Question about 2004 Chrysler Concorde

1 Answer

The water pump went out in my chrysler concorde lxi 2004. what all has to be replaced to fix my car. its quite expensive so far and just seeing if they are doing this correctly! alot of different things had to be replaced to fix the water pump issue. i find that a bit much! ty for ur time and help!;)

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 207 Answers

Usually when changing the water pump most shops change the timing belt and also do the timing belt adjustments, the point of it is to change it and do the service because to access the water pump you need to take all of this off and you might as well replace the cheap belt and adjust all the timing while your at it. Otherwise if 10k miles down the road it needed the timing belt job, it would be the same amount in labor all over again.

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LXI. How do I open the hood?


Chrysler Concord Repair Work.MOV - YouTube

? 8:42
www.youtube.com/watch?v=PL-hN8BkJlI
Nov 3, 2011 - Uploaded by mccrackenphillip
As I Said Here Is Ponchos 2000 Chrysler Concord It Need AHood Latch And Batt Repair. He Hit ... How To Install ReplaceBroken Hood Release Cable and Handle ... 98 to 2004 Chrysler Concorde Factory remote Transmitter ...

Sep 11, 2015 | 2004 Chrysler Concorde

1 Answer

Where is fuel pump on 99 Chrysler Concorde lxi 3.2?


Inside the fuel tank

Have to drop or remove the tank
The pump comes out the top

Sep 11, 2012 | Chrysler Concorde Cars & Trucks

1 Answer

How to change water pump/timing belt on 2002 chrysler concorde lxi


I would recommend a shop manual or maybe a DIY book. There are important steps involving the hydraulic belt tensioner.

Sep 10, 2012 | 2002 Chrysler Concorde

1 Answer

1997 Chrysler Concorde LXI. Radio works its just


Try disconnecting the battery for five minutes and then reconnect. This may reset the memory in the radio.

Sep 16, 2010 | 1997 Chrysler Concorde

1 Answer

1998 Chrysler Concorde LXI with 174K miles. 2


Problem with this is that it could be a number of things, have ur water pump checked, open the radiator and see if there is water running through it, a bad or plugged thermostat, in this case it does sound like a blown head gasket. id suggest flushing the radiator with some cleaner that u can buy at the store and check n see if ur thermostat is stuck, hope for the best and expect the worst

Apr 16, 2010 | 1998 Chrysler Concorde

1 Answer

How do you fix a water pump to a 02 chrysler sebring lxi 2.7 motor


There is no fixing a water pump, they need to be replaced with a new one.

Apr 14, 2010 | 2004 Chrysler Sebring

1 Answer

1998 Chrysler Concorde LXI V6 3.2 eng No heat with engine running and temp set for whatever, blower on any speed and controls set for any area. Car is warmed up and water level is good in reservior tank.


your heater core is plugged...bad for you this is expensive!!! or or your motors thermostat is not working..good for you.. as this is a cheap fix

Feb 26, 2010 | 1998 Chrysler Concorde

1 Answer

Chrysler Concorde LXI 4 door - 2004 The car starts up and seconds after, the RPM drops and the car shuts off. The code P0513 comes up on the computer.


That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.

May 06, 2009 | 2004 Chrysler Concorde

Not finding what you are looking for?
2004 Chrysler Concorde Logo

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...