Question about Chevrolet Camaro

Open Question

Egr solenoid code 77 on a 95 chevy camaro 3.4l

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: A/T 2-3 Shift Solenoid Circuit Malfunction (4L60E,

Your car has the 4l60e. Are you getting a code? The solenoid could be bad or there could be a wiring problem. I'd take a quick visual inspection of the harness where it enters the transmission. If that looks ok, drop the transmission pan and locate the 2-3 **** solenoid, it's on the rear of the valve body. Check the wiring inside the transmission. If that looks ok I'd go ahead and replace the solenoid. It's held in by one torx head bolt. Remove the bolt, pull out the solenoid and remove the wiring. New one just bolts right in. Those solenoids are pretty cheap from the dealer, should cost you about $20.,

Posted on Apr 19, 2009

Ad
mcgyver468
  • 710 Answers

SOURCE: 1988 camaro egr solenoid

NO IT SHOULD NOT HAVE A LEAK. IT COULD HAVE A LEAK IN THE DIAPHRAGM. PRESS ON THE TOP OF THE EGR VALVE TO SEE IF IT MOVES. IF IT DOESN'T. THEN REPLACE IT.I HOPE THIS HELPS. LET ME KNOW. GOOD LUCK

Posted on May 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

EGR solenoid location 99 GM 7.4


EGR solenoid is inside the EGR valve assembly
Have a look at this video.

How to Change EGR Valve on 7 4L Vortec Chevy Engine Step by Step Guide

Hope it helps.

Feb 12, 2018 | GMC Cars & Trucks

1 Answer

I have codes p0404&p0405 on a 98 Chevy Malibu 2.4, what can I check and how to fix?


codes p 0404 refers to exhaust gas recirculation (EGR) system---range /performance====causes hose leaking/blockage---wiring---EGR valve /solenoid
code p 0405 refers to EGR valve position sensor A---low input===causes ---wiring short to ground --EGR valve position sensor ---ECM
replace the egr system is a good option

Mar 09, 2017 | Cars & Trucks

1 Answer

I keep getting a P0441 code -Evaporative Emission Control System Incorrect Purge Flow on my 1996 chevy camaro it has the 3.5 v6 motor


TO TEST WHERE THE PROBLEM IS COMING FROM IT'S A LEAK TEST MAKE WITH SPECIAL TOOL .
LOOK FOR PURGE SOLENOID STUCK OPEN

Oct 15, 2013 | 1996 Chevrolet Camaro

1 Answer

Vacuum diagram fr a 97 chevy tahoe


are you talking about the egr vacuum solenoid, if so these solenoid have a filter on them and they rot when getting old and filter falls off and where filter was it looks like a vacuum hose would go there, you should have 1 vacuum hose to solenoid and 1 from solenoid to egr valve, you could possible have a bad egr solenoid, any codes set ?

Sep 03, 2012 | 1997 Chevrolet Tahoe

2 Answers

Chevy pickup 350 vortex code p-1406 comes up can't find what code means in my book. i know it has something to do with manufacturer control auxiliary emissions controls. i don't know where to look for the...


DTC P1406 IS EGR VALVE PINTLE POSITION CIRCUIT MALFUNCTION CONDITIONS.POSSIBLE CAUSE EGR SOLENOID CONTROL CIRCUIT IS OPEN SHORTED TO GROUND OR TO B+ -CHECK EGR VALVE FUSE - OR THE EGR VALVE AND PCM HAS FAILED.

Jul 09, 2010 | 2002 Chevrolet Silverado 1500

1 Answer

1988 camaro egr solenoid


NO IT SHOULD NOT HAVE A LEAK. IT COULD HAVE A LEAK IN THE DIAPHRAGM. PRESS ON THE TOP OF THE EGR VALVE TO SEE IF IT MOVES. IF IT DOESN'T. THEN REPLACE IT.I HOPE THIS HELPS. LET ME KNOW. GOOD LUCK

May 01, 2009 | 1988 Chevrolet Camaro

1 Answer

A/T 2-3 Shift Solenoid Circuit Malfunction (4L60E, 4L80-E. thats what one of the codes in my car saids, those anyonme know what that means , 1996 chevy camaro v6 auto.


Your car has the 4l60e. Are you getting a code? The solenoid could be bad or there could be a wiring problem. I'd take a quick visual inspection of the harness where it enters the transmission. If that looks ok, drop the transmission pan and locate the 2-3 **** solenoid, it's on the rear of the valve body. Check the wiring inside the transmission. If that looks ok I'd go ahead and replace the solenoid. It's held in by one torx head bolt. Remove the bolt, pull out the solenoid and remove the wiring. New one just bolts right in. Those solenoids are pretty cheap from the dealer, should cost you about $20.,

Apr 19, 2009 | 1996 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

81423 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...