Question about Hyundai Accent

1 Answer

Passenger headlight has been dim for months even after replacement. I just got new headlight now both both filaments (high and low beam) light up and then jump to drivers side causing all to dim. Can I jump right off driver side wires at light?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 8,190 Answers

Hi, can you tell me your model and year so i can check how the headlight circuits are arranged?
Also, I'm not quite clear what you are saying. Is one side dim and the other normal?

Posted on Mar 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver side headlight goes dim on high beam while passenger side is bright


bad connection or bad earth check all connection or bulb

Jan 24, 2016 | Cars & Trucks

1 Answer

Driver side low and high beam on but dim. Passenger side low beam normal but high beam on and dim


I would check for the groundwire continuity

Driver side - dim low beams and no hi beam - Subaru Outback ...

www.subaruoutback.org > ... > General > Electrical & Electronics
Oct 11, 2014 - Hi everyone, My drivers side headlights are dim on low, (car has separate bulbs ... When the headlight switch is turned ON, but for low beams, ...

Driver-side Low beam Not Working (electrical issue not bulb ...

www.hummer4x4offroad.com/.../showthread.php?...Driver-side-Low-be...

Mar 12, 2015 - 10 posts - ‎4 authors
The high beam continues to work on both sides...I pulled the Driverside headlamp fuse and then both left and right beams lit up but very dim.

High beams ok, but not low beam - one side only - TDIClub Forums

forums.tdiclub.com > ... > VW MKIV-A4 TDIs (VE and PD)
Jan 23, 2014 - My driver's side lights are working fine - high and low beams. ... But it definitely looks like the big lamp on the driver's side gets brighter when ..... Drivers side headlight is very dim on low beam and goes out when on high beam ...

Dim driver's side headlight (low & high beam) - GrandAmGT.com Forum

www.grandamgt.com > ... > Technical Q&A

Dec 11, 2002 - 6 posts - ‎4 authors

Jan 04, 2016 | Cars & Trucks

2 Answers

What would cause the low beam headlight not to work when all other lights work?


If you have standard halogen bulbs:

  1. Burned out light bulb; or
  2. Fried wires between the dashboard wiring harness and the headlight bulb connectors; or
  3. Fried headlight bulb connectors.
If you have HEI emitters:
  • Failed ballast.

May 11, 2015 | 2002 Mercury Grand Marquis

1 Answer

CHANGED HEADLIGHT ASSEMBLY ON 2002 JEEP LIBERTY ONLY HIGH BEAM LIGHT COME ON


Try flicking the mulit-function switch high beam on and off. There has been known problems with this switch, but mostly the first place to start is with some new light bulbs.
Or possibly your low beam filaments are burnt out. You have to replace the bulbs. Each bulb has a lowbeam and a high beam filament.

Apr 10, 2013 | Jeep Liberty Cars & Trucks

1 Answer

2003 Pontiac Grand Am brights work but ONE low beam is out ...


You most likely need a new low beam headlight BULB.It has the low and high beam in it and the separate high beam has only high.
You SHOULD have 2 tabs ,one at each end to pull up and the headlight assembly should then come out easily.
Tapping a blown out headlight can reattach the filament for a short time but after that replacement is necessary.

Mar 12, 2017 | 2003 Pontiac Grand Am

1 Answer

Hello. i have a 06 pt cruiser limited edition. my low beam light on passenger side does not operate,but the driverside low beam does.my high beam,tail lights directional signal all work. what could be the...


your headlight bulb may have a high & low beam filament in it, if so the low beam filament is blown & you will have to replace the bulb.......cheers

Aug 16, 2011 | 2006 Chrysler PT Cruiser

1 Answer

2002 Dodge Caravan headlamps: one works on dim the other works on high beam but not together. Also only one daytime running lamp.


Your van has dual diligent headlamp bulbs, that means each headlight has one bulb that serves as high beam and low beam. What has most likely happened is on one side the low beam filament has burnt out, and on the other side the high beam filiment has burnt out. The daytime running lights are just the high beam filament running on reduced power, so if the high beam doesn't work on one side, that same side will have no daytime running light. Replace both headlamp bulbs with matching, good quality bulbs.

Mar 06, 2011 | 2002 Dodge Grand Caravan

1 Answer

Have headlight problem 2002 chevy malibu v-6 on the dim side have electria current on both wires to the blub bright beams function normal


if you have power to both headlight plugs for each low and high beam filaments and the ground is good as you say the high beams function normally then you either have bad low beam bulb filaments,poor or dirty connection or you have a daytime running headlight relay on the car and that is the problem with the low beam lights.yes the high beams will work but not low beams if it is the relay.

Mar 04, 2011 | 2002 Chevrolet Malibu

1 Answer

When low beam headlight is on passenger sign is


Try this to eliminate new bulbs for both sides:
With a partner behind the wheel:
PULL out the bulbs one at a time. Keep them plugged in. While you are holding the bulb - have your partner click and HOLD the High Beam Selection. This causes the Low Beam and High Beam filaments to both go on and stay on.
Check both sides this way.
While the bulbs are out, look at the filaments that did not illuminate. Are they broken, bent, or have indications they are burnt out?
You can also change to bulbs (left to right, right to left) and recheck using the above method of holding the high beam selector and checking the filaments.

Jan 04, 2010 | 2001 Dodge Grand Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...