Question about Toyota Corolla

1 Answer

My fuel gange just stop woriking what can i do

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Hello,

Until you have your fuel gauge replaced, you can use a car computer such as the Scan Gauge II to remotely monitor your fuel levels through the car's OBD II port. A link is available below to the Scan Gauge home website.

http://www.scangauge.com/

Posted on Mar 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello gang,I'm having a problem identifying a rattling noise coming from my water pump area,it only happens after the engine is warm and I accelerate,and it doesn't stop until I stop pressing gas.


if water pump is external
take the drive belt off spin the water pump by hand
see if it rocks

if a serp belt pop off the serp belt
check all the tensioner pulleys and alternator the same way

if water pump is internal timing belt and water pump replaced at the same time

Sep 26, 2016 | Cars & Trucks

1 Answer

92 subaru loyale new distributor and coil still no spark


Had the exact same problem and went through the whole dance. Traced problem to relay under the dash , combination ignition/fuel pump relay. The relay was "clicking" but was internally bad, it would not engage circuit for the ignition. Power was indicated at coil and fuel pump would run but the circuit was not complete through the computer to power the ignition sensor in the distributor. I actually had to "gang" 2- 12 vdc coil automotive relays to replace the original relay. Caution... if you decide to gang 2 relays be sure to separate the two circuits, one relay for ignition, one for fuel pump and tie the coil wires together.

Feb 17, 2014 | 1992 Subaru Loyale

1 Answer

1989 crown victoria tail light just stop woriking


CHECK FOR THE BULBS PROBABLY YOU WILL HAVE A BRAKE LIGHT BULB WIRE BROKEN.JUST RENEW THE BULBS.

Aug 29, 2012 | 1989 Ford Crown Victoria

1 Answer

HEADLIGHTS,HORN,WIPERS,BLINKER,A/C BLOWER ALL STOPPED WORKING AT SAME TIME


There is a gang of fuses on top of the battery under a plastic cover. These burn out.... make up a jumper fused wire to the loom using parts from your FLAPS.

Even if the fuses look good your find the holder burnt in the plastic.

Jan 14, 2011 | 2004 Volkswagen Beetle

1 Answer

My passenger side window and both back windows won't roll down. Is it the motor...and how hard is that to replace myself?


Might sound dumb, but check the 'override' button on DRIVERS DOOR gang switch is not depressed, does what your problem suggests. Designed to stop the kids playing with elect windows if you don't want them to.

Oct 31, 2010 | 2003 Ford Windstar

1 Answer

Will turn over but not start put a new fuel pump in it if you poor gas in to the throttle body it will start for a min until gas runs out


I had the same problem with my old 1987 Chevy blazer s10. The problem was the ground wire of the fuel tank was rusty and it broke. So simple was the problem. But before that, I checked and change the fuses, the fuel filter, the oil pressure switch (this is related to the fuel pump to) and finely when a was ganging the fuel pump saw that the ground wire was broken or damage.


I hope this can help you.

Aug 29, 2010 | 1987 Chevrolet S-10 Pickup

1 Answer

Were is the fuel pump relay on a 90 s10 4.3


Driver side firewall left of Brake Booster. There are 2 relays ganged totogether. Inboard relay Fuel Pump Relay, outboard relay Air Cond. Relays secured with screw with a 7mm hex head.

Feb 19, 2010 | 1990 Chevrolet S 10 4WD

1 Answer

Engine sputters and backfires (no power) until it reaches 20 mph.


check if injector or carb is not over fueling or it could be starving fuel

Aug 08, 2009 | 2001 Chevrolet Silverado 2500HD

1 Answer

2000 5 series blower suddenly stop working.


You either have a fuse problem,wiring or the electric motor is faulty.

Jul 26, 2009 | 2000 BMW 3 Series

1 Answer

What is an ignation tune up for a 99 Merc. Gnd.


A full ignition tune up would be new spark plugs and wires.A cap and rotor if it has those. Do any fuel system cleaning before changing the plugs.

Jun 22, 2009 | 2001 Mercury Grand Marquis

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...