Question about 2005 Dodge Caravan
Well for starters I would re-check the codes and verify that all of the same codees returned. Also all of those codes have to do with ciruit malfunction. Because you have replaced the components then your situation is located in the wiring or possibly even the vehicles computer. Re-scan for whatever codes have returned and you will have to start tracing the wires from that component back to the computer. I dont have copies of the wiring diagrams but getting those will help greatly. Good Luck.
Posted on Mar 25, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 24, 2017 | Ford Cars & Trucks
Jan 01, 2016 | 1995 Jaguar XJ6
Jun 03, 2015 | Cars & Trucks
Nov 16, 2011 | 1995 Geo Prizm
Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back.
Inspect the EVAP system for cuts/holes in tubes/hoses
Inspect for damaged or disconnected hoses around the Evap purge solenoid
Check and/or replace the sensor
Check and/or replace the purge valve
Have a professional use a smoke machine to detect leaks
Aug 04, 2011 | Dodge Dakota Cars & Trucks
Dec 10, 2009 | 1997 Ford F150 Regular Cab
Aug 13, 2009 | 2004 Dodge Dakota
407 people viewed this question
Usually answered in minutes!