Question about GMC Yukon

2 Answers

2003 yukon rt front passenger doors electrics don't work. window power seat seat heater or side view mirrow

Posted by on

  • jimswiderski Mar 26, 2011

    What fuse would directly cause this problem. There are fuses under the hood, on the right side of the dash , and right above the brake pedal slightly to the left. If I have to remove the door panel , how is this done.
    Thanks in advance.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

It seems strange that all this happened at once, there are 4 different power circuits, i think the first thing to check would be the central plug in for the right front door, you will find the plug in behind and just above the right kick panel, remove the panel and check to see if the plug has came apart, also their is a right door circuit breaker that powers up the right door control module it is located in the instrument panel fuse box it is a 25amp circuit breaker ( the box is located on the left side of the dash between the steering column and the left kick panel ), you cant look at them to see if they are working so just remove it and install a 30amp spade fuse in it place if every thing works with the fuse in it place then replace the circuit breaker with a new one.

let me know how it comes out.

Posted on Mar 26, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 17,130 Answers

Could be due to loss of connection to the window door panel. This can be due to wire break in the harness to the front door panel.
You will need to remove the panels of the two front doors and check individually with a multimeter the power to the panel printed circuit board. Check on the + 12 that is the + B to the circuit. Now depress the switches and check the contacts. If there is absence of the negative ground to the circuit. If so loop a +12 to the circuit to confirm.
All the circuits cannot fails unless with a common cause and if the fuse is intact then this can be the possible reason unless if there are errors/damage in the panel board.

Posted on Mar 26, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 yukon XL one headlight is not getting power, how do i troubleshoot?


If low and high beam both are failing to work check the ground for that side . If high or low one works and the other does not check the fuse for that beam as it has 4 fuses one for each side and low and high. The fuses are in the underhood fuse block . Marked as LO HDLP LT, HI HDLP LT, LO HDLP RT and HI HDLP RT . They are 10 amp fuses .

Feb 04, 2016 | 2003 GMC Yukon XL

1 Answer

Driver side electric seat is stuck in the far forward position and won't move. How do I move it manually or fix the motor.


Auto Repair: How to Replace a Power Seat Motor - YouTube

? 1:44
https://www.youtube.com/watch?v=EDh-0rs5Fjo
Oct 26, 2010 - Uploaded by automdvideos
Auto Repair: How to Replace a Power Seat Motor ... 2007 - 2008 Ford Expedition/Lincoln Navigator Driver Bottom Install Video ...2003-2006 Chevy/GMC Seat Cover Install 1 of 3 - eBay Ready ...2000 Ford Explorer Front Seat Track Stuck Motor Repair - Duration: 4:39. by cubmancan 4,959 views. 4:39.
Drivers seat is dead! No power seat or heat. - TheDieselGarage.comwww.thedieselgarage.com/.../96465-drivers-seat-dead-no-power-seat-hea...Mar 22, 2010 - 2003-2005 Chevrolet Avalanche, Silverado, Suburban, Tahoe 2003-2005.... Power seat on driver side didn't work.....passenger did! Neither ...DANG electric seat ' Chevy Truck Forum ' GM Truck Clubwww.gmtruckclub.com/forum/threads/dang-electric-seat.2990/Apr 27, 2006 - 10 posts - ‎7 authors'03 Tahoe My driver seat just stopped, of corse not where I need it, the ... I have a 2003Tahoe and both heated seats are not working. ... with my seat heater on the drivers seat in my 03 Avalanche, it turns ... The driver's side on my Silverado gets way warmer than the passenger side. ... Frozen New Member.Power Seat Problems?? - Tahoe Forum - Che

Dec 29, 2015 | 2003 Chevrolet Avalanche

1 Answer

Side view mirror light on 2003 GMC Yukon not working


GM calls these the exterior illumination lamps. They receive power from the driver and passenger door modules. The lamps could be bad or something is preventing power from getting from the door modules to the lamps. The "repeater" turn indicators in the mirrors are powered separately so they could be OK while the illumination lamps are not

Nov 27, 2012 | 2003 GMC Yukon

1 Answer

Gmc yukon right door not working


Your solution is a front passenger door module (FPDM),before you replace it check for open fuse in the engine junction fuse box,I dont know the fuse number but it is a 25 amp fuse.8_15_2012_6_16_45_am.gif

Aug 15, 2012 | 2003 GMC Yukon XL

1 Answer

I have a 2008 Chevrolet Silverado 1500, extended cab, automatic truck.......PROBLEM, the drivers side has a power seat, it will not move in any direction and the passenger side front and rear power windows...


