Question about 1992 Toyota Pickup

2 Answers

I have a 1992 toyota pickup 4x4 it misses real bad while im driving and the check engine light wont come on so therefor i can pickup any codes...while drivin it will cut in and out REALLY bad the rpms will die down then come back up repeatedly i can pull over shut it off for 5 seconds crank it up and it wont do it again for a little ways down the road,,,ive put plugs plug wires fuel filter distributor cap and rotor on it put heet in the gas i dont know what else to do can anyone help me please?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 136 Answers

First thing I would check is the connector to the mass air flow sensor. It should be a cylinder in line with your air intake tube with a wiring connector on it. Clean the connector and reseat the connector securely. If that doesn't work, get MAF cleaner and clean the inside of the sensor itself. Only use MAF cleaner, not intake or carburetor cleaner.

Posted on Mar 23, 2011

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Contributor
  • 299 Answers

Check converter , maybe clogged , the fuel filter under the hood been changed? if light won't come on its fuel related, pump maybe going bad check pressure .

Posted on Mar 23, 2011

  • michaelhaske Jan 03, 2012

    Timing chain needs to be checked and valves for psi

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1992 Toyota 4x4 pickup key won't turn all the way off without disconnecting the battery. What could cause this?


is this a console shift? if so its most likely not getting the signal that its in park. There is a switch on the shifter that wont the key be removed without the vehicle being in park.

Oct 12, 2014 | 1992 Toyota Pickup

1 Answer

1992 Toyota 4x4 V6 engine


check for a failed cat converter as it may be blocking the exhaust system

Oct 30, 2013 | 1992 Toyota Pickup

1 Answer

I have a 1992 Toyota pickup 4x4 4 cylinder. The computer set code 21 which is the oxygen sensor. I replaced the oxygen sensor and disconnected the battery to clear the code. I reconnected the battery...


The code shows oxy. Sensor , this means there is something tripping the sensor . Could be fuel delivery , catalyitic converter , or something else . .....

Jun 11, 2017 | 1992 Toyota Pickup

1 Answer

I have a 1992 toyota pickup 4x4 2.4 manual trans that trys to engage into 4 wheel drive on its one and whene i want it to it wont go in 4 wheel drive. I ALSO NOTICED that the 4x4 indercator light will...


G'day mate yes you have a prob and i think it is empty 'transfer' case Toyota had a big prob with transfer case pushing oil into gearbox , result transfer case empty gearbox full. fix is when you get the transfer case off (maybe have stripped and checked ) then drill a small hole in the front of the transfercase at gearbox filler bung height and run the same oil in both if its a manual that is. hope this helps

Apr 04, 2010 | 1992 Toyota Pickup

1 Answer

Ware is the fuel filter on 1992 toyota 4x4 pickup


1992 toyota pickup 4wd V6 3.0L SOHC. The fuel filter is located on the right frame rail underneath the passenger compartment.

Mar 28, 2010 | 1992 Toyota Pickup

1 Answer

NO FIRE


check for compression. it might be burnt valve

May 20, 2009 | 1992 Toyota Pickup

2 Answers

1992 4x4 toyota does not idle.


After it dies, then you restart, does it run fine for about 30 sec, and then go to ****?

Feb 28, 2009 | 1986 Toyota Pickup 4WD

Not finding what you are looking for?
1992 Toyota Pickup Logo

405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...