Question about Toyota Passenger

2 Answers

Headlight out, - cannot seem to find how to change it out without damaging the front molding.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,915 Answers

You don't say what year or model it is, but on most newer headlight housings you remove the bulb from the back of the housing by twisting it out.

Posted on Mar 23, 2011

Almost all front and most rear lamps, are in
lamp housing assy's, that have to be removed to access
the lamps/bulbs

You will have to look from inside the engine compartment
to find the screws that have to be removed

Posted on Mar 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the indicator bulb in the front? I can't find a way to do this without removing the entire headlight.


I have found a professional video published on YouTube of the entire process of replacing the bulb on a 1998-2005 Chevy Blazer.

Nov 09, 2011 | 1998 Chevrolet Blazer

1 Answer

Headlight bulb burnt out. Upon replacing bulb, found the plug had been hot and burnt the plastic mold around plug. The prong hole was also black. New replacement bulb also burnt out immediately.


Welcome to Fixya
This is a common problem with headlight bulb higher than the 60W bulb. You can actually replace the plug with a ceramic type so that it wont melt. This happens to my car. I am using halogen bulb and burned the plastic mold together with the bulb. Replacing the plastic mold with ceramic type mold fixed the problem.
Thank you for using Fixya!

Jun 14, 2011 | 2006 Pontiac Grand Prix

1 Answer

Remove headlight 2002 toyota mr2


Believe it or not, this is the headache to remove and replace the headlights:

Removal & Installation
  1. Remove the front bumper cover.
  2. Remove the tool box and the luggage compartment trim (carpet).
  3. Remove the 2 bolts and the nut.
  4. Disconnect the connectors, then remove the headlight

c17hydro_152.gif
  1. Front bumper cover removal-MR2



c17hydro_153.gif

To install:

  1. During installation, if the headlight is damaged, it can be reinstalled by installing new retainers.


c17hydro_154.gif

If the headlight is damaged, cut off these retainers



c17hydro_155.gif

Install new headlight retainers

Apr 19, 2011 | 2002 Toyota MR2 Spyder

1 Answer

Cobalt 2005 ls headlight bulb replacement


Instructions Things You'll Need:
  • 9007 LL halogen headlight bulb
  • Wrench
  • Gloves or clean rag
  1. Step 1 Set the parking brake and remove the keys from the ignition to ensure your Chevy Cobalt won't roll while you're replacing the headlight bulb.
  2. Step 2 Open the hood by pulling the hood release latch located under the instrument panel on the driver's side of the car. Locate the secondary release latch on the front of the hood at the center, slightly towards the driver's side. Slide the latch to the left to release the hood and raise it.
  3. Step 3 Locate the headlight assembly and remove the bolts by turning them counterclockwise. Set the bolts aside in a safe place, so you won't misplace them.
  4. Step 4 Remove the plastic fasteners from the headlight assembly molding. Carefully pull back the front fascia, or molding. You may need an extra pair of hands to perform this slightly awkward task.
  5. Step 5 Grab the headlight assembly and pull it towards the radiator at a slight angle to remove it. This should provide easier access to the headlight bulb and wiring harness.
  6. Step 6 Lift the plastic locking tab on the wiring harness to disconnect the bulb base. Then, disconnect the wiring harness from the bulb socket and remove the black retainer by turning it counterclockwise.
  7. Step 7 Disconnect the bulb socket by turning it counterclockwise. Remove the old bulb from the socket by firmly, but gently pulling it straight out.
  8. Step 8 Replace the old bulb with a new 9007 LL halogen headlight bulb. Put your headlight assembly back together by reversing the steps when you disassembled it. Use 89 inch-lb torque when retightening the headlight assembly

Feb 26, 2010 | 2006 Chevrolet Cobalt

1 Answer

How do you change headlight on Chevy 2008 Cobalt?


Open the hood by pulling the hood release latch located under the instrument panel on the driver's side of the car. Locate the secondary release latch on the front of the hood at the center, slightly towards the driver's side. Slide the latch to the left to release the hood and raise it Locate the headlight assembly and remove the bolts by turning them counterclockwise. Set the bolts aside in a safe place, so you won't misplace them.Remove the plastic fasteners from the headlight assembly molding. Carefully pull back the front fascia, or molding. You may need an extra pair of hands to perform this slightly awkward task.Grab the headlight assembly and pull it towards the radiator at a slight angle to remove it. This should provide easier access to the headlight bulb and wiring harness.Lift the plastic locking tab on the wiring harness to disconnect the bulb base. Then, disconnect the wiring harness from the bulb socket and remove the black retainer by turning it counterclockwise.Disconnect the bulb socket by turning it counterclockwise. Remove the old bulb from the socket by firmly, but gently pulling it straight out.Replace the old bulb with a new 9007 LL halogen headlight bulb. Put your headlight assembly back together by reversing the steps when you disassembled it. Use 89 inch-lb torque when retightening the headlight assembly bolts.

Sep 05, 2009 | 2008 Chevrolet Cobalt

1 Answer

2000 Chevrolet Blazer Changing Low Beam Headlight


the metal ring is the retainer for the bulb. you should be able to get at it from the front area without taking the grill loose. most of those only have 2 little phillips head screws. remove the screws and the bulb will come out. unplug it and the new one goes right back in. installation is the reverse of removal.

Jul 19, 2009 | Chevrolet Blazer Cars & Trucks

2 Answers

Moisture in headlight assembly, 2004 toyota seinna van. How do I take out to reseal or replace? It is the assembly on the passenger side.


Once the factory seal is leaking moisture, it can be hard to dry and reseal. You can try a hir dryer, and then look for a seam to lay silicone on, but the recommended fix is to replace the whole headlight assembly. The lens is not removable like on older lamps. The pieces are molded, and then epoxied together. Hard to split apart and get back together without damaging. Try a salvage yard.

Mar 20, 2009 | 2004 Toyota Sienna

2 Answers

Replace front head lihgt bulsbs on 350 z


you should be able to access the connector and bulb without removing headlight assembly. lift the hood and you should see the connector behind the headlight.

Aug 29, 2008 | 2003 Nissan 350Z

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...