Question about 1994 Mitsubishi Eclipse

1 Answer

How do you repair spun bearings on a 1994 Mitsubishi eclipse Gst ?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 130 Answers

If the bearings or even one bearing has spun, the lower end of the motor needs new bearings and the crankshaft must be "turned" or resurfaced.. this requires pulling the engine... if you drive this vehicle in this condition, you will have catastropihic engine failure which would totally destroy the motor probably.. If you or someone has the expertise to remove the motor, putting in a "crank kit" is not difficult for anyone with a little mechanic experience.. but, basically, this is time to rebuild the motor whether you just do the crank kit or go ahead and go all the way with it since you already have it out and opened up...

Posted on Mar 25, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant find where the egr solenoid plugs in 95 mitsubishi eclipse gst trubo


egr transducer solenoid,,located at underhood, beside a/c idle up solenoid control, take alook at the vaccum hose at egr valve, its goes through the egr solenoid treansducer valve, picture later

Jun 25, 2010 | 1995 Mitsubishi Eclipse

2 Answers

How install the timming belt in my mitsubishi eclipse gst turbo 98


this link has a step-by-step DIY for changing the timing belt on your car. 2G TURBO TIMING BELT PROCEDURE

Jun 20, 2010 | 1998 Mitsubishi Eclipse

1 Answer

How can i tell if my turbo is bad on a 97 gst? are they hard to replace


You will feel a loss of power

Not too hard but time comsuming get a repair manual it will hep you.

If you have a boost guage your positive pressure boost will be lower than normal and the bearing may make a squealing sound if it's going bad.

Apr 02, 2010 | 1996 Mitsubishi Eclipse

1 Answer

ON MY 97 ECLIPSE GST WON'T


Is there oil in the turbo?

Feb 26, 2010 | 1997 Mitsubishi Eclipse

1 Answer

I need to know the location of the fuel filter on my 1996 mitsubishi eclipse


if it is a gst its under the battery on the fire wall some gs and rs models its on the tank

Oct 08, 2009 | 1996 Mitsubishi Eclipse

1 Answer

I need to know how to replace rod bearings in a 98 eclipse


Well, the answer is to unbolt the rod cap, install new bearings and retorque.

But I worry about this repair. The reason that the bearings failed must be resolved, before any repair is performed. This repair requires that the surfaces be true and that the clearance is correct at at least three places across the rod bearing surface.

You can measure with micrometers, but if you remove all oil, you can measure with a product called platicgauge.

Sep 16, 2009 | 1996 Mitsubishi Eclipse

1 Answer

Car idles high after its warmed up but when its not warmed up it idles really low and kinda lopes 1995 mitsubishi eclipse GST


you have to check on the fast idle control valve or pcv if it needs cleaning or replacement. Also check on vacuum leaks.

Jun 25, 2009 | 1995 Mitsubishi Eclipse

1 Answer

1994 NIMBUS knocking sound gets louder after engine starts


Sounds like you might have blown the motor, thrown rod, spun bearing, etc. Drive it by a local shop, for something like that, it should be a free second opinion of whether or not its repairable.

Jun 19, 2009 | Mitsubishi Minivan Cars & Trucks

1 Answer

1995 Mitsubishi Eclipse gst


probably just your fuse for your cluster, check that first if that doesnt work get a chiltons and trace the wiring, do you have power at the fuse?

Jul 24, 2008 | 1995 Mitsubishi Eclipse

Not finding what you are looking for?
1994 Mitsubishi Eclipse Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...