Question about 2000 Jeep Grand Cherokee

2 Answers

What does it mean when a 2000 Jeep Cherokee V8 just stop working without any warning?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 638 Answers

It could be several things, 1. it could be the fuel pump and filter, which is located inside of the gas tank. 2. it could be a fuel pump relay, that went bad, this is located in a black box, on the drivers side, along with other relays , and fuses, check the fuel pump relay, and the start relay. hopefully 1 of these is the problem, i suspect that the jeep was running fine before it stopped, if so, i would still check the items , that i have mentioned, good luck, and hope that this information has helped you. p.s. in order to see if the fuel pump is working, remove the gas cap from where you put gas into, and hold your ear close to the gas tank opening, then , have someone turn the ignition key on, but do not start the vehichle, while the key is on, listen to see if you hear a hummimg sound , coming from the gas tank, if so, the pump is workimg, if no sound, i would suspect the fuel pump.

Posted on Mar 24, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 255 Answers

That means that your engine is going to get sealed and you need to get it serviced as soon as possible.

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is a 1995 jeep grand cherokee limited v8 vs. inline 6 transmission interchangeable?


No sir they will not interchange. i worked at a transmission shop for 7 years. the inline 6 has a 500 trans in it and the v8 has a 518 trans in it. the bellhousings are different.

Jan 03, 2014 | 1995 Jeep Grand Cherokee

1 Answer

Quadra


you have low fule pump pressure change the pump

May 03, 2013 | 2000 Jeep Grand Cherokee

2 Answers

Can u replace the head gaskets on a 2000 Jeep Grand Cherokee 4.7 liter V8 without dropping the engine?


ruacowboysfa, Yes, you can do this without dropping the engine. The only problem you may have is removing and retorquing the head bolts because of the room constraints at the back of the engine compartment. Good luck with this.

May 12, 2011 | 2000 Jeep Grand Cherokee

1 Answer

What's the meaning of (Manutenz Routinaria)


Just is the "warning" that advice to you that its time for Tune-Up and replacement for filters and fluids.

Additional details could find in the owners and repair manual: ZJ Jeep Grand Cherokee

Hope helps.

P.S. Nice SUV, I have the '93 Limited GC (5.2L V8).

Nov 23, 2010 | 1994 Jeep Grand Cherokee

1 Answer

I'm trying to locate the thermostat on my 2000 jeep grand cherokee


  1. On 2000 Jeep Grand Cherokee 4.7L V8
  2. Remove lower radiator hose clamp and lower radiator hose at thermostat housing.
  3. Remove thermostat housing mounting bolts, thermostat housing and thermostat.

2000 Jeep Grand Cherokee 4.0l v6
Note:on the In-line 6 4.0L model the thermostat housing is mounted at the top of the engine block next to the water pump.

Nov 14, 2010 | 2000 Jeep Grand Cherokee

1 Answer

2000 Jeep Grand Cherokee, 4.7 V8: Has dual


hi
there is no recall from jeep (there should be) your blend doors are damaged or broken. jeep will quote you around £800 to fix. log on to heatertreater.net they have a diy quick fix that will last the life of jeep. you can install the new blend doors that are metel (not stupid plastic ones jeep use) in around half an hour, this really does work as i have installed a few of these kits with no problems.
hope this helps

Oct 19, 2009 | 2000 Jeep Grand Cherokee

1 Answer

I'm receiving a check gauges warning light on my 00 Jeep Grn Cher


This might be a result of an oxygen sensor. If you take the vehicle to a store like autozone, they will attach a diagnostic sensor to your vehicle at no charge, and then reset the unit, and be able to tell you what is going on. This is at no charge, so there is nothing to lose. I hope this helps.

Aug 05, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Noise from front


Is it full time or part time 4 wheel drive? You should check the front driveshaft u-joints.

Apr 05, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...