Question about 2006 Toyota 4Runner

2 Answers

The "maint" light is on , how can I to turn it

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,400 Answers

You need an OBII scanner to reset service light...BUT.. any good parts store can do it for you for FREE (Autozone, Advance, etc..)

Posted on Mar 24, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 693 Answers

Reset your ECM, do this by turning your key to on position then turn on a/c next disconnect your positive battery terminal. Wait 30 sec. the thurn key switch off, then replace battery terminal. This will reset your ecm and clear any codes , Note if they is a problem the lite will come back on. Good luck to ya.

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn light will not turn off, not blinking, When turn on signal or 4 way flashers goes off for a few seconds then comes back on


2006-2015 Toyota Highlander MAINT REQD Light Reset

seventrumpet.com/2006-2015-toyota-highlander-maint-reqd-light-reset/
Mar 15, 2015 - How to MAINT REQD Light Reset on Toyota Highlander 2006, 2007, ...Turn the ignition switch to the "On" position, but do not start the engine ... This procedure should applies to the second and third generation of the Toyota Highlander (2005, 2006, 2007, 2008, ... Your email address will not be published.

Oct 12, 2015 | 2005 Toyota Highlander

1 Answer

My 4 runner displays shows maint. what can i do to solve this problem? v6 2003 engine 20LB i bought it with this problem one week nothing,i want to change oil motor and filter,air filter...but i dont...


The "MAINTANENCE" light on the dash is nothing more than a timer of sorts, every 5000 miles to be precise. Whenever you bring your Toyota in for a service, one of the last things they do is reset the MAINT light. There's a sequence to doing this yourself:

With the car key on ACC, set your odometer on mileage(not trip a or b) then turn ket off. then hold they button that switchs from odo and trip, then turn the key back to acc. while you are holding it down you will notice the maintenance light blink and go out. and then you are done.

Sep 07, 2011 | 2003 Toyota 4Runner

2 Answers

I has toyota Tacoma 2006 4x4 , the problem my truck is the light maint req shown up , in the manual book say oil change , i did but that light still there , Can you give me the tip for that , i 'm...


1) Turn your key to the on position (dash lights will come on)
2) Push the odometer button until the total miles are displayed and keep holding it.
3) Turn the key Off, and then back ON while holding the odometer button in.Don't let up on the button. You will notice the odometer reading shows dashes and they will sequence off. After they sequence off, the Maint Reqd light will go off. Release the odometer button

Mar 05, 2011 | 2006 Toyota Tacoma

1 Answer

How to reset the "maint req'd" light after oil


LET ME GET BACK TO YOU HAVE TO STEP OUT FOR SHORT WHILE.

Jan 31, 2011 | 2007 Toyota Camry

1 Answer

How to turn off oil change light\r\nfor nissan


Nissan/Infiniti
Owners of many late-model Nissan and Infiniti vehicles have the unique privilege of actually setting the interval at which they would like to be alerted about changing oil. To do so:
1. Push the "MAINT" button on the main menu.
2. Select "Engine Oil" and push Enter.
3. Select "Maintenance Schedule" and push joystick right or left to select desired mileage.
4. To reset maintenance interval, select "Reset" and push Enter.
To reset the maintenance reminder, follow this procedure:
1. Push the "MAINT" button for more than 1.5 seconds.

Jun 05, 2010 | 2006 Nissan Murano

1 Answer

Had 1st oil change on 08 4Runner @ 4980 miles. "Maint" light came on at 5000 miles indicating oil needs changed. How do I turn it off?


If you have your owners manual, should be a section in there on resetting the light. You may also want to try this method... With the ignition off press and hold the button for the trip meter reset, while still holding this, turn the ignition to the on position (don't start vehicle), you should see either the maint light start flashing (if this is what happens then it should go off after flashing a few times, then you can release button and start vehicle) or there should be a few lines where the mileage shows up, these lines will flash and start to countdown and disappear, then it should show "oil life 100%". Hope this helps

Jul 17, 2009 | 2003 GMC Envoy

2 Answers

Why does the "Maint Reqd" light turn on in a 2009 Toyota Matrix?


you need to hold down the reset button with one hand while you turn the key on, you will see the 5 lines count down

May 01, 2009 | Toyota Matrix Cars & Trucks

1 Answer

The maint light is on I have a 2004 toyota 4 runner sport


This is basically your change oil light. When you have your oil change done, the shop should have reset the light for you.
To reset the light, try doing this:
Turn the ignition on
Make sure the odometer displays "ODO"
1.Turn the key off
2.Press and hold down the same button you use to get to "ODO"
3.Turn the key back to ON ( while still holding down the button)
4.Hold the button in until all the flashing lines on the odometer go away and the bunch of "000000" shows up and the maint reset light will turn off.
Your'e done.

If this doesn't work, you would have to try it on "trip A" instead of "ODO".

Apr 09, 2009 | 2004 Toyota 4Runner

2 Answers

I have a toyota 4-runner and my maint light is on Does this mean I need service


most likely requires a service make sure engine oil/air/fuel filters are changed when beeing serviced check charging rate,aux belts etc reset light

Feb 19, 2009 | 2008 Toyota 4Runner

Not finding what you are looking for?
2006 Toyota 4Runner Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...