Question about 2003 Chrysler Town & Country

2 Answers

Hard start first thing in morning - 2003 Chrysler Town & Country

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 693 Answers

Could be anything but would start with the choke, good luck

Posted on Mar 23, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Expert
  • 1,114 Answers

This could be a number of things, I would recommend that you start with the simplest things first, like changing the fuel filter, spark plugs, and the air cleaner.

Posted on Mar 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hard too start in morning


car is hard to start in the morning....... - CB7Tuner Forums

www.cb7tuner.com/vbb/showthread.php?t=72031
Mar 23, 2007 - 20 posts - ‎11 authors 93 f22a ....only hard to start in the morning...after its started once, ... mine does this too... only at a cold start it'll crank a few times too many ...

Oct 01, 2015 | Cars & Trucks

1 Answer

Car won't start


The battery is fine, there could be several things, starter, ignition, dirty or loose battery connections, here is a good site to help you troubleshoot.

autocom diagnostic tool

Jul 04, 2012 | 1999 Chevrolet Blazer

1 Answer

Hi there my car had a very hard starting in the morning and we changed he heater plugs but i still face the same problem pls help me its a nissan navara 2004 pick up


Change the fuel filter and if it still is hard to start..the next morning turn the switch on for 5 second then off then on again then off. then try to start it . if it start right up change the fuel prresure valve .. Check it.. Last thing if all else fail is to replaced the fuel pump.Good luck!!!

Nov 03, 2010 | Nissan Hardbody Cars & Trucks

1 Answer

When turning steering wheel to left very hard to turn untill car starts to move, when turn to right works fine


Sounds like the begining of a bad rack n pinion. We can eliminate the pump because the car turns to the right fine. There is no loss of fluid? The only thing left is the rack. It is a fairly commin issue. Use to call it morning sickness, The cars would be hard to turn in the morning or when first started but after running and warming up for a while they would start to work properly.

Jan 20, 2010 | 2000 Pontiac Grand Prix

1 Answer

1989 jeep cherokee hard starting first thing in


put some new plugs in and the gap should be 25th

Jun 27, 2009 | Jeep Cherokee Cars & Trucks

1 Answer

Hard starts in the morning even though replaced most parts


Check the power to the cold start injector. (it's only going to have fire for a few sec. after the key is turned on). If the fire is good, replace the cold start injector. This injector is activated for a few seconds when the engen temp is low to add a little fuel lower down in the intake and closer to the pistons.

May 20, 2009 | 1994 GMC Jimmy

1 Answer

Hard to start first thing in morning


I found the fuel rail shrader valve core was leaking out gas overnight. In the morning no gas in the system, started it and pumped the pedal, it started. I removed the shrader valve core and put in a new one. Fixed. A shrader valve core is like the one in your tires where you put air in, if it's loose it will leak air, if the seal is gone it won't hold air.

Mar 22, 2009 | 1993 Jeep Grand Cherokee

1 Answer

Hard starting


Coolant temperature sensor sounds like it went bad. It is reading that the engine is warm all the time, so the computer is not commanding additional fuel for startup. Easy and cheap fix.

Jul 13, 2008 | 1997 Ford F250 SuperCab

Not finding what you are looking for?
2003 Chrysler Town & Country Logo

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...