Question about 1995 Chevrolet Caprice Classic

1 Answer

I turn on the left hand blinker to my back tail lights and nothing comes on when i have my headlights on

Posted by on

  • amparo893 Sep 30, 2008

    Back right tail light doesn't work and when i tried to disarm the light to change the bulb, the wiring to the fixture isn't easily seperated. I cant pull out the fixture to change the bulb. Does anyone know if the wiring has a trick to it??

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try ur flashers, if its not ur flashers it could be ur turn signal switch. sometimes the contact post goes bad.

Posted on Nov 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2002 Mitsubishi montero sport when i have my headlights on and turn my blinkers on tail lights go out, no dash lights either


You are mixing dual element (2 DOTS) and single element (1 DOT) bulbs.
Open ALL socket and look inside and fit the correct bulb back into the socket.

Jan 17, 2014 | 2002 Mitsubishi Montero Sport

1 Answer

I have an 09 scion xb. When I turn my headlights on the dash lights go off and I can only see my blinker lights. When I turn the headlights off the dash foes back on


Tlhat circuit is directly hooked to your tail lights.. its sort of a warning for you to realize your tail lights are out. Not your brake lights but your tail lights... It could be the bulbs out or the switch or a wire shorted out.

Jul 10, 2011 | 2009 Scion xB

2 Answers

2007 Jeep Grand Cherokee..tail ligts and blinkers do not work when headlights are on..they work otherwise..another problem when headlights or running lights are on and I use left blinker, it blinks...


mporteous, It sounds like you have a light switch problem. I can't think of any other reason for the running lights and tail lights not working in this situation. Are your brake lights working when the headlights are off and how about when they are on? Do your four ways hazard lights work in these situations? Try all the lights under these conditions. The reason the left turn signal blinks very fast is because one of the bulbs are burned out. Try the left signal and one light (front or back) will stay on and the other will not come on at all. Replace the bulb that does nothing. Do this before you try all the lights in different situations. I think that you will have to replace the light switch. Good luck with this.

May 19, 2011 | 2007 Jeep Grand Cherokee Overland

1 Answer

When I turn on my right blinker, the side


most likely a bad ground in your electrical system; consult your local mechanic

Oct 06, 2009 | 1993 Mercury Villager

1 Answer

Left rear tail lights/ blinker will not come on


Blinker too fast, the same side blinker light bulb on the front (or back) is burned. Check the fuses for the rear lights. You might have a light bulb filament stuck.

Mar 30, 2009 | 2006 Dodge Charger

1 Answer

Left blinker light stays on solid when headlights are on


I have had this happen and it is rare, but I have had a filiment burn out in a two filment buld and short to the other filiment. It does happen and I think this might be your problem, the only way to find it is a visual inspection of each bulb. I am sure many people will think this is crazy, but I have had the exact same problem, I had the schematics, tested the circuits,etc. and them by accident found a stop/blinker 1157 bulb that had done this exact thing. I hope this helps you, check the bulbs in your headlights also.

Dec 27, 2008 | 1999 Chrysler LHS

1 Answer

Right tail light not working when pressing brake w/ lights on.


There should be at least 2 bulbs in the light assembly. One light is the light that is on when you turn on your headlights with out the brake pressed, the other light only lights up while you press on the brake. Make sure you are replacing the correct bulb. You may have been replacing the bulb that stays on. Your lights may be set up to turn off the light that stays on when the headlights are on while pressing the brakes.

Nov 13, 2008 | 1993 Toyota Camry V6

3 Answers

Trailer wiring for 06 GMC Canyon 4x4


exactly what does it do? please explain what happens when you press the brake turn on the light than brake signals ect.....

Aug 13, 2008 | 2006 GMC Canyon

Not finding what you are looking for?
1995 Chevrolet Caprice Classic Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...