Question about Mercedes-Benz C-Class

1 Answer

I have a 2002 C240 4 door Mercedes. My remote key will not lock the doors. The only way to lock the car is to hit the manual while leaving the drivers door open and the drivers side passenger's door open. Then I have to manually lock the drivers door from the driver's passenger door and then close the driver's passenger door. This locks all 4 doors. I can open the door just fine with the remote key.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

Try the simple fix first......change the batteries.

Posted on Aug 01, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Replace Cabin Filter in my 2002 C240 Mercedes Benz

after changing air filter and spark plugs engine still shakes ???

Posted on Jun 19, 2008

chrischronic
  • 235 Answers

SOURCE: door ajar light stays on

go to your local parts store and buy a can of PB BLASTER lubricant then open each door and spray the latch assembley really good then close and open the door 10 to 15 times. do this with each door. the door ajar light switch is located in the door latch assembley and cannot be seen so soak the latch assembleys really good so lube reaches the switch. these switches sometimes get stuck but this usually frees up the switch

Posted on Mar 25, 2009

  • 160 Answers

SOURCE: 2002 Sienna passenger side power

SHOULD YOU GET A 2-2 CODE YOU WILL NEED A SLIDING DOOR ECU

Posted on Apr 19, 2009

lastech
  • 408 Answers

SOURCE: PASSENGER REAR DOOR WILL NOT SHUT STUCK OPEN?

hello,seems your door brake is stuck-up,remove your door siding,then put some grease or replace your door brake,ty

Posted on Apr 27, 2009

  • 234 Answers

SOURCE: Drivers Door Lock Problem

You will probably need to replace the power door lock actuator.

Here's a link to one similar to yours.

http://autorepair.about.com/library/a/1g/bl467g.htm

You can probably get a used one from a salvage yard.

Try this site to find one near you:
http://car-part.com

If you need more help post a comment.

Tim

Posted on May 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mercedes door lock


THAT IS NORMAL OPERATION. IT PREVENTS YOU LOCKING YOUR KEYS IN THE VEHICLE. GO GET A NEW WATCH BATTERY FOR THE REMOTE AT THE DRUGSTORE.

Oct 01, 2013 | Mercedes-Benz R350 Cars & Trucks

1 Answer

FUSE DIAGRAM S600 2002 S600 MERCEDES


i HAVE PROBLEM WITH DOOR LOCK COULD IT BE THE PUMP.LOCKS .WHEN I PRESS THE REMOTE KEY THE LIGHTS ON MIRROR FLASH INDICATING THAT THE REMOTE IS WORKING. COULD IT BE A FUSE IS SO WHERE IS FUSE LOCATED OR IS IT DOOR PUMP AND WHERE IS THAT LOCATED

Aug 16, 2012 | 2002 Mercedes-Benz S-Class

1 Answer

Lost original car alarm control... need to reset a new one...



programing a Nissan remote , is hidden secret by Nissan Dealers. As a Nissan Technician i will share it.

Just get in your vech , close all doors. Using your power lock switch , lock all doors. After doors are locked take your Ignition Key and insert it and remove it from ignition switch in a slow fashion , but consitant pace. (97 and earlyer are fast) When you see the hazzard lights flash, put key in ignition switch and turn to the On postion .. Do NOT CRANK or you will have to Start over .. After in the On postion .. Hit the Lock button on remote... Hazzard lights should flash..( note..you have to reprogram all remotes when adding a new one , if you don't your old remotes will not work ) If your doing just the one , turn igntion switch off and unlock door and get out and try it. If you are doing more than one. While still in Vech with Key on . After you hit the Lock button on Remote and hazzard light flashed .. with key still on .. use master lock switch unlock doors and relock and then hit Second Remote, Lights should flash again , repeat if adding a 3rd remote.. after done just turn key off and unlock door and get out and try.

Oct 29, 2009 | 2002 Volvo S40

1 Answer

Door Lock Malfunctioning


power door lock solenoid may need replacement

Jul 04, 2009 | 2007 Mercedes-Benz C230 Sedan

1 Answer

2003 Mercedes E32O with a machine gun door lock


you have to replace door lock completely , there is small plastic gear on electric motor which moves locking mechanism and seems that gear is broken, but it is not available as separate part.

Jun 04, 2009 | 2003 Mercedes-Benz E-Class

1 Answer

I do I reset the alarm/door locking system


there could be a problem with the actual remote, get it checked, if you do need a remote plz get it from a mercedes main dealer.

Feb 17, 2009 | 2007 Mercedes-Benz ML320 CDI

4 Answers

Program a remote key for 03 A6


I have an A4 and did this to re-program my key:

1. used the key to start the car...then turned it off
2. put the key in the driver door (door closed)
3. pressed the lock button on the key fob once
4. turned the key to lock the door.

This is basically the steps in the owners manual, but the car must be started with the key first, and the key must be in the door lock before pressing the lock button.

Dec 10, 2008 | 2003 Audi A6

3 Answers

Program remote control for mazda mpv 2002


Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Dec 06, 2008 | 2000 Mazda MPV

1 Answer

We have a 2007 Entourage and you cannot lock it with the car running. We installed a remote starter and it will not lock the doors when it is remotely started. Can this feature be disabled?


i think that this is to prevent you from locking your keys in the car with the engine running.
Some remote starters have a feature that when the car is running (and in park) you can hit the remote start button twice for one second each - then you can take the key out of the ignition and still have the car running.
At this point....if you would hit the 'lock' button on your door the doors would immediately unlock. However, if you get out of the car and close the door leaving it unlocked and then you hit the 'lock' on your original car remote the doors will lock and stay locked. So now the car is running the doors are locked and you have the keys in your hands. Then you can run into the store or house real quick with your car locked.
Once you come back, you hit 'unlock' on the original car remote. the doors will unlock - you can get it - and then before hitting the brake put the key in the ignition and turn it (dont crank it) as if you had when originally using the remote starter.
Maybe this will work for you.....

Oct 14, 2008 | 2007 Hyundai Entourage Limited Minivan

2 Answers

Keyless entry remote


Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks.

Jun 20, 2008 | 2002 Mazda Protege

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...