Question about Ford Focus

1 Answer

Hi, My Cruise Control/Speed Control has stopped working. When functioning properly, you push the "On" button on the steering wheel and a small green cruise control icon lights up in the instrument panel. When i press the "on" button, no icon lights up and the cruise does not work? What path should I follow to diagnose the problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 84 Answers

1. check fuses - owners manual.
2. check relays in engine compartment - owners manual
3. check the cruse controler and cable connected to the carb./throttle body.
4. wiring

Posted on Mar 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My horn isn't working on a Chevy equinox but it's a new horn. What could be wrong with it..and my cruise control don't qork. Is it my steering wheel?


Was Cruise Control working before the New Horn was installed? The power supply to the Horn, (input to ground wire) is connected to the Cruise Control Module (CCM). This CCM is wired to the Relay Switch Box located in the Engine Bay. The Relay Box cover will have a Chart indicating what function each Relay coresponds to. Your local autoparts store (AutoZone) can test the Relay Switch, and you'll know (if any Relay) need to be replaced.

The CCM is also wired to the Steering Wheel, but first passes through the Clock Spring Coil, located just behind the Steering Wheel. The Clock Spring allowes for the Function Buttons on the Steering Wheel to have power while Steering Wheel spins.

The Clock Spring can malfunction or break, its rare, but this will cut power to the Function Buttons on Steering Wheel. If ALL the buttons on Steering Wheel dont work, then the Clock Spring is the Culprit. The Coil may need to be replaced.

The Cruise Control Module itself may have failed and also would cause a few or all Steering Wheel Functions to quit working.

But first check the Relay Switch Box and examine the Harness Cables connecting (Steering Wheel--to--CCM--to--Relay Switch Box--to--Battery Supply).

Also if Cruise Control was working before the new Horn was installed and now not working, then most likely the Problem is a bad wire connection somewhere and/or is a faulty Relay.

(Any Questions/comments jtobias1020@gmail.com)

Feb 26, 2017 | Chevrolet Equinox Cars & Trucks

2 Answers

How to test a cruise control sensor


Check for power then check for resistance when a button is pushed. Each button has a different resistance

Jan 01, 2015 | 1993 Nissan Sentra 4 Door

1 Answer

Cruise control stopped working


You cant upgrade to HID lights on your car without the proper wiring right? Same with anything electrical in a vehicle if your vehicle didn't have all these extra buttons then your controlling unit for these devices are not compatible and not gonna work. Different units/different functions. You need to have the proper wiring harness for that wheel and the brain that operated all those buttons. Your airbag isn't recognized that's why you have the light on!!!

Apr 25, 2014 | 2004 Chrysler Sebring

1 Answer

Ford focus cruise control


Once you have turned your cruise control on accelerate to desired speed press SET button on right hand side of steering wheel before lifting foot from accelerator, then remove foot from accelerator. pushing RESUME button will deactivate cruise control without turning it off. Then when clear of traffic push resume again to activate cruise control. It will automatically resume to previous set speed.

Apr 30, 2013 | 2006 Ford Focus

2 Answers

How to use cruies controw on a 1997 isuzu rodeo


First-on dashboard right hand side of steering wheel there are large (approx 1" sq) buttons-push to turn on-push again to turn off-for the rearwindow defroster,hazard flashing lights and....cruise control. Push cruise button to "on" and you'll see green lights on speedometer bezel light up. On end of wiper control stick on rightside of steering wheel-you'll find a pushbutton. Get car to speed you want-then push this button in. To turn off cruise control completely-push first button you pushed on dashboard.

Mar 21, 2010 | 1997 Isuzu Rodeo

1 Answer

How to use cruise control


Here are the steps in using cruise control:

  1. Get on a road you will be traveling at the same speed for a long period of time, such as a freeway.
  2. Reach your desired speed. Choose a speed that allows you to move with the flow of traffic and not go over or under the designated speed limit for that road.
  3. Locate the ON and SET buttons on your steering wheel. Press ON first and SET after. Your cruise control is now activated. Most vehicles must be traveling at least 30 miles per hour to set the cruise control.
  4. Press and hold the SET button if you wish to use cruise control at a higher speed. Hold until your desired speed is reached.
  5. Decrease speed by pressing the COAST button.
  6. Push the brake pedal to disengage the cruise control function. If you wish to return to the previous set speed, use the RES (resume) button. You must be traveling at least 30 miles per hour for this function to resume.
  7. Erase any previous speed by pressing the OFF button.

Feb 11, 2010 | 2000 Nissan Maxima

2 Answers

My brother just bought a 2004 Lincoln Town Car Signature.....I helped him find this car and he now tells me that the cruise control does not work.....My guess is that he is trying to set the speed and not...


Turn on the Cruise control ON on left side of steering wheel accelerate to desired speed push set button on right side of steering wheel to turn cruise OFF press off or tap brake pedal

Jul 17, 2009 | 2004 Lincoln Town Car

2 Answers

What are the functions of Resume &Coast buttons in steering wheel


If set at a specific speed and you have to slow down by hitting the brakes, The brakes turn off the cruise control. Pressing resume automatically turns the cruise control back on and accelerates to the previous speed setting. You can also use it to accelerate and by releasing it the new speed will be set.

Jun 18, 2009 | 1996 Mercury Grand Marquis

1 Answer

Why cruise control won't work on 2003 ford explorer


If you hit "On", cruise control is on. It's just not set to the speed.

To properly set the cruise control, do the following procedure:

  1. Select the "On" button on the left side of the steering wheel
  2. On the right side of the steering wheel, there is a "+" along with "Set", press that button after you have accelerated to the speed you desire to maintain.
  3. Use the "+ and -" to speed up or slow down your vehicle.
  4. To temporarly disable the cruise control, simply press the brake pedal.
  5. To resume the previously desired speed, press the top button "Resume"

Jan 20, 2009 | 2003 Ford Explorer Sport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...