Question about Hyundai Sonata

1 Answer

Need picture of throttle positioning sensor and idle air control valve

Posted by on

  • Steve Allison
    Steve Allison Mar 24, 2011

    For ~$25 US, you can own a Haynes service manual unless you have a very rare model. These are available at auto parts stores or someone may have donated one to your local library.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

First of all, you haven't SPECIFIED the MY (model/year) Hyundai Vehicle????
Think that might be useful?... I mean, we can't respond to your question unless WE know WHICH vehicle YOU'RE talking about... Ya Think?

Otherwise, go to www.hmaservice.com and register you vehicle by VIN #... that way, you'll have ALL the info you want regarding your vehicle (i.e., Techincal Service Bulletins, Shop Manuals, Wiring Diagrams, etc.). Best answer I can give you at this time.

Hope this helps

Posted on Mar 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my 94 Cherokee laredo idle high?


Vacuum leak, idle air control motor and solenoid, stuck throttle cable if equipped, throttle position sensor

Oct 02, 2016 | Cars & Trucks

1 Answer

My 96 nissan altima dies at idle


Could be a dirty throttle body, vac leak, or a defective idle air control valve. The computer adjusts idle speed by controlling the amount of air entering the throttle body via the control valve.
Is the check engine light on ?

Dec 24, 2012 | 1996 Nissan Altima

2 Answers

Where is throttle positioning sensor on a suzuki forenza


Removal & Installation
  1. Disconnect the negative battery cable.
  2. Disconnect the Intake Air Temperature (IAT) sensor connector.
  3. Disconnect the breather hose from the valve cover.
  4. Remove the air intake tube.
  5. Disconnect the throttle cables by opening the throttle and moving the cable through the release slot.
  6. Disconnect the vacuum hoses from the throttle body.
  7. Disconnect the Throttle Position (TP) sensor and the idle air control valve connectors.
  8. Disconnect the coolant hoses from the throttle body.
  9. Remove the throttle body and discard the gasket.
  10. Remove the TP sensor.
  11. Remove the Idle Air Control (IAC) valve.
  12. Remove the throttle body retaining nuts.
  13. Remove the throttle body.

To install:

  1. Install the throttle body.
  2. Connect the TP sensor connector and the IAC valve connector.
  3. Connect the coolant hoses to the throttle body.
  4. Connect the vacuum hoses to the throttle body.
  5. Connect the throttle cable.
  6. Install the air intake tube.
  7. Connect the breather hose to the valve cover.
  8. Connect the IAT sensor connector.
  9. Connect the negative battery cable.
  10. Fill the cooling system
  11. shinehutt_33.gif
  12. i hope this helps tps is attatched to hrottle body on other side than throttle cable
  13. plz dont forget to vote rep[ly if you need more help

Jan 17, 2011 | 2006 Suzuki Forenza

2 Answers

Do you have a picture to show where the throttle postion sensor should go?



Throttle Position Sensor Removal & Installation The throttle position sensor is an integral part of the Throttle Body and is only serviced as a complete unit.

Oct 14, 2010 | 2003 Cadillac CTS

2 Answers

On a 3.5 engine code reads low idle? any idea


LOW IDLE CAN BE CAUSED BY MANY THINGS.CLOGGED AIR FILTER. LOW COMPRESSION OR MISFIRE CONDITION.IDLE AIR INLET PASSAGE OR THROTTLE BORE IS DIRTY OR FULL OF DEPOSITS.IDLE AIR CONTROL VALVE FAILED.MASS AIR FLOW SENSOR COULD BE OUT OF CALIBRATION. THROTTLE PLATE THROTTLE SHAFT OR LINKAGE IS DAMAGED OR STICKING.PROBABLY HAVE REMOVE THROTTLE BODY ASSEMBLY REMOVE IDLE AIR CONTROL VALVE AND THROTTLE POSITION SENSOR.BUY CAN OF CARBURETOR OR THROTTLE BODY CLEANER SPRAY CLEAN ALL CARBON BUILT UP AROUND THROTTLE PLATES AND BORE.LET AIR DRY BUY A NEW THROTTLE BODY GASKET.

Jul 05, 2010 | Chevrolet Colorado Cars & Trucks

2 Answers

97 malibu wont idle/replaced sparkplugs 2-idle ssensors had coil pack checked out,ok/still wont idle whats up please?


The throttle position sensor,and the idle air control valve would be my guess at this point.Ohm out the throttle position sensor,to see if it has a dead spot,if so,replace it,if not,replace the idle air control.

Nov 13, 2009 | 1997 Chevrolet Malibu

2 Answers

Jaguar xj6 4.0 1990. showing fault code fuel 14, fail 14. what does this code mean ?


