Do u have a picture of a window regulator part for a 95 lincoln

There is no "reset" procedure.

Does the window regulator motor make a sound when you press the switch for window to go up or down ?

If you hear motor running, it would be the window regulator that is bad.

If there is no noise, you would have to check for power at the switch, if you have power here, then check power at the other end of harness, where it attaches to the regulator motor. If you have power at this end, you may have a bad motor.

94 Town Car Window Regulator and Motor this is a video on removing the window regulator. Not sure if it has to come out but this shows you how to unhook it from the regulator. after it is unhooked you can wiggle it around to the right position to pull out the window

For all types of power window problem and power windows not working,i suggest you to go through the help links given below. Click the link to go through its procedure to troubleshoot the problem :------

Power window problem
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------

Power windows not working after car wash?http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------

power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
------------
All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html
-------------

Complete Diagnosis & Testing Power Windows?

http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html
-----------This will help.Thanks.

You have a broken window regulator. The door must be disassembled to replace the regulator.

place window glass in full up position, remove the three 1/4 inch rivets retaining window regulator electric drive bracket to inner panel,separate window regulator from frt door minus motor,through the access hole remove window reg bracket from inner panel and slide to gain access

i do theses regulators all the time . its not hard to change the motor . you may need to drill out the rivits and replace them with bolts and nuts

THE WINDOW REGULATORS ARE NOTORIOUS FOR GOING BAD ON THESE CARS. REMOVE THE INSIDE DOOR PANEL TO ACCESS THE REGULATOR IN THE DOOR. YOU WILL HAVE TO PULL AND PROP THE WINDOW IN THE UP POSITION TO REMOVE THE OLD REGULATOR. HOPE THIS HELPS. KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. BEST OF LUCK.

If the window regulator motors are running & the glass is not moving, then either the drive assembly is broken & you need new regulators - which is the most probable cause, or the bottom window channel that it hooks to, got unhooked or separated from the glass. Hope this helps you, Rick