Question about 2007 Hyundai Entourage Limited Minivan

1 Answer

I need to change the front right turn signal bulb on a 2008 Hyundai Entourage. Looks like I have to take off the whole assembly, which is fine, but how many bolts/nuts are they to remove.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

There are two 10mm bolts on top side and another one at its back side. However, removing these bolts isn't enough. You also have to remove a 10mm bolt at the front grill (on top, next to the headlamp assy) so the bumper/grill bezel can be moved a little to the side to allow you clearance to remove the headlamp assy.

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How How do i change the headlight bulb on the drivers side of my 2007 Hyundai Entourage?


You have to take the black plastic top off under the hood on the front.....than you take the whole headlight out, I believe it's only two bolts...there is opening for each light and they are pretty simple to change.

Jul 04, 2014 | 2007 Hyundai Entourage Limited Minivan

1 Answer

How to change stop light globe on 2008 hyundai getz


Remove the two 10 mm (head) bolts that hold the stop light. This bolts are between the tail light assembly and the tail gate weatherstrip. You can see them without having to remove anything.

By using a masking tape wrapped flat screwdriver, pry "back" the whole tail light assembly. Once out, you can twist the brake light (or reverse, or turn signal) bulb plug, remove and replace the bulb.

The Getz uses standard two filament brake globes (1/4 turn to install).

May 12, 2014 | 2008 Hyundai Getz 1.6

1 Answer

Turn signal


2 questions are , double charged here.(LOL)
1: lost the operators guide?, Hyundai gives them away.
2: google for it, it's there. i promise. down load it and be empowered again.

same size s last one.
and the guide tells you how to replace it. front or rear?

or look here.
alldata dot com.
its all there.

Oct 12, 2013 | 2008 Hyundai Entourage

1 Answer

Change turn signal bulb


front or rear? rear can be accessed by lifting the hatch .then remove the screws from the lens . front either under the hood,or may need the remove the light

Aug 21, 2013 | 2007 Hyundai Entourage Limited Minivan

1 Answer

2008 Entourage right turn signal blinks 2x faster. Does this mean i need to replace fuse? Where is fuse located?


you might have a blown bulb. turn on 4 way flashers (hazard lamps), walk around vehicle and see which one is not working. Replace burned lamp.

Aug 07, 2012 | 2007 Hyundai Entourage Limited Minivan

1 Answer

How do I change the passenger front turn signal bulb on my 2007 Hyundai Entourage


with great difficulty,i think this model requires the headlight to be removed

Apr 05, 2010 | 2007 Hyundai Entourage Limited Minivan

1 Answer

How to R&R a front Turn signal bulb from a 2007 Hyundai Entourage


look at position of bulb inside lamp assy then open bonnet feel behind h/lamp at location of indicator bulb you will locat the bulb wire socket turn this socket anti clockwise slightly it will release the socket complete with bulb pull it out then fit new bulb make sure bulb is correct one! ie the locating bayonet pins are same ? then refit socket with new bulb in reverse sequence test working

Nov 08, 2009 | 2007 Hyundai Entourage Limited Minivan

2 Answers

Need to access the front left turn signal bulb to replace it.


front left what?? drive shaft/track end/something fell off/ ??indicator bulb??

Sep 20, 2009 | 2007 Hyundai Entourage Limited Minivan

6 Answers

How do I change the headlight bulb in a Hyundai Entourage? We cannot get at the bulb.


I changed a Right Front low beam bulb this morning on a 2007 Entourage. You have to remove the two bolts on top, use a 10mm socket, then you wiggle side to side and pull the entire headlight assembly forward. The headlight gets caught a little behind the grill so you have to pull sideways a little then forward with a little force. I heard some scraping plastic but nothing broke. Then you remove the black round cap in the back and change the bulb.

Apr 21, 2009 | 2007 Hyundai Entourage Limited Minivan

Not finding what you are looking for?
2007 Hyundai Entourage Limited Minivan Logo

1,073 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...