Question about 2002 Toyota MR2 Spyder

1 Answer

03 Toyota mr2, clutch noise. clutch replaced a year prior. 2 weeks before i heard some noise when shifting. 1 week before it was hard to shift a few times. then one night after driving home i parked and then tried to leave the car was in n. and tried to shift and it just grinded the gears. figured out that if i start the car in gear it would drive. in N. the car does not make any noise. with the clutch completely in the noise i hear is like a sander on a spinning disc. with the clutch in the grab area in N. the noise stops but as soon as i push it in all the way it starts again. my guess is release bearing? any ideas?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 207 Answers

I hope its your release bearing, but I had this same issue with my Audi and it turned out to be I need a new transmission, the gears are not catching it sounds like. your synchros may also be off. Does it do this in every gear, and once it does move, does the clutch slip?

Posted on Mar 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1987 toyota mr2 will not shift out of neutral when cold


have the clutch slave cylinder and master cylinder replaced
indicates air in the system and/ or moisture in the fluid freezing

Jan 05, 2018 | 1987 Toyota MR2

1 Answer

Put a cluth in a 1991 toyota mr2 turbo 2.0 and its still grinding when I shift gears.. what can I do to solvve my problem


have you replaced your fly wheel and release bearing when you changed your clutch disc?

if yes, then replace your transmission fluid.
also, if you know hot to adjust your clutch release, adjust it. adjust it in a way that you need to draw back your clutch pedal a little higher for the clutch to complete engage.

here are some ways to adjust your clutch.

1. for clutch using clutch cable. open your hood, locate for the transmision, and there you can see a cable that connects the transmision and the clutch pedal. loosen in up a little.
2. for hydrovac clutch with self correcting features. just pull your clutch pedal away from the floor for a few seconds and its done.
3. for hyrovac without self correction. manually adjust the push rod (metal rod that connects the clutch pedal to the clutch master)

Aug 08, 2011 | Toyota MR2 Cars & Trucks

1 Answer

97 honda Ex Accord Standard Transmission. Having problem shifting into 1st or reverse when starting up car. while going down road it shifts fine. week prior same problem, told son to check fluid level,...


problem is in the hydraulic clutch system
low fluid indicates a leak at the slave cylinder and not holding pressure indicates a leak at the slave cylinder or in the clutch master cylinder
If the master cylinder and slave cylinder have not been replace in side 5 years ago , the have them replace by a specialist brake and clutch shop
at this point there is nothing wrong with the clutch proper

Nov 27, 2017 | 1997 Honda Accord

2 Answers

Clutch pedal sticks to the floor; the brake reservoir was low


I believe your pressure plate is broken and at a minimum will have to be replaced along with the clutch disk.

Jul 04, 2010 | 2006 Ford Fusion

1 Answer

Automatic shift lever will not move even after overide button pushed car was under 11/2 feet of water got notor running with a little smoke from under hood but shift lever will not move it moved with...


Well given the fact that any insurance company would deem this vehicle a "total loss" I take it you know you are trying to revive a dead horse.
Have you drained the transmission.
Manually remove the shift linkage and shift it by hand at the transmission. This should give you operation of trans if it does then work on the system prior to transmission.

May 12, 2010 | 1995 Toyota Camry

1 Answer

Its really,really hard to shift into gear if at all


nothing wrong that an accredited mechanic can't fix
the clutch was installed incorrectly by the " mechanic" and the jib will have to be done again
suggest that you find an accredited qualified mechanic to do the job

Apr 01, 2017 | 1991 Toyota MR2

2 Answers

PROBLEM W/ SHIFTING 87 MR2


sounds like that the clutch disk and the pressure plate hasve worn out and they have to be replaced.make sure that the fly wheel is not worped or damaged and if it is it has to be dither machined or replaced

Dec 02, 2008 | 1987 Toyota MR2

1 Answer

2003 toyota mr2 spyder 5 speed transmission grinding noise


Here is what is going on. When you push in the clutch pedal you remove the connection between the engine and the transmission. At this time all the parts in the transmission stop rotating.Since the only parts in the transmission that can rotate without moving the car are the input parts we can safely assume that the noise can only be from there.This can be a transmission input bearing. Worn Synchro mechanism (allows the transmission to shift without grinding the gears)Low fluid in the tranny. Or a bad clutch component. Top off or change the fluid. If it still makes the noise you need to take it to a tranny shop.

Nov 30, 2008 | 2002 Toyota MR2 Spyder

Not finding what you are looking for?
2002 Toyota MR2 Spyder Logo

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...