Question about Isuzu Stylus

1 Answer

I put in the key turn it and nothing happens but the hazard lights light up also the headligts but the inside lights dont turn on neither the dashboard when i turn the key

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 130 Answers

Sounds like the battery is too dead to start the motor.. Try a jumpstart or battery charger.

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the hazard light relay located?


The button is bad. the flasher is in the fuse panel.

Mar 15, 2016 | 1987 Cadillac Seville

2 Answers

Chrysler Vision hazard light


on some of these models, the hazard switch operates through its own flasher fuse. if this is the case, locating and replacing the fuse ($4) should do it. Location should be in the owners manual.

Nov 10, 2013 | 1997 Chrysler LHS

1 Answer

Turn signal hazard lights work but not running lights


The parking lights should be on a different circuit from turn signals - hazard lights. The bulbs usually have two filaments, one for each circuit.
On most models there is a tail light fuse and relay that handles front and rear parking lights.

Jun 28, 2013 | Toyota Tacoma Cars & Trucks

1 Answer

Will not start because of the security system 1995 Toyota Previa


Aftermarket alarm??? Have it taken out and the vehicle put back to stock. Once those types of alarms get old they tend to fail

Feb 11, 2013 | 1995 Toyota Previa

1 Answer

Nothing will power up


Have you checked your ignition switch!

Jun 02, 2012 | Mitsubishi Cars & Trucks

1 Answer

I recently replaced the timing belt on my 92 tercel. everything is running fine however my hazard lights blink when ever the key is in the ignition they will blink for awhile stop then continue


Are you saying that the key just has to be in the ignition? Or you need to turn the key before it
happens?

Most likely, there is a problem with the switch that you push to turn on the hazard lights.
Either the switch itself is damaged and somethings loose inside it which is making the
hazard lights come on and off randomly, or the wires going to the switch are making contact
with each other.

Remove the switch and see if the button feels loose, and check the wires going to the switch.
To remove it you need to detach the plastic piece that covers above an below the gauges that the switch is housed inside. There are 2 phillips screws that hold it on on top. And pull off the knob
that you use to to dim and brighten the lights on the gauge cluster. Remove the nut under that knob. Then you can pull the plastic cover away and detach the switch. Then check the wires and switch.

If you needed to get another switch you would probably need to get it from a Toyota dealer or
from a wrecking yard. i would get it from the wrecking yard if there are any in you area.

Or the turn signal/hazard flasher may be malfunctioning. The same flasher is used by the turn
signal and hazard lights. Maybe the components in the flasher that control the hazard lights are
not working right. So you could try changing that if you wanted to. Its located somewhere in
the relay center under the hood or near one of the fuse panels.

Are the turn signals working correctly?

And its just coincidence, chaging the timing belt has nothing to do with it.
I drive a 92 Tercel too. But ive never had a problem like this.

Jul 14, 2011 | 1992 Toyota Tercel

1 Answer

1989 ford truck f350 diesel. head lights,hazard lights, and horn have power and work, batteries are charged but truck will not crank. when i put key in and turn the key over nothing happens....no buzzer,...


1989 f250 4x4 lighting problems. i replaced the floor mounted dimmer switch ,the lights worked fine for an hour untill i turned them off.Now the lights will not turn back on but i have park lights.

Aug 09, 2010 | 1989 Ford F 350

2 Answers

Brake light/turn sigs dont work.But lights are on?


Ok, GM had a problem with their hazard light switches in the years of around 2001-2005. These caused some bizarre workings concerning the hazards, lights, turn signals, etc. The circuits overlap, and when the switch malfunctions, it makes for some odd happenings. Normally, when the hazards are on, they cancel out the brake lights and the turn signals, since they use the same circuits. The normal taillights use a different filament in the same bulb, which is why they light up brighter when you press the brakes. The aftermarket has come up with replacement switches in response to these inherent problems, so do not get your switch from GM. Places like RockAuto.com will sell these, though not necessarily this place, it's just the one I use. Usually, GM put these in the steering column, so replacement can be tricky for the average person, as it involves taking apart some of the steering column.

Feb 22, 2010 | 2004 Pontiac Grand Prix

1 Answer

2004 monte carlo. Turn signals dont work. The stalk still works with other functions, such as wiper, brights. The fuse is fine. Could it be a bad relay? When u push the stalk up or down nothing happens on...


try pressing the hazards on and off if they still don,t work replace the flasher unit. it is built into the hazard switch( all one unit ) change this and all will be good.

Aug 30, 2009 | 2004 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...