Question about 1993 Ford F150 SuperCab

1 Answer

Standard. Shifter arm swings back and forth. Won't go into gear while running.

Posted by on

  • fujichang16 Mar 24, 2011

    I've just got back from garage. For the 3rd.time! Had master cylinder slave cylinder,clutch replaced. Slave blew 2 weeks later. Drove home tonite put in reverse arm let go. Why me.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 127 Answers

If it wont go in gear when running but will when it is not running it is the clutch.. You might try to have it adjusted

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i fix broken shifter on 2003 ford super Duty , automatic ? Seems like a pin broke and i cant put it into gear or out .


hey look under neath where ur driver footpedals are. chances are that the rubber grommet on the end of ur cable came off or broke.. look up into the column area an look for the black cable goin to a pivot point on shifter arm. reconnect. but will prob need new cable cause if end is no good will fall of again. move shifter back an forth to help u locate area of cable

Jun 28, 2015 | Cars & Trucks

1 Answer

2000 vw beetle will not shift from 2nd to forth gear how to fix?


could be the shifter cable is bad. would need to be inspected to see if things are working right

Feb 12, 2015 | 2000 Volkswagen Beetle

1 Answer

1998 arctic cat 300..... hard to shift you have to


I do not know much if anything about an arctic cat but if you have a shifter you have some kind of a transmission and if you need to get it into gear or neutral but cannot do so without rocking the machine or the shifter back and forth a slipping clutch would not likely have anything to do with the problem. You likely should not be trying to shift gears with the clutch engaged and the clutch normally should be FULLY slipping ie completely disengaged when you are shifting. It sounds like you could have sticking shifter linkage parts, worn shifter parts or internal transmission parts, bent shifter forks, worn shifter cam or drum grooves or shifter fork pins or other worn parts or maybe even low or no transmission fluid.

Oct 05, 2014 | Cars & Trucks

1 Answer

My gmc 2006 won't move in gear


happened to me. Have someone move the shifter back and forth while you are under the truck in the transmission area. In my case the rod clip broke from the shifter to the transmission. Lined it up and put a tie wrap on it to hold them together. This should do until you get the 20.00 part. MMake Sure To Block The WHEELS!!

Sep 19, 2012 | 2006 GMC Sierra

1 Answer

When driving frequently the vehicle will start swinging back and forth like you are moving the steering wheel back and forth you let off the gas and it quits for awhile been aligned and checked why?


was the suspenssion checked out before the alignment was done?? something is loose/worn out. i would be looking at the lower control arms/bushings on lower control arms.something tells me that who ever did the alignment didnt check out the suspenssion the right way or at all. you can not do alignment if stuff is loose.

Sep 17, 2012 | 1988 Nissan Pathfinder

1 Answer

4 Door 97 Ford Escort with automatic gear shift moves freely back and forth and is not connecting to any gear. Any suggestions?


The shifter cable attaches to the arm on the side of the transaxle.
Look under the hood and locate the cable coming from the firewall.
You can set the parking brake and move the arm if the cable is broke.

Jul 13, 2012 | Ford Escort Cars & Trucks

3 Answers

1964 c20 chevy p/u 3spd on the column .the shifter gets hung up in 1st and/or reverse when trying to shift to 3rd/4th any pictures available on line @ no cost that shows and tells steering column...


the older column shifters can be a problem, look at where the shifter arms hook to the transmission
there should be some plastic bushings on the end of each arm that nay be worn out and cause this problemtry replacing these bushings first when they are worn they won't align the shifter arms to lighn up for the next gear and the trans will have a tendency to hang between gears

May 03, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

1994 chev lumina, trans problems


If there is a delay(like 2-3 secs) when you shift from neutral to drive...then down to reverse...most likely the transmission is screwed,or on its way out.
Is the Fluid level correct?,and is the fluid red or dark and smelly ?.

Dark and smelly IS NOT A GOOD SIGN.--means the fluid has been overheating ...


Dec 30, 2008 | 1994 Chevrolet Lumina

Not finding what you are looking for?
1993 Ford F150 SuperCab Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...