Question about 1993 Ford Ranger SuperCab

1 Answer

Abs light comes on. it is somewhat intermittant, but comes on and stays on more often than not. 1993 ford ranger.

Posted by on

1 Answer

I had the same problem with my 93 ranger. You ether blew a break line or you have a master cylinder problem.

Posted on Aug 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Short in signal lights


If your ABS light comes on and it blinks on and off and you have no signal lights working. You have a short in your tow hitch wiring. Disconnect or replace the wiring and change your fuse to your ABS system. The ABS light will stop blinking and it will stay off.

on Oct 01, 2011 | 1993 Ford Ranger SuperCab

2 Answers

Need to reset ABS light on 1996 Ford Ranger


Maybe you have a bad speed sensor, its a shot in the dark but that sensor controls a lot of functions like the ABS, speedometer, check engine light can come on, automatics will shift hard or may not shift at all, o/d will flash. The video below shows a 1999 ford ranger automatic but if you check you might have the same sensor.

Feb 09, 2014 | 1996 Ford Ranger SuperCab

1 Answer

Abs light stays on and is flashing a i think acode


hi Robert

you can check the ABS fault code as following:

switch ignition on and wait for the abs light to start to flash.
it will flash in long and short flashes, long flash stands for ten, short flash stands for one, there is a short pause in between, and long pause after each code, take a note of the code and Google it
good luck
9ba390f1-ca01-44ac-85b4-4603e1244a3a.jpg

CODE 12 CODE 21

Jan 17, 2014 | 1993 Ford Ranger SuperCab

1 Answer

1993 Ford Ranger Headlights won't stay on


you will probably find the problem stated with a poor connection in the headlight switch plug and is now heating up and looseing conection in a short time.remove the headlight switch and you will see what i mean.

Jul 29, 2009 | 1993 Ford Ranger SuperCab

1 Answer

Abs rear light stays on


The sensor is located I believe on the differential housing,could be faulty or corroded

Jul 10, 2009 | 1993 Ford Econoline

2 Answers

2000 ford ranger speedo quit working


speed sensor in trans faulty,connections at sensor,wiring broken

May 09, 2009 | 1993 Ford Ranger SuperCab

1 Answer

ABS light won't turn off.


It could be that changing the switch told the ABS there was a fault. Try removing the fuse for the ABS and waiting 5 minutes for it to reset. ---I had a small ABS issue with my Volvo and the ABS fuse had blown. Good luck-- and if this helped can you give a rating?

Mar 27, 2009 | 1999 Ford Ranger SuperCab

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

Related Topics:

476 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...