Question about Ford Focus

1 Answer

2003 ford focus headlight plug burned out - Focus Ford Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,977 Answers

This sounds like the wires in the plug have shorted together at times and overheated the plug.or the wiring near the plug touched and overheated,look at the wiring from the plug back a ways and see if it looks like it has gotten hot or signs of melting,you may need to repair the wires when the plug is replaced.check the headlight bulb as well for signs of getting hot at the base of the bulb or just replace the bulb.

Posted on Mar 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the relay switch on a 2003 ford focus for the headlights


Check the owner's manual for all fuse and relay locations, but there is no such relay for the headlights, the dimmer switch is likely the problem. Have it diagnosed electrically.

Sep 20, 2016 | 2003 Ford Focus

1 Answer

Low beam does not light up


If your highbeams work theres a strong possibility that BOTH your headlight bulbs the low beam filament is burned out, if the highbeams dont work either check all related wiring and fuses for the headlights also the headlight switch on your steering column....

Dec 07, 2010 | 2003 Ford Focus

2 Answers

How to replace a 2001 ford focus headlight switch assembly


p, li { white-space: pre-wrap; }

Turn the engine off, open the hood, and disconnect the negative battery cable (--) with your pliers.



Locate the power distribution box against the firewall on the driver's side of the engine compartment. Flip up the latch and remove the plastic cover.



Determine which headlight fuse you want to replace. The 2001 Ford Focus uses four headlight fuses--one for each headlight. Fuse number 16 is for the passenger side low beam; fuse number 17 is for the driver's side low beam. Fuse number 26 is for the passenger side high beam; fuse number 27 is for the driver's side high beam.



Grasp the fuse with your fingers and pull it straight out of its mount. Insert the new fuse in its place. Replace the plastic cover and reconnect the negative battery cable.

Sep 26, 2010 | 2001 Ford Focus

1 Answer

Whenever I turn my headlights on my ford focus 1.6 xl 2003, full beam is always on. How can I turn full beam off?


the hi-lo beam switch may be bad. i dont think you can turn it off unless you keep playing with the switch and get them to go to low beam.

Oct 21, 2009 | 2003 Ford Focus

1 Answer

2003 Ford Focus - left dashlight out


Haynes manual for 2000-2005 Ford Foci,(plural for focus), page 12/17. You will most likely have to remove the cluster from the dash. Read warnings.

Mar 15, 2009 | 2003 Ford Focus

1 Answer

Engine light came on, temperature max heat.


It sounds like a plug got disconnected during the headlight change.

Feb 20, 2009 | 2003 Ford Focus

1 Answer

Lights on dash don't won't and back headlights


Check your fuse box. Sounds like it may be a fairly inexpensive fix.

Jan 31, 2009 | 2003 Ford Focus

1 Answer

Headlight aiming too high


Make sure the bulb was put in correctly and sitting flat as bulb replacement does not require head light adjustment.Check head light bulb before attempting to adjust

Nov 19, 2008 | 2003 Ford Focus

1 Answer

Headlight problem


first off if you paid to have it replaced then i would take it back to them for the adjustment if not there will be some sort of adjustment screws on the whole lamp assembly not sure exactly where on a focus but if you are persistant you will find them. then find a spot to park car close to a wall so you can see the lights projected on the wall and adjust to the driver side level

Nov 19, 2008 | 2003 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...