my timing chain needs replacing - but states the pistons may be bad also -- is this true


940 engines run on timing belt. Replacement is needed as per recommendation in the manual. Your are able to check if pistons compression rings and oil rings are bad by carrying compression test, pulling out the oil dipstick while engine is idling and vapour is is noticeable coming out and opening the engine oil filler cap after stopping the engine, vapour is observed then you may have problems with these rings.

Nov 02, 2010 | 1994 Volvo 940

1 Answer

Checking transmission oil 2003 audi a6 tdi auto


At the bottom of the automatic gearbox (tiptronic) you will find 2 threaded plugs on below surface. First (in front of the car) is for emptying, and second is for filling up. Tightening torque is 24 Nm.

b741ce6.jpg
Automatic Transmission Fluid (ATF) checking:
1. Requirements for check:
1.1. Vehicle standing on level surface.
1.2. Transmission must not be in fail-safe mode.
1.3. Shift lever in "P" position, parking brake applied.
1.4. Engine idling.
1.5. Air Conditioner and heater OFF.
1.6. ATF temperature must not exceed 104 Fahrenheit degree (40 Celsius degree) at start of test.
1.7. Only ATF with designation ESSO LT 71 141 may be used. Do not use any lubricant additives.
1.8. Automatic Transmission Fluid ATF - part number: G 052 162 A2 (1 liter wrapping)
1.9. An ATF level check when transmission oil temperature is too low results in overfilling, when too high results in underfilling.
2. CAUTION: Too much or too little ATF will affect the operation of the transmission. The ATF level must be checked at regular intervals.
3. The oil level is correct if a slight amount of oil runs out when ATF temperature is between 86 Fahrenheit degree (30 Celsius degree) and 113 F deg (45 C deg) (caused by increase of oil level when heated). For warmer climates, 122 F deg (50 C deg).
4. Hang filled ATF reservoir VAG 1924 as high as possible.
5. Shift lever in "P" position, engine running at idle.
6. Place oil drip pan under transmission oil pan.
7. Remove ATF filler plug (at the bottom of the automatic gearbox you will find 2 threaded plugs on below surface. First (in front of the car) is for emptying, and second is for filling up.
8. With ATF temperature between 86 Fahrenheit degree (30 Celsius degree) and 113 F deg (45 C deg), for warmer climates, 122 F deg (50 C deg), a slight amount of oil will flow from filler hole when ATF level is correct.
9. If necessary drain or top off ATF to attain correct oil level. Top ATF with filler hook from VAG 1924 ATF reservoir. Insert VAG 1924 (tool) ATF reservoir filler hook into filler hole and top off until a slight amount of oil flows from filler hole.
NOTE: Fit filler hook into one of the oil deflector cap slots placed on the filler opening.
CAUTION: Do not press filler hook upward or oil deflector cap can be pushed off.
10. Reinstall ATF filler plug. Tightening torque is 24 Nm.

Oct 16, 2010 | 2000 Audi A6

1 Answer

How to locate the transmission fluid filler screw ?


At the bottom of the automatic gearbox (tiptronic) you will find 2 threaded plugs on below surface. First (in front of the car) is for emptying, and second is for filling up. Tightening torque is 24 Nm.

5b13d56.png
Automatic Transmission Fluid (ATF) checking:
1. Requirements for check:
1.1. Vehicle standing on level surface.
1.2. Transmission must not be in fail-safe mode.
1.3. Shift lever in "P" position, parking brake applied.
1.4. Engine idling.
1.5. Air Conditioner and heater OFF.
1.6. ATF temperature must not exceed 104 Fahrenheit degree (40 Celsius degree) at start of test.
1.7. Only ATF with designation ESSO LT 71 141 may be used. Do not use any lubricant additives.
1.8. Automatic Transmission Fluid ATF - part number: G 052 162 A2 (1 liter wrapping)
1.9. An ATF level check when transmission oil temperature is too low results in overfilling, when too high results in underfilling.
2. CAUTION: Too much or too little ATF will affect the operation of the transmission. The ATF level must be checked at regular intervals.
3. The oil level is correct if a slight amount of oil runs out when ATF temperature is between 86 Fahrenheit degree (30 Celsius degree) and 113 F deg (45 C deg) (caused by increase of oil level when heated). For warmer climates, 122 F deg (50 C deg).
4. Hang filled ATF reservoir VAG 1924 as high as possible.
5. Shift lever in "P" position, engine running at idle.
6. Place oil drip pan under transmission oil pan.
7. Remove ATF filler plug (at the bottom of the automatic gearbox you will find 2 threaded plugs on below surface. First (in front of the car) is for emptying, and second is for filling up.
8. With ATF temperature between 86 Fahrenheit degree (30 Celsius degree) and 113 F deg (45 C deg), for warmer climates, 122 F deg (50 C deg), a slight amount of oil will flow from filler hole when ATF level is correct.
9. If necessary drain or top off ATF to attain correct oil level. Top ATF with filler hook from VAG 1924 ATF reservoir. Insert VAG 1924 (tool) ATF reservoir filler hook into filler hole and top off until a slight amount of oil flows from filler hole.
NOTE: Fit filler hook into one of the oil deflector cap slots placed on the filler opening.
CAUTION: Do not press filler hook upward or oil deflector cap can be pushed off.
10. Reinstall ATF filler plug. Tightening torque is 24 Nm.

Aug 17, 2010 | 1999 Audi A4

1 Answer

How do i inject the transmission fluid in the transmission


there is a small filler neck in frt. of the trany , with red cap on it. Brake the cap , there will be a plug under.
Proccedure : engine on idle , take of plug at the bottom of trany oil pan(with engine on idle!!!!! , if engine off , fluid will leak out) , use transfering pump to pump oil in to filler neck untill it starts leaking from bottom plug , wiat till it only drips , put bottom plug back in and torque it. Now you can shut engine off and seal filler neck.
Use only approved trany fluid .This trany takes syntetic fluid.

Apr 22, 2010 | 1996 Volkswagen Jetta

1 Answer

Engine speed drop


That is normal, when the oil cap is dropped the vacuum to the engine drops also cause the idle air valve to close due to lack of vacuum.

Nov 30, 2009 | 1994 Toyota MR2

1 Answer

Bmw 316 1993 L Reg, after losing my oil filler cap, (I drove for a couple of days before discovering cap was missing) i replaced cap, but now have erratic rpm on start up, this lasts for a minute or so...


The good news is they planned on people loosing there oil caps. This is why they put this neat little guard in the valve cover to keep the oil in the engine where it belongs. As far as the erratic idle it sounds as though it is just a fluke that it started at the same time. Try a good tune up and have the MAP sensor checked as well as the idle air speed solenoid cleaned. This should take care of the problem or lead your tech in the correct direction. Hope this helps you out. Good luck.

Jun 04, 2009 | 1996 BMW 318

2 Answers

How do you change the oil filter on a Hyundai Accent 1998/99?


Replace the oil filter after draining the old oil, and" BEFORE "adding new fresh oil, otherwise you'll be dump all that fresh oil, on the ground,while you "TRY to get the new filter installed.

Step 1 Remove drain plug,Drain oil into drain pan
Step 2 Remove oil filter
Step 3 Reinstall drain plug,qnce oil has drained.
Step 4 Fill new filter with oil,lube seal on filter.
Step 5 Install new filter, Add fresh oil to proper level.replace filler cap
Step 6 Run engine check for leaks.
Happy motoring!

May 23, 2008 | 1999 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...