Question about Chevrolet Silverado 1500

1 Answer

Trying to locate the ecm fuse to replace. cant find any diagrams for this or anything on it

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 4,977 Answers

The ecm fuse is in the fuse panel and is marked ecm on the fuse panel below the fuse.the fuse panel is under the dash on the drivers side,just use a test light with the key on and check all the fuses remembering the headlight/tail lights must be on and some other circuits need to be turned on.you don`t say why you are looking for the ecm fuse or the year make and model of car.

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2007 HHR, my temp gauge stops working and the same time the a/c stops blowing cold air...I called myself checking fuses and a relay, can you help?


You mean the blower motor stops blowing air , the A/C compressor is still engaged ? The temp gauge shouldn't have anything to do with the blower motor .But stranger things have happened on these systems when they are controlled by a electronic module (BCM )
Circuit/System Description
The instrument panel cluster (IPC) displays the engine coolant temperature as determined by the engine control module (ECM). The ECM sends the temperature data via high speed GMLAN serial data to the body control module (BCM). The BCM then sends the information via low speed GMLAN to the IPC in order to display the engine temperature.
The BCM applies voltage to the blower motor through the HVAC relay. The resistors and the blower motor are in a series circuit. The following list represents the number of resistors in series with the blower motor per particular speed request:
• Low speed--4 resistors
• Medium 1 speed--3 resistors
• Medium 2 speed--2 resistors
When the operator requests High speed, the HVAC control assembly applies ground directly to the blower motor through the high blower motor control circuit.
Do you know anything about automotive serial data communications ? GMLAN Is general motors version of C.A.N controller area network .

How to Diagnose Controller Area Network CAN

Do you know anything about diagnosing automotive electronics ? Using a digital volt ohm meter ? Using wiring diagrams to pin point locations in a electrical circuit for testing ? Do you know what a factory componet location diagram is ? It takes more then looking at fuse's an relays , to see if current is flowing in a electrical circuit .

Electric Testing Techniques You Need to Know

ECM Inputs and Outputs Diagnosis

http://www.bbbind.com/free_tsb.html Free wiring diagrams ! Enter vehicle info. Year , make , model and engine size ! Under system click on HVAC , under subsystem HVAC Controls . Then click the search button , then click the first blue link . This is the blower motor control diagram . Do you know how to read a wiring diagram ?

Apr 30, 2017 | Cars & Trucks

1 Answer

Location of anti theft fuse on 2008 ford focus


Fuse 20 is the ECM fuse. No car would have one specifically for the antitheft circuit as you could pull the fuse and drive away. The ECM runs the antitheft system as well as the engine management. As long as the chip in the key matches the chip in the ignition lock, the ECM will release power to the ignition circuit.

Do you have an OBD11 code reader or access to one? That may tell you where the fault is.

http://www.gridgit.com/postpic/2009/11/ford-focus-fuse-box-diagram_486663.jpg

http://circuitswiring.com/2008-ford-focus-5d-r-fuse-box-diagram/

fuse on 2008 ford focus Google Search

Dec 18, 2016 | Ford Cars & Trucks

1 Answer

Where is the fuse for a fuel pump on my 2003 dodge diesel 2500 located?


there is no fuse at all for that model. It is controlled by the ECM. you need to replace the ecm

The ECM is located on the left side of the engine block right behind the fuel injection pump remove the connector from the ECM and check the terminals very carefully sometimes you'll find corroded terminals or broken wires causing the same problem. hope this help out.

Apr 26, 2016 | Dodge Cars & Trucks

1 Answer

Location of ECM fuse box 1999 Cadillac seville


On this website you find information (diagram, description and location) about fuse boxes in Cadillac Seville (Fifth Generation; 1998 - 1998)

Maybe it help you.

Cadillac Seville mk5 Fifth Generation 1998 1999 fuse box diagram Auto...

Feb 17, 2014 | 1999 Cadillac DeVille

1 Answer

P0340


I think the 2004 Accent only came with a 1.6 liter engine as far as I know. In any case below is as much information I have as far as your code including a wiring diagram of that circuit (CMP sensor). The wiring diagram doesn't tell the wire colors but does tell you where the wire goes or what "pin" number it is at the connectors. I included the connectors which is by number and marked the ECM connector for you. I had a picture of the CMP sensor location but not the ECM location but can tell you the ECM connector is located behind the dash fuse panel. Hope this helps....

3_15_2012_9_38_42_am.jpg3_15_2012_9_39_12_am.jpg

3_15_2012_9_39_37_am.jpg
3_15_2012_9_40_01_am.jpg

3_15_2012_9_40_24_am.jpg3_15_2012_9_40_49_am.jpg

3_15_2012_9_41_15_am.jpg

Mar 14, 2012 | Hyundai Motor 2004 Accent

1 Answer

The check engine light is on. i tried talking with the ECM with a mt 2500 snap-on scanner.the scanner reads no communication. do the haynes manuals have wiring diagrams,and because the ECM;S are under the...


Check the fuses. you will have one for ecm, also check the cigarette lighter fuse. they some times the dlc in with that fuse. it is best to remove the fuse when checking, I have found that they loose contact and removing them fixes problems. Haynes manuals do have electrical for the computers.

Nov 17, 2010 | 1998 Jeep Grand Cherokee

1 Answer

No tail lights


You should have a fuse panel under you dash inside. This is where the fuses are located for lights. Don't know the exact location, but you can pull each fuse to see if it is bad. This won't hurt anything. It just keeps you from hunting down a diagram of where the fuse is located.

Apr 20, 2010 | 2008 Scion Xb

1 Answer

Fuel problems cant get car to start


FUSE SHOULD BE UNDER THE DASHBOARD ON THE DRIVERS' SIDE. WHEN YOU CHANGED THE PUMP, YOU NEED TO CHANGE THE FUEL FILTER AS WELL TO MAINTAIN THE WARANTY. I WOULD CHANGE THE FUSE AND FILTER. HOPE THIS HELPS. LET ME KNOW HOW YOUR DOING. BEST OF LUCK

May 01, 2009 | 1986 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

619 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...