Question about 1994 Ford Econoline

1 Answer

Turn lights wont work - 1994 Ford Econoline

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 42 Answers

The indicators have a few components in their system, being: The indicator switch The Flasher Unit/Relay The fuse & wiring The bulbs The Hazard light switch.
If the hazard switch is broken or disconnected it will stop the indicators from working, so you could check that. You can check the indicator fuse, which should be labeled on the fuse cover. If it is blown, there is likely a fault that has caused it to blow, more often than not a problem with the trailer hitch or a trailer that has been towed. The next culprit is the flasher unit. They are usually found in the fuse area, it is a black box, looks much like a relay, but slightly taller. If this is faulty it will cause the indicators to either stay on without flashing, or not work at all. You can check this by disconnecting it, and connecting a test light to the terminals, one at a time while working the indicator stalk (key on) If the light lights up then this confirms the switch is okay, and the flasher is likely faulty.

Posted on Mar 25, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 cirrus and the brake light wont work as soon as u turn the lights on, ive replaced the bulbs


brake light wont work as soon as u turn the lights on,????? You mean when U step on the brake pedal or are U talking about someother light's

Sep 08, 2017 | Cars & Trucks

1 Answer

Both my low beam and high beam wont work. And my headlights wont go down even when lights are turned off and the button is unpressed on the inside.


check the headlight relays ,
Check for possible faulty light stalk switch also. Dash lights may fail with this possible cause.
Check fuses

Jan 25, 2016 | 1992 Mazda MX-5

1 Answer

1989 Honda accord tail lights wont work


Tail lights consist of running lights, brake lights, turn signals and backup lights (also tag light). Which of yours are not working?

Feb 01, 2015 | 1989 Honda Accord 4 Door

1 Answer

1998 honda civic lx dash lights wont turn on when i turn the key switch


I suggest you get one of those manuals people get nowadays to do it yourself..
My nephew use it to repair my car and it's totally repaired now.
you can get it from reliable-store or manualslife
also get instant help suggestions etc

Feb 12, 2018 | 1998 Honda Civic

1 Answer

2004 Grand Prix turning Signal lights wont work.


YOU HAVE TO REPLACE THE TURN SIGNAL SWITCH.BECAUSE WHEN IT GOES OUT.SOME TIMES YOUR DIMMER SWITCH STOP WORKING.IF YOU GOING TO FIX IT YOUR SELF BESURE TO.DISARM AIR BAGS FIRST.

Aug 19, 2009 | 2004 Pontiac Grand Prix

1 Answer

My 1995 pathfinder se brake lights and dashbord wont light up. the dashbord works but when you turn the lights on the dashboard wont and the brake lights wont work ether they dont turn on.


Check the wiring in the rear. If this has a tow package,the converter could be bad. If you have a daytime running light system the module could be bad. Also for good measure check the fuses under the hood & in the cab. You'll need a wiring diagram,test light,& multi-meter to go further.

Jun 28, 2009 | Nissan Pathfinder Cars & Trucks

1 Answer

94 cadillace when lights are turned on brake lights wont turn on


REPLACE THE MULTIFUNCTION SWITCH ON THE STEERING COLUMN, THIS IS THE ONLY PLACE THAT THE CIRCUIT CAN BE INTERRUPTED LIKE THIS.

Dec 14, 2008 | 1994 Cadillac DeVille

1 Answer

Brake lights wont turn on


check the turn signal switch

Aug 02, 2008 | 1997 Chevrolet K1500

Not finding what you are looking for?
1994 Ford Econoline Logo

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...