How to diagnose this problem ? Viewing wiring diagrams to see what all is invovled in these electrical circuit's , check power supply's an ground connection's using a DMM - digital multimeter !
What type power seat's ? does it have memory ,heated an cooled etc ?
Power Seats System Description and Operation
There are 2 options of power seat systems available in full size trucks. The first is 6 way driver and passenger power seats without memory. The second is an 8-way driver seat plus 4-way lumbar with memory, heat and optional cool function. While the passenger has 8-way power seats with heat and optional cool function. For the driver memory seat operation, refer to Memory Seats Description and Operation. Power seats without memory are completely controlled through the power seat switch. Battery voltage is supplied to the power seat switch through the power seat circuit breaker. While the seat adjuster switches are in an inactive state the switch contacts are closed to the power seat switch ground circuit. When a power seat switch is pressed to an active state the switch contact is closed to the battery voltage supply circuit. Each seat adjuster motor is controlled by the power seat switch through 2 motor control circuits. The seat adjuster motors are bidirectional and the direction of adjuster motor rotation is determined by which of the adjuster motor control circuits is switched to battery voltage while the other remains grounded.

If it has memory seat's there is a control module !
Battery voltage is supplied to the driver seat module through a 25 A circuit breaker. The driver seat module supplies the seat adjuster switch assembly with a battery positive reference voltage. While the seat adjuster switches are in an inactive state the switch contacts are closed to the adjuster switch common circuit.
Both right side windows have a seperate power supply from the left side window's ,has RT DOORS circuit breaker CB1 - 25amp. location left instrument panel fuse block . Circuit breaker's very rarely fail .Do the door lock's work on that side of the vehicle ? The windows won't work with their own switche's ?
The DDS controls the passenger window through a GMLAN message to the PDS. When a power window switch is activated in the up or down positions the PDS supplies power and ground to the window motor control circuits to drive the window motor in the required direction. Prior to activating a power window motor the PDS will supply the control circuit with a low current bias voltage in order to determine that a short to ground condition does not exist, and during window motor operation the PDS continues to monitor the motor current to verify proper window motor operation. (Scan tool support is available for this system)
Check PDM fuse 4 15 amp ,this supply's B+ voltage to the DOORLOCK/WINDOW switch passenger side . Check for broken wires inside the flex boot from the body to the passenger door .

Nov 18, 2017 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Wet floor on the passanger side in front and behind front seat. took out front seat and nothing. 2003 yukon xl 1500 2 wheel drive


Check your radiator fluid level, if it is low it is a good chance your heater core or the hose to the heater core has a leak. The heater core is a small version of a radiator which has the air from the blower blow across it to force warm air into the cabin of the vehicle. You will need to probe under the passenger's dash to locate the leak.

Nov 16, 2010 | 2003 GMC Yukon XL

1 Answer

Have an 2003 yukon took passenger door panel off disconneted window switch reassembled now nothing on the passenger door works the switch wont side view mirror wont and keyless entry wont


Take it apart again you probably didn't lock connectors tight or pinched a wire or something silly.
Go at it again slowly you'll find it.

Apr 30, 2010 | 2003 GMC Yukon XL

1 Answer

Removing passenger door panel


There is a screw behind the lock rod. Lift door panel straight up to remove

Jun 13, 2009 | 2003 GMC Yukon XL

1 Answer

2003 Yukon XL Front passenger side door: Electric


yes it does sound like that is your problem. try checking for used one.

Mar 11, 2009 | 2003 GMC Yukon Denali

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...