Question about Chevrolet Lumina

1 Answer

My blinker knob came loose inside steering wheel, can i go in through were the horn is to get to where that knob connects and fix it WITHOUT MESSING ANYTHING UP LIKE THE STEERING OF THE CAR?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Chevrolet Master
  • 1,249 Answers

Depending on the year of your Chevy...you will need to remove the steering wheel (with a puller available as a loaner from some parts stores...If your chevy is pre-1993 there will not be an air bag...you need to re-align the wheel to match the pull off spot...and you will not affect the steering that way...Hope this helps.

Posted on Mar 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Horn on a 2010 silverado will not work either from the steering wheel or key fob


25623455-wzebh3wm2pqtxjspbd0s5gn0-4-0.jpg

25623455-wzebh3wm2pqtxjspbd0s5gn0-4-2.jpg

25623455-wzebh3wm2pqtxjspbd0s5gn0-4-5.jpg

25623455-wzebh3wm2pqtxjspbd0s5gn0-4-9.jpg

25623455-wzebh3wm2pqtxjspbd0s5gn0-4-14.jpg

25623455-wzebh3wm2pqtxjspbd0s5gn0-4-20.jpg
You have all the informations to find your problem. jump a wire on connector X4 G1 tan wire to ground and check X1 E5 with a test light or multimeter to see if there is a output, you should have 12 volts. If you dont have any voltage the horn relay is defective. I check in the shop manual and the relay come with the underhood fuse block.

Apr 02, 2015 | 2010 Chevrolet Silverado 1500

1 Answer

Brothers truck a 1987 ford f150, the horn and cruise were not functioning and key was not smooth turning from lock to start. Replaced the key ignition, also had removed steering wheel and blinker assembly...


You should replace all the wires that are in that steering column. Use OEM wire harnesses. There is a clock spring wire in that column that is bad, The shift indicator is a clip on a piece of string that moves when the column turns with the shifter.

Sep 27, 2013 | 1984 Pontiac Bonneville

1 Answer

My horn goes off without touching, especially in cold weather. usually hitting steering wheel stops it.


Sounds like a loose connection if the horn is activated by pressing on the centre of the steering wheel and it has a airbag the airbag will req removal to gain access to the switch connections

Oct 04, 2010 | 1999 Isuzu Rodeo

1 Answer

Tail lights and blinkers out on a 96 nissan hardbody pick up truck. Also when I turn the wheel to the right my horn honks by itself? Also my speedometer went out as well. I changed my fuses and they all...


  1. First check the alternator maybe you need to replace it.
  2. The horn honks when you turn the steering wheel because the wire inside the steering wheel is not fix.
  3. Visit a good mechanic and good electrician to check the alternator and the wirings.

Feb 05, 2010 | 1996 Nissan Pickup

1 Answer

My 99 oldsmobile alero started honking on its own from time to time. sometimes when i turned the wheel and sometimes not. then one day it started honking nonstop for 20 min. i pulled the relay fuse from...


ok its one of 2 things

1- behind the steering wheel between the column,there is a part called the sir coil,it allows the steering to turn with out getting the wires inside tangled,,this SIR COIL could be bad and making contact when it should not and causing the horn to sound,,,,you would have to remove the steering wheel to remove this part and its easy to mess this up,i would rec a repair shop to fix this,

2-inside the steering wheel is the air bad,which also contains the horn buttons inside,sometimes the air bag swells up and gets hard and applies pressure on the horn buttons inside and cause it to soulnd the horn,,if thats the case you will need a new air bag,,,i would also rc a repair shop for this as messing with the air bag system you can set the air bags off just with static electricity,,,,
but one of those should be your issue i think,,,there is really not way to test those parts unless your a dealer,so i cant tell you horn to test it,you need the special load tools and stuff,,,
Take care

Oct 29, 2009 | 1999 Oldsmobile Alero

1 Answer

A rattle inside the steering wheel.


i would imagine the spring clip for the horn may be loose, or floating around in there, since you shouldnt have even touched the turn signal or any components there, i would definatlysay thats the problem, as far as the air bag, make sure to disconnect the battery and it should be ok, but work with it at your own risk

May 20, 2009 | 1996 Nissan Pickup

3 Answers

Horn blows when steering wheel is turned. Is is a short?


this is caused by a defective/shorted rotating ribbon contact under the steering wheel called a clock spring, to replace this part u must disarm the airbag remove it and the steering wheel and then replace the clock spring, this is a dealer only part.

May 15, 2009 | 1999 Chrysler Cirrus

1 Answer

When turning my horn goes off


it sound like the wire to your horn is loose or has come off your description ends does your horn work regularly?

Feb 05, 2009 | 2002 Honda Accord

1 Answer

Horn doesnt work


its probably not the horn itself but it might be the horn button on the steering wheel, it probably the clock spring messing up , if it is than be very careful with the airbag when you pull the steering wheel off , just disconnect the battery and wait 5 to 10 minutes before disassembling the steering wheel

Oct 26, 2008 | 1998 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...