Question about 2001 Chrysler Concorde
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 10, 2015 | 2003 Dodge Caravan
Repair open or short in voltage feed circuit to Purge Solenoid.
Repair open in PCM purge command circuit.
Replace purge Solenoid.
Replace vacuum switch.
Repair restriction in Evap line or canister or soleniod.
Repair resistance in purge connector.
Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back.
Otherwise, replace the gas cap, or
Inspect the EVAP system for cuts/holes in tubes/hoses.
Aug 15, 2011 | 2003 Toyota ECHO
Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back.
Inspect the EVAP system for cuts/holes in tubes/hoses
Inspect for damaged or disconnected hoses around the Evap purge solenoid
Check and/or replace the sensor
Check and/or replace the purge valve
Have a professional use a smoke machine to detect leaks
Aug 04, 2011 | Dodge Dakota Cars & Trucks
Aug 03, 2011 | 2001 Toyota Camry
Jun 08, 2011 | 2000 Toyota Camry
Apr 24, 2011 | 2000 Toyota Camry
Jan 11, 2011 | 1996 Saab 900
This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
EVAP emission canister purge is contolled by a valve which allows engine vacuum to pull stored fuel vapors from fuel tank into the engine to be burned, rather than be vented to atmosphere. A vacuum switch is used to detect when flow exists. If the PCM commands purge and sees that the switch is closed (indicating no detected purge flow) P0441 is set.
FB.init("dd7d9e9681341cde77587bc6a2029f6f");OBD-Codes.com on Facebook Symptoms
Likely, no symptoms will be discernible to the driver, other than the illuminated Check Engine Light.
A code P0441 could mean one or more of the following has happened:
With a P0441 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
Sep 22, 2010 | Volkswagen Passat Cars & Trucks
Jun 09, 2009 | 1997 Toyota Camry
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: