Question about 1997 Chevrolet Camaro

1 Answer

How to disable kill switch on a 97 camaro? - 1997 Chevrolet Camaro

Posted by on

  • jon2328 Mar 24, 2011

    This is an ignition kill switch. Sometimes I disarm the alarm and the ignition kill switch will still not allowing me to start for mins or hours. Is there a way to disarm this kill switch without cutting wires? possibly with the car radio in the car??Anyone please???

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,763 Answers

This all depends on what kind of kill switch, most kill switches operate by cutting a wire and running it through a switch, so locate the switch and remove the wires and connect them together, there should be a wire on each end of the switch, like a light switch, the switch connects them or disconnects them, so you will connect them,

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where and how do I disable the kill switch on a 2006 chevy impala?


Kill switch ? There is no kill switch on you Chevy > Now what seams to be the problem ? No start , the engine doesn't turn over ?

Dec 02, 2015 | Cars & Trucks

1 Answer

1995 Chevrolet Camaro Security Light


You may need to reset your kill switch

Apr 01, 2012 | 1995 Chevrolet Camaro

1 Answer

I have a 1995 camaro, 3.4 liter, 175,000 miles on it. I just bought it a month ago. I have a brand new ignition & a new key with a chip in it. It was running good until the other day, I drove it to...


Jump the vehicle, if it starts then the problem is a dead cell in the battery if it doesn't there is a problem in the vehicle security system. If you have an after market alarm installed you can disconnect the power wire to that alarm and that will disable the starter kill switch and allow the vehicle to start.

Mar 02, 2011 | 1995 Chevrolet Camaro

1 Answer

Diagram for 97 camaro ignition switch


Hello,
my 97 LT1 chevy camaro is giving me ignition problems.
I changed the relay box and now cannot turn the key. It's like there is no thread. ?.. someone please help

Sep 09, 2010 | Chevrolet Camaro Cars & Trucks

1 Answer

97 V6 Camaro, sometimes it won't start (the engine does turn), after a couple of minutes (turn the key till car stops dinging) then it starts. However, now it is stalling when I make a normal stop (on...


Try replacing the oil sending unit, Some years had a fuel pump shut of built in to the switch so if the oil pressure went down it would kill fuel pump to stop engine damage. Yours may be faulty

May 24, 2017 | 1996 Chevrolet Camaro

1 Answer

How can I by pass a chevy camaro security system, beacause car wont start


Pull the in line fuse out of the Power wire on the alarm. Is the fastest way to disable the kill switch.

Jun 18, 2010 | 2002 Chevrolet Camaro

1 Answer

Unable to disable my security system/alarm on my 95 Chev. Camero


yes, do some internet searching, I believe there is a control that you unplug inside the hatch on the left hand side, remove the inside plastic panel, undo the connection, wait 5 minutes then reconnect. This I have done once along time ago on a 94 model. Remember I am only here to help and wish this works for you. Good luck.

Dec 16, 2009 | 1995 Chevrolet Camaro

1 Answer

97 camaro wont start no lites on dash head lites


hi check the batt first to make sure it is charged. second check your ground cable. and third check the main ignition fuse under the hood. it will be a very high amp fuse.

Apr 21, 2009 | 1997 Chevrolet Camaro

Not finding what you are looking for?
1997 Chevrolet Camaro Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...