Question about 1991 Honda Civic

1 Answer

On my 91 civic all the seatbelts are fastened and the seatbelt light still flashs and the warning beeper is beeping how can i resolve this prob.?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 111 Answers

My guess, the switch that is in the female end of the drivers side seat belt. The switch is bad or it's come unpluged or it's corroded. It's hard to get at without pulling the seat (four bolts and a harness plug). The plug for the seatbelt plug is usually under the carpet but if you pop off the plastic cover over the bolt that holds the female end of the belt to the car body there is usually enough slack in the wire to pull it up enough to see if the plug or wire is broken or corroded. If not, pull the bolt (it will be lock-tited in so it will come out hard). If the wire looks good, ground the lead wire (wire that goes to the drivers side female end of the setbelt). If the light goes out the switch in the female end of the belt is bad. If it still does,t go out, well I'd have to be there to troubleshoot it further.
Hope this helps.

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Seatbelt warning light keeps flasing when seatbelt is fasten


Belinda, could be a bad wire,plug,seat belt switch/sensor. Have a good tech. diagnose and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Seat Belt And Battery Lights Flashing
Driver Side Seat Belt Buckle Open short
Hyundai Seat Belts Repair Replacement

Aug 11, 2016 | 2005 Hyundai Accent

1 Answer

What is A service code


I don't know what a service code is on your truck, but on my Ford Ranger, it's a series of beeps that I get when I first start the engine. It something isn't working right, the seatbelt minder beeper starts off with a series of beeps that indicate what's wrong. It might be something like 4 beeps, or three long beeps and two short ones. After that , it goes into the 24 beeps...pause...24 beeps that indicate that I don't have my seatbelt fastened.
On your truck, it might be different. It might be a series of flashing LED lights or something. Check your User's Manual.
Also, you can always to to Advance Auto Parts and they'll hook it up to a handheld diagnostic indicator for free.

Dec 02, 2014 | Cars & Trucks

1 Answer

Security light flashing


I have this problem if I jump in and start the car too quickly. It will shut off and the security light flashes. Thankfully it never happens when I'm on the road! I think it's related to the seatbelt switch. There's a wire under the driver seat connected to a sensor in the seatbelt buckle that tells the computer when the seatbelt is fastened. I tried spraying WD-40 into the seatbelt buckle to clean it, which helped, but it is still loose and intermittent. When it happens the remote won't do anything to get the car unlocked and started. I just have to wait ten minutes for the security system to reset itself.

Jul 21, 2014 | 2002 Saturn VUE

1 Answer

Jeep cherokee 1995 makes 10 beeps after 5 mins


How many does it make after 10 minutes? Try fastening the seatbelt, or making sure the seatbelt sensor works. Its in the buckle down below the seat. If its unplugged, the seatbelt sensor cannot report that the seatbelt is fastened.

Jan 22, 2013 | Jeep Cars & Trucks

1 Answer

Seatbelt beeps constantly even went belts are fastened


See if there is a plug under your driver's seat that is unplugged. Can you remember shoving anything under the seat that might have caused it to come unplugged?

May 09, 2010 | 1991 Honda Civic

1 Answer

Warning light came on this morning, figure of a man with the seatbelt. What does this indicate?


This is the seatbelt indicator, its not seeing that your seatbelt is fastened ifthe light stays on and the chime keeps going off.

There is a switch inthe seatbelt that closes when the seatbelt is buckled, and if not, thelight stays on and the chime goes off.

There are a couple reasons thiscould happen. It could be a wiring issue going to the seatbelt buckle,or more likely the buckle itself. Your truck is pretty new, so if youare under 36,000 miles the repair would normally be covered underwarranty.

Also, I suggest check the Repair Manual for Jeep-WK-Grand-Cherokee-Section-08O-Restraints (page 473 and next, for Seat Belt)

Hope helps with this (remember rated this) Good luck.

Jan 21, 2010 | 2006 Jeep Grand Cherokee

1 Answer

Drivers side seatbelt connected When truck is


sensor in the seat belt bukle needs to be replaced

Aug 01, 2009 | 2004 Ford F150

1 Answer

Seatbelt chime and light go off even when belts plugged in.


You mean when the belts are not fastened right?
In the owner's manual it talks about how to disable the seatbelt warning by fastening then unfastening the belt in an exact pattern at an extact time.
I do not know if that will help but it may be a key to finding a solution.

Jun 06, 2009 | 2004 Ford F150

2 Answers

1991 CIVIC LX AUTOMATIC SEATBELTS NOT WORKING.


I had a problem on a 91 Civic DX where the drivers auto seat belt wouldnt move and the beeper would not stop.Had a blown seat belt fuse.Replaced the fuse no more problem. The Seat belt fuses are located under the red cover that covers the positive battery terminal. On mine the fuse closest to the font of the car was for the drivers side auto seat belt the one closest to the windshield is for the passager seat belt. They are green and rated at 30A.

Nov 08, 2008 | 1991 Honda Civic

1 Answer

Seat belt beeper


Ther might be a wire under your seat that you can possibly un hook

Oct 04, 2008 | 2005 Honda Civic

Not finding what you are looking for?
1991 Honda Civic Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...