Question about 1997 Chrysler Concorde

1 Answer

1997 chry. concorde po403 - 1997 Chrysler Concorde

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 8,215 Answers

Hi, your computer is having trouble sensing current in the EGR solenoid circuit. Check the wiring and connector to the solenoid. The solenoid is sitting on top of the flow transducer as shown in the diagram below. Sometimes the wiring comes loose from it's harness and touches a hot manifold. If the wiring looks good, remove the connector, turn the key on, and check for power at the connector using a 12 volt test light. There should be 12 volts on the light green wire with a black stripe. The other wire (pink with a black stripe), is the computer control and current sense wire. If the voltage there is good, you might try jumping power from the battery to the solenoid to see if it will click. If it will not click, replace the solenoid. Please let me know if you have any questions, and thanks for using FixYa.

1997 chry. concorde po403 - jturcotte_1304.gif


jturcotte_1305.gif


jturcotte_1306.gif

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Were is fuse m1 fuse b for chry 99 concord lxi


hmm depending on this car's maker it should be around the driver side door area or under the hood of the car if not it maybe under the driver side steering area

Feb 23, 2017 | Cars & Trucks

1 Answer

Need to know what these codes are for I have a 2004 L300 Saturn PO403 and PO727


P0403 is EGR (exhaust gas recirculation) circuit malfunction
P0727 is Engine Speed Input Circuit No Signal
http://www.check-engine-light.com/trouble-codes

Apr 15, 2015 | 2004 Saturn L300

1 Answer

Will a 1991 Dodge Caravan transmission fit a 1997 Plymouth Grand Voyager?


Have to check the unit model in each vehicle
The 1991 is an OBD1 & the 1997 is OBD2 --so
it won't work if it does match up mechanically
Do yourself a big favor & get rid of any chry van
I once owned a tran shop & 50% of my work was from
1990's caravans,bad unit,don't last

Aug 08, 2013 | Cars & Trucks

1 Answer

Code p0700 what could be the defects


Use Google
Put in your vehicle & the codes
2003 chry concorde OBD PO700
Need a transmission shop

Jul 24, 2013 | 2003 Chrysler Concorde

1 Answer

1997 Chrysler Concorde LXI. Radio works its just


Try disconnecting the battery for five minutes and then reconnect. This may reset the memory in the radio.

Sep 16, 2010 | 1997 Chrysler Concorde

1 Answer

You guys have been great with all the help but now I have a big problem. I changed the water pump and everything went back together perfectly. Now the car wont start. It cranks and lets out a little...


Although it didn't turn on the cam pulleys it probably turned on the crank pulley, how did you loosen belt? There are timing marks for reference

Jun 23, 2010 | 1994 Chrysler Concorde

1 Answer

Where is the water pump located on a 1997 chrysler concord


If it's a 3.5, it's behind the timing cover. If it's a 3.3, it's on the lower driver's side. It has a smooth wheel on it. Hope this helps. PHil

Jan 11, 2009 | 1997 Chrysler Concorde

1 Answer

1997 chrysler concord


My girlfriend's 95 concorde was having a problem that sounds like that. Some times when she started the car, the heater control console would not turn on but the heater would turn on full blast. I fixed it by replacing the control console with one that i picked up from the junk yard. Hope this helps you

Oct 21, 2008 | 1994 Chrysler Concorde

Not finding what you are looking for?
1997 Chrysler Concorde Logo

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...