Question about 2005 Chevrolet TrailBlazer

1 Answer

Ck engine light come on had it ck show code 128

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,959 Answers

P0128 is a temperature error code indicating: ECT Sensor Below Thermostat Regulating Temperature

Possible causes are:

  1. Check the operation of the thermostat (it may be stuck open)
  2. Coolant level is too low, or the coolant mixture is incorrect
  3. ECT sensor signal circuit has a high resistance condition
  4. ECT sensor is damaged or it has failed
In most cases, assuming the coolant level is full, changing the thermostat will correct your problem.
Thank you for using Fixya!

Posted on Mar 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 GMC yukon 5.3 engine flex fuel no ck engine light on, yet when they go to inspect it it shows 3 inc codes. what can cause this?


3 inc codes ??? 3 incompleat code's.? Not code's - Readiness monitors .
OBD2 Car Diagnostics Blog
Your best bet , take it to a qualified repair shop.

Apr 23, 2018 | GMC Yukon Cars & Trucks

2 Answers

P0410


Take it to a qualified repair shop an have it diagnosed properly !

Dec 02, 2017 | Buick Cars & Trucks

1 Answer

Maintenance Code 128


Put your vehicle & OBD2 Code 128 into google

We don't have manufacture codes

Nov 19, 2012 | 2006 Isuzu Ascender

1 Answer

CK Engine Light came on, (2006 Dodge Sprinter - 2500), mechanic found P2088 and replaced sensor. Ran check again found P 2032-02 sensor plausibility. They say oil contaminated in air charge tubes. The CK...


P2088 Dodge ,That is a cam position actuator, Not a cam sensor, Cam actuator control the cam angle, If this is ****** or advanced you'll definetly get CK ENG LT 2032, 2032 is reporting the engine condition and CK engine light is on due to a logic check, The function check has been suspended and the ECM is reporting the logic which is the condition of the vehicle, The first code was correct, P2088 that is a function failure. If there is acces to a freeze frame it will show at what MPH the vehicle was going if it is less than 40mph you can be sure the cam actuator is not advancing. Leave 2032 alone trouble shoot P2088 that is the source

Apr 25, 2011 | Dodge Sprinter Cars & Trucks

1 Answer

My check engine light came on my 2007 Sante Fe, not sure why engine seems to be running fine. I keep reading about codes is that something that has to be read by a mechanic or can I find this code?


Some ck engine lights come on after 100,000 miles or so. When you take it to the shop they ck engine and reset the engine light indicator. Just a safety feature.

Sep 13, 2010 | 2007 Hyundai Santa Fe Limited

1 Answer

Chevy trailblazer check engine light


P0128 is coolant operating temperature operating too low. This can be contributed to the Thermostat stuck open or faulty electronic radiator fan clutch. This is common, I had the same issue and replaced the thermostat and fan clutch and had the clutch re-programmed (required) at the dealer. As for the P0410, check the air pump fuse, if blown it will set this code on. Also check the air pump hoses for water and cracks. Hopefully this helps!!

Apr 20, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

I have a 2006 trailblazer engine light on when started runs for about 3 sec. then cuts off.


First of all, what cuts out, the "check engine" light, or the engine itself? If its the ck eng light it sounds like an intermittin problem that in most cases cannot be resolved with a code scanner. Have you disconnected the battery to reset that light? If not, then do so (usually the ground cable) for about 10 min., then re-connect the cable and your ck eng. light will be off. ck eng. lights generally have to be constantly on in order to pull codes from the PCM. If there is a problem then the light will come back on.

Mar 31, 2010 | 2005 Chevrolet TrailBlazer

1 Answer

2003 town&country ck eng light on


p0455 is for evap leaks check hose on the passenger side by the fender under the hood a hose coming from the engine to the purge control valve one of the rubber hose is probably broken

Sep 23, 2009 | 2003 Chrysler Town & Country

Not finding what you are looking for?
2005 Chevrolet TrailBlazer Logo

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

81342 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...