Question about 2008 Jeep Liberty

1 Answer

Blinkers,hazzard lights,tail and brake lights ,dash lights ,i put foot on brake and you can see the left blinker light flash on when I step on brake but the fuse is already blown ,and it seems when I use the left blinker it blows the fuse when the right blinker dont ,i have a trailerhitch could that bthe problem? My car is a 2008 jeep liberty. Please help!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 42 Answers

It does sound as though the trailer connection is the source of the problem, check to see if the wiring has been resting on the exhaust pipe and melted through, shorting the wires. Also check if it is squashed or damaged anywhere. Failing this you may have to pull the trailer connector apart and see if the wires have come out inside and are touching, this can happen if the trailer connector is pulled hard.

Posted on Mar 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

1 Answer

No hazzards or blinkers on dash or lights


Check the flasher can, this may be faulty as it works the blinkers and hazard lights.

Feb 05, 2012 | 1995 Dodge Ram

1 Answer

When i push the brakes the dash lights up and when i put the right or left blinkers the dash lights ups. what do i do?


Hi, is it possible you have the wrong lamps in the brake light sockets? It seems like the brake/turn lamps are shorting across to the tail lamps, which will the power the dash lights. The stop/turn lamps are supposed to be dual filament bulbs. If you put a single filament bulb in the socket, it may short across the stop and tail circuits.

Jan 25, 2011 | 1991 Chevrolet S-10

1 Answer

Blinkers dont work properly


start by looking for a bad ground to one of the light sockets

Jul 23, 2010 | 1997 Oldsmobile Cutlass Supreme

3 Answers

Have a Chevy Corsica 1996. Blinkers not working right. When I step on brake the arrow on instrument panel for the right blinker lights up. When use left blinker, both flash like the flashers are on. ...


It sounds like a bad light socket. The brake light and the parking/running/regular part of the socket are shorting out. When you press on the brake petal it's shorting out on the turn signal and sending current to the indicator (arrow) on the dash.. When you use the blinker, it's shorting with the brake light and causing them both to flash...

Check the socket and get back to me with the result.

Mar 14, 2010 | Chevrolet Corsica Cars & Trucks

3 Answers

No dashboard lights or tail lights but I got Blinkers and brakes


most like u have a blown fuse most of the time in cars they connect the tail light and instrament lights to 1 fuse

Sep 18, 2009 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

My brake lights are not working. the bulbs are good. the tail lights, blinkers, & hazzards all work. Any suggestions???


It could be the brake light switch above the brake pedal. Maybe this switch is bad. Just another thing you might want to check.

Jun 23, 2009 | 1999 Nissan Quest

3 Answers

Tail lights but no blinkers or brake lights


there are two turn signal flashers under dash one on fuse box and one next to the light switch have to look up behind dash behind light switch for second I had same problem

Mar 14, 2009 | 1985 Jeep CJ7

1 Answer

Blinkers


If you can turn the blinker on left or right and the light comes on but doesn't blink......Open the drivers door, there is a fuse box, On the side of the dash.. The relay willl be a small silver canister looking relay in with the fuses.. put your finger on it and turn the blinker on.. you should feel and hear a click...( With the key in the on position ).. That is what needed replaced if it doesn't keep clicking...Thats the turn signal relay... What makes it blink.......Hope this helps..
Please rate this solution if it helps... Thank You.....

Nov 04, 2008 | 1996 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...