Question about 1995 Chevrolet K1500

1 Answer

How to change a pitmen arm on a 1995 chev silverado 5.7 litter 4 x4

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

You need to get a pitman arm puller. Sometimes you can rent one from the local parts store or canadian tire has a tool loan program. Also you will need a splitting fork to knock out the ball joint fiting. the rest is easy no adjustments are required. Make sure you install a new cotter pin that will come with the pitman arm.

Posted on Mar 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change water pump on a 1995 chevt silverado


This is your happy helper.....
Click on this link and take your pick.
It's way easier than me trying to describe it.
https://www.google.ca/#q=youtube+How+to+change+water+pump+on+a+1995+chev+silverado
cheers

Feb 19, 2016 | Cars & Trucks

1 Answer

How do I reconnect the plug wires to the distributer on a 1995 chevy silverado 1500 5.7


Firing order is 1-8-4-3-6-5-7-2, on passengers side is 2-4-6-8, Drivers side 1-3-5-7, #1 cyl is just to the right of front of the cap looking from front to back. Good-Day!

Sep 10, 2014 | 1995 Chevrolet Lumina

1 Answer

1995 chevy silverado 4 x4 k1500 won't shift out of 2nd


Vehicle Speed Sensor could cause this problem, check it for any loss or bad condition.

Aug 06, 2010 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

How do you replace an actuator on a 1995 Chev 4x4 truck. Won't stay in 4 wheel drive.


if you look at the front actuator part it will show you the bolts to remove its on the front axle tube just unplgg the electrical connector and pull it out amd use some sealer on new one theres nothing inside to worry about its a selinoid that pops out when turned on.hope this helps Thunderboltz

Feb 14, 2010 | 1995 Chevrolet Silverado 2500

1 Answer

6.5Lchev diesel to a ford ZF 5 speed gear box


You will need the Chev pressure plate to suit the Chev flywheel and a clutch plate to suit the Ford ZF gearbox. Ford ZF throwout bearing and clutch fork should be fine.

Jul 01, 2009 | 1981 Ford F 100

1 Answer

Do it yourself oil change


Yes, it has a v-6 the filter is at the front right corner of the motor, down at the bottom. If its a v-8 then its the left rear, close to the drain plug.

Jun 16, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

1997 GMC 4x4 Excessive steering problem major play (3 inches)


You best get under the truck and grab hold of the drag link, idler arm , and tyrod ends and find out whats loose. I would say its either pitmen arm or idler arm. Also chk.ball joints. If you find nothing wrong there the only thing left is the steering gear box.

Apr 08, 2009 | 1995 GMC Sierra C1500

1 Answer

Loose steering


Idler arm, pitmen arm, and tie rod ends, ball joints.

Feb 10, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Replacing interior door handle 1995 chev pick up


Just pull on the Bottom of the Panel and you will be Started. There are a Couple of Screws in the Top panel Like the Arm Rest and the Handle Housing. Got a 95' Silverado also. This happens from time to time. Start at the Bottom of the Door Panel and Loosen. Remove the Screws from the Top Panel. The Panel will Probably not come all the Way off so, You will need to work under it. That Handle is just Pinned. Once you get up to it Just remove the Pin. Buy some Replacement Plastic Clips for the Panel. You will need them!

Jan 22, 2009 | 1995 Chevrolet Silverado 2500

Not finding what you are looking for?
1995 Chevrolet K1500 Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...