2 airflow sensor out of operating range 3 coolant temp sensor out of operating range 4 oxy sensor indicates full rich 5 throttle potentiometer/airflow sensor... (low throttle pot signal with high airflow sensor signal) 6 throttle pot/airflow sensor...... (high throttle pot signal with low airflow sensor signal) 7 throttle pot...idle fuel adjustment failure(idle speed??) 8 intake air temp sensor...open or shorted circuit to sensor 11 Throttle pot at idle: Throttle pot idle trim out of normal range 12 Airflow meter: MAF signal out of range 14 Coolant thermistor: Resistance out of range or static during engine warm up 16 Air thermistor: Resistance out of range 17 Throttle pot: Out of range 18 Throttle pot/Airflow: Low throttle pot signal at high airflow 19 Throttle pot/Airflow: High throttle pot signal at low airflow 22 Fuel pump drive: ECU output to fuel pump relay 23 Fuel supply: Engine running too rich 24 Ignition Drive: ECU output to ignition Amp 26 Air leak: Engine running too lean 29 ECU self check 33 Injector Drive: ECU output to injectors 34 Injector: Looks for Injector dribble 37 EGR Drive: ECU output to EGR switching valve 39 EGR check sensor: EGR not working (normally pipe blocked) 44 Lambda (O2) sensor: Poor mixture control rich or weak (or misfire) 46 Idle speed Control valve: ECU output to Coil AB 47 Idle speed Control valve: ECU output to Coil CD 48 Idle Speed Control Valve: Stepper motor grossly out of position 66 Air pump: ECU output to air pump relay 68 Road speed sensor: Seen speed < 5km/h at high engine airflow 69 Drive/Neutral switch: Seen cranking in "D" or high airflow in "N" 89 Purge Valve drive: ECU output to purge valve
this is all I could find

Nov 09, 2009 | 1990 Jaguar XJ6

1 Answer

I have replaced the throttle position sensor, egr valve, o2 sensors, mass air flow sensor, fuel system, and my 99 trooper idles high, and shuts off


Check the Idle accelerator valve located on front side of throttle body, it is either stuck or needs cleaning real bad, this is what controls your idle speed, by letting small amount of air in. It has a plunger on it that moves back and forth slowly to adjust amount of air mixture, it is controlled by computer. Unplug it and just turn on key and check for voltage.This valve gets real gummed up, probably need to take apart throttle body and clean. HUNT

Jul 12, 2009 | 1987 Isuzu Trooper

2 Answers

Nissan Quest 2001 turns off when idle


Idle air control at base of throttle body. Passages could be plugged or idle hard stop needs adjusting.

Air Intake System Sensors Air intake system sensors include a heated resistor-type mass air flow (MAF) sensor and throttle position (TP) sensor; both supply data to the powertrain control module (PCM). The PCM also monitors engine speed.
Air Intake System Control Devices The idle air control (IAC) solenoid regulates idle speed by adjusting the amount of air allowed into the intake manifold. Adjustment is made by varying the duty cycle output by the powertrain control module (PCM). The PCM will increase the duty cycle for added mechanical or electrical loads. The IAC solenoid is combined with the fast idle control (FIC) solenoid which is turned on when the air conditioner is engaged to help compensate for the additional load. The IAC valve must be replaced as an assembly with the FIC solenoid.
Fast Idle Control (FIC) Solenoid The fast idle control (FIC) solenoid (Figure 1) compensates for idle speed change caused by the operation of the air conditioner compressor. The FIC solenoid is controlled by the FIC relay. The FIC relay is energized when the air conditioner clutch is energized and the relay allows the FIC solenoid to turn on and let an additional volume of air into the intake manifold.
Figure 1: Fast Idle Control (FIC) Solenoid
53edf6d.gif
47fb9be.gif ------------------------------------------------------
Throttle Body (TB) The throttle body (TB) controls the amount of air that flows into the engine through a single butterfly valve. The single butterfly valve opening is determined by the accelerator pedal. The TB is cast with an air bypass channel and houses several emission-related components for the powertrain control module (PCM).
--------------------------------------------------------
Throttle Position Sensor (TP Sensor) The throttle position (TP) sensor responds to the accelerator pedal movement. The TP sensor is a potentiometer that transforms the throttle plate opening angle into output voltage and sends the voltage signal to the powertrain control module (PCM). In addition, the sensor detects the opening and closing speed of the throttle plate and sends the voltage signal to the PCM. Also, the TP sensor is used to determine the air intake when the mass air flow (MAF) sensor fails. This mode of operation is called Fail Safe.
The TP sensor integrates the idle (IDL) switch within the housing. The IDL switch detects when the throttle plate is closed and an idle condition occurs. The PCM is supplied with this input signal.

IDLE SPEED

6bee6c3.gif

Apr 03, 2009 | 2001 Nissan Quest

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...