Question about 2000 Nissan Maxima

Open Question

My 2001 maxima high beam light don't work when the switch is on auto

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

motor1258
  • 6674 Answers

SOURCE: 2000 nissan maxima low beams (both) failed, high

Check fuse panel as well as power distribution under hood , it may be on a separate fuse.

Posted on May 12, 2009

juststinks
  • 98 Answers

SOURCE: I have to replace the halogen headlight on my 2004

no

Posted on May 15, 2009

  • 161 Answers

SOURCE: low beam light does not work only high beam works

double check the bulb. swap the two bulbs if it's only one side of low beams are out (to see if it's the bulb). also take a look at the wiring itself, including where the bulb plugs in, for corrosion or breakage.
if your serious about keeping this Z at stock shape, restoring it, or just keeping it running, you can get goodies for it at blackdragonauto.com

Posted on Jun 17, 2009

  • 5 Answers

SOURCE: 2000 Nissan Maximum. Passenger side low beam only does not work

CHANGE BUILB ANY WAY

Posted on Sep 19, 2009

SOURCE: I have no low or high beams only 1 fog light 2006

Check for the fuses,and also check the bulbs

Posted on Jan 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left operating headlight not working


the switch supplies power to the relays that switch on the lights according to the position you have it at
so on high beam there will be 2 high beam lights working
on low beam there will be 2 low beam lights working
back to passing lights or flashing head lights , both beams will work so the switch is the last item to consider
Now with only one side beam not working it comes back to the ground on that light for that bulb
remember that electricity follows the path of least resistance so it the ground is bad the current will ground out through another point including a light which will switch that light off or make it not work
remember the brakes light that flask when an indicator is used --same thing

Jan 24, 2016 | 2000 Nissan Maxima

1 Answer

High beam headlights stuck on replaced switch same problem


It can be issue with headlight switch,but as its already been replaced.Try disconnecting high beam headlight wiring from headlight assembly and reconnect direct external wire from headlight switch to headlight assembly,then by switch see if headlight is getting off and turning on or not.
See below related help links,similar to your issue.Click the link below:----
Only high beams work but head lights not working on Ford F350?

http://howtobyme.blogspot.com/2011/11/only-high-beams-work-but-head-lights.html

----------------
Only high beams working on GMC Savana?---------- High beams stopped working but headlights still work? http://howtobyme.blogspot.com/2011/11/highbeams-stopped-working-but.html
---------- Working of Headlight switch? ----------

Both headlight bulbs blow together?
----------

Car headlight bulbs don't last long?

------------ Only one head light works on 2001 Dodge Caravan? http://howtobyme.blogspot.com/2011/11/only-one-head-light-works-on-2001-dodge.html

----------
these will help.
Thanks.

Nov 06, 2012 | 2007 Chevrolet Tahoe

2 Answers

I have a 2001 ford focus and went to get an inspection done and if failed due to my high beam lights are not working. I went to AutoZone and spend $30 getting new headlight bulbs. All fuses are good. What...


There is a relay for the high beams that may be faulty. That relay is located in the power distribution box located under the hood of the vehicle in the engine compartment. The relay location will be in the "R5" position in that panel (see diagram of layout below). Other then that you could be looking at a bad switch or a wiring problem nut pretty sure this will be your problem. I hope this helps and good luck.


clifford224_609.gif

clifford224_610.gif

May 28, 2011 | 2001 Ford Focus

1 Answer

2001 Toyota Corolla high beam lights are not


Your switch must be working since your indicator is telling you when the high beams are on, so my guess is that your bulbs are faulty. The high beam part. They probably burnt out one at a time, so you didn't notice until the second one went. Change your bulbs, and see if that solves it. If not, let me know.

Jul 23, 2009 | 2001 Toyota Corolla

1 Answer

2007 Suzuki Vitara rear lights won't come on & switch is on auto


Wiring is cut somewhere or a bulb just needs to be replaced.

Jan 21, 2009 | 2001 Suzuki Vitara

Not finding what you are looking for?
2000 Nissan Maxima Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...