Question about 1993 Buick Century

1 Answer

Unable to open the driver side front door of my 1993 Buick Century Custom. I have taken the door panel off and have all of the linkage and locking mechanism apart.Having diffulculty remembering how it goes back. is there any place I can find a diagram of this to help me get it back together. All of this for a small plastic piece that had broken.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,608 Answers

Your best bet is to remove the door panel from the other side and this will help you see how it goes together.This is in case you can`t find any other info.Hope this helps.Good luck.

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 buick century door wont open


Use a Slim Jim to pop the door open or have AAA do it for you. Once open take apart the interior side of the door to gain access to the door lock mechanism and reattach the control rods for the lock with new clips.

Jul 16, 2014 | 2000 Buick Century

1 Answer

1999 Buick Century Custom Security light blinks and car will not start


someone told me to by getting out of the car and locking the driver door with the key, going to the front passenger door and unlocking, then relocking the door using the key. I have to repeat this step 2-4 times and eventually it will start. ?????????
This has nothing to do with it starting !

This is what's happening , Inside the lock cylinder are contacts that read the resistance of the pellet on the key , the contacts are getting worn out . You have two options , replace the lock cylinder or by-pass it all together .
The PASS-Key II® ignition key (1) contains a unique resistor pellet which is idenified by the Body Control Module (BCM) (2). There are 15 different key (resistor) codes. Only one ignition key resistor pellet code will work with each PASS-Key II® theft deterrent system.
Ignition Key Lock Cylinder
The ignition lock cylinder contains spring loaded contacts which make physical contact with the ignition key when it is inserted into the ignition lock cylinder. This allows the ignition lock cylinder to provide the Body Control Module (BCM) (2) with the resistor code embedded in the ignition key.

GM VATS Key Resistor Key Security Bypass
http://www.autopartswarehouse.com/sku/Buick/Century/Standard/Ignition_Lock_Cylinder/1999/SIUS222L.html?apwcid=bngpla

Jun 29, 2017 | 1999 Buick Century

1 Answer

Have no dash lights, unable to located fuse box ,in my 2003 Buick Century.


The instrument panel fuse block is located on the passenger side end of the dash, visible when the door is open. The underhood fuse block is located on the passenger side.

Oct 11, 2011 | 2003 Buick Century

1 Answer

What is a possible list of causes that could come from the driver side door not opening at all in your 1993 Buick Regal?


Door mechanism came apart inside the door. This can be a real pain if you cannot open it at all. You will need to take out all of the screws inside door handle and behind it. Pop out the plastic holding pieces that keep the door trim stuck to the metal part and pull the trim up and over a little bit to try to get to the linkage and get it open. Then you can pull the trim up quite a bit and see what linkage came apart and try to snap it back together and/or replace the linkage. Have you tried to open it from getting inside it? Sometimes when the linkage fails you can still open it from either side. Hope you get it going with this info and thanks for using FixYa.

Jan 20, 2011 | 1993 Buick Regal

1 Answer

Replace the drivers side door for a 1993 buick century


open door on the hinges there will be a pin in each holding the door part to car part remove hinge pins and door is free dont 4get wires though

Apr 02, 2010 | 1993 Buick Century

2 Answers

98 buick century power windows dont work


CHECK POWER WINDOWS 20 AMP CIRCUIT BREAKER.

Jan 24, 2010 | 1998 Buick Century

4 Answers

I have a '93 Buick Regal Custom. Last year I was unable to open the passengers door from the outside, I can open from the inside but not outside. I lived with it until now. The drivers door is doing the...


I have this problem every year with my car, 1993 buick regal custom, 3.8. What happens is it gets cold, warms up a bit, and ice or snow melts and gets in the door, then it gets cold again and it freezes. I go to unlock and open the door from the outside and this problem arises.

There is a vertical rod on the left side of the drivers side, right side of the passenger side, that gets bent, from trying to open the door when that mechanism is frozen up. Just bend it back, a TINY bit and it will start working.

I got tired of taking my door apart every time it happened so i cut a little "door" in the cover thing, so i can get at that bar.

I also tried coating it in grease and that seems to lessen the frequency.

Jan 05, 2010 | 1993 Buick Regal

2 Answers

I have a 1992 buick century custom. The end of the door opener handle inside on the drivers side just broke off so the door will not open from the inside. I can see what needs replacing. I cant see how to...


There is a " C " clip attached to the window handle, which secures it to the mount. . A special claip removing tool is required . Hope this helps.

May 02, 2009 | 1992 Buick Century

Not finding what you are looking for?
1993 Buick Century Